Relating Lubricant Film Thickness to Contact Fatigue

1970 ◽  
Author(s):  
Charles H. Danner
Keyword(s):  
Film Thickness ◽  
Contact Fatigue ◽  
Lubricant Film ◽  
Lubricant Film Thickness

Pressure Distribution Within EHD Point Contacts Based on Measured Film Thickness

Tribology ◽  
2006 ◽  
Author(s):  
Radek Poliscuk ◽  
Michal Vaverka ◽  
Martin Vrbka ◽  
Ivan Krupka ◽  
Martin Hartl
Keyword(s):  
Film Thickness ◽  
Numerical Solution ◽  
Pressure Distribution ◽  
Elastic Deformation ◽  
Contact Fatigue ◽  
Lubricant Film ◽  
Rolling Contact ◽  
Lubricant Film Thickness ◽  
Machine Elements ◽  
Lubricated Contact

Surface topography significantly influences the behavior of lubricated contacts between highly loaded machine elements. Most oil- or grease- lubricated machine elements such as gears, rolling bearings, cams and traction drives operate in mixed lubrication conditions and the lubricant film thickness is directly related to the main practical performance parameters such as function, wear, contact fatigue and scuffing. For determination wear and especially contact fatigue, the values and distribution of the pressure in rolling contact are required. The theoretical studies usually involve the numerical solution of pressure and film thickness in the contact, using some physical mathematical model built around the Reynolds equation to describe the flow and the theory of elastic deformation of semi-infinite bodies. Such calculations can be extremely time consuming, especially when lubricant films are very thin and/or contact load very high. This study is aimed at obtaining pressure distribution within lubricated contact from measured film thickness. Lubricant film thickness distribution within the whole concentrated contact is evaluated from chromatic interferograms by thin film colorimetric interferometry. Consequently, an elastic deformation is separated from the film thickness, geometry and mutual approach of the surfaces. Calculation of the pressure distribution is based on inverse elasticity theory. EHD lubricated contact with smooth surfaces of solids was first investigated. Calculated pressure, distributions were compared with data obtained from full numerical solution to check the accuracy. The approach was also applied to surfaces with dents and their influence on distribution of pressure in lubricant film.

Study of Direct Measuring of Lubricant Condition in Rolling Element Bearings With Microcomputer Technique

1990 ◽  
Vol 112 (1) ◽  
pp. 92-97 ◽  
Author(s):  
Dongchu Zhao
Keyword(s):  
Film Thickness ◽  
Strain Gage ◽  
Lubricant Film ◽  
Rolling Element Bearings ◽  
Main Program ◽  
Test Apparatus ◽  
Lubricant Film Thickness ◽  
Rolling Element ◽  
Lubricant Films ◽  
Flow Charts

A method for measuring the lubricant condition with strain gage in rolling element bearings and the instrument used are introduced. In order to illustrate the method and the instrument, the theory of measuring lubricant films in rolling element bearings using strain technique, test apparatus, microcomputer hardware as well as software, flow charts for the main program and subprograms, are first described in detail. In addition, the lubricant film thickness is measured for several different lubricants and results are compared with theoretical ones. It is demonstrated that using the method and the instrument introduced in this paper, one can measure the lubricant condition inside bearings very accurately.

Optimized Mapping of Pressure in Lubricated Point Contacts Based on Measured Film Thickness

2007 ◽  
Author(s):  
Radek Polisˇcˇuk ◽  
Michal Vaverka ◽  
Martin Vrbka ◽  
Ivan Krˇupka ◽  
Martin Hartl
Keyword(s):  
Film Thickness ◽  
Numerical Solution ◽  
Point Contact ◽  
Contact Fatigue ◽  
Lubricant Film ◽  
Rolling Contact ◽  
Experimental Film ◽  
Lubricated Contacts ◽  
Practical Performance ◽  
Traction Drives

The surface topography plays significant role in lifetime of highly loaded machine parts with lubricated contacts. Many elements like gears, rolling bearings, cams and traction drives operate in mixed lubrication conditions, where the lubricant film behavior closely implies the main practical performance parameters such as friction wear, contact fatigue and scuffing. For prediction of wear and especially contact fatigue, the values and distribution of the pressure in rolling contact are often required. The usual theoretical approach based on numerical solution of physical-mathematical models built around the Reynolds equation can be extremely time consuming, especially when lubricant films are very thin, and contact load and required resolution very high. This study presents a further refined approach to our previously published experimental method, based on on inverse elasticity theory and fast convolution transformation between the lubricant film thickness map and the pressure distribution within the point contact. The experimental film thickness maps of EHD lubricated contacts with smooth and dented surfaces were processed using colorimetric interferometry and validated using numerical solution, in order to calibrate numerical parameters and to find limits of the new approach.

scholarly journals An investigation into the oil transport and starvation of piston ring pack

2018 ◽  
Vol 233 (1) ◽  
pp. 112-124 ◽  
Author(s):  
SR Bewsher ◽  
M Mohammadpour ◽  
H Rahnejat ◽  
G Offner ◽  
O Knaus
Keyword(s):  
Film Thickness ◽  
Boundary Conditions ◽  
Piston Ring ◽  
Gasoline Engine ◽  
Reverse Flow ◽  
Lubricant Film ◽  
Total Power ◽  
Lubricant Film Thickness ◽  
Piston Ring Pack ◽  
Ring Pack

In order to accurately predict the lubricant film thickness and generated friction in any tribological contact, it is important to determine appropriate boundary conditions, taking into account the oil availability and extent of starvation. This paper presents a two-dimensional hydrodynamic model of a piston ring pack for prediction of lubricant film thickness, friction and total power loss. The model takes into account starvation caused by reverse flow at the conjunctional inlet wedge, and applied to a ring pack, comprising a compression and scraper ring. Inlet boundaries are calculated for an engine cycle of a four-cylinder, four-stroke gasoline engine operating at 1500 r/min with conditions pertaining to the New European Drive Cycle. The analysis shows the two main sources of starvation: first, due to a physical lack of inlet meniscus and second, due to reverse flow at the inlet wedge significantly affecting the prevailing conditions from the generally assumed idealised boundary conditions. Such an approach has not hitherto been reported in literature.

Instrumented Engine Bearings for Lubricant Film Thickness Measurement

MTZ worldwide ◽  
2021 ◽  
Vol 83 (1) ◽  
pp. 28-37
Author(s):  
Henry Brunskill ◽  
Andrew Hunter ◽  
Hosung Nam ◽  
Junsik Park
Keyword(s):  
Film Thickness ◽  
Thickness Measurement ◽  
Lubricant Film ◽  
Lubricant Film Thickness ◽  
Film Thickness Measurement
Sign in / Sign up

Export Citation Format

Share Document