The Role of the Dielectric Fluid in Electrical Discharge Machining

1968 ◽  
Author(s):  
Terry O. Hockenberry
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Dielectric Fluid

Ti-6Al-4V Surfaces in SiC Powder Mixed Electrical Discharge Machining

2013 ◽  
Vol 856 ◽  
pp. 226-230 ◽  
Author(s):  
Hamidullah Yaşar ◽  
Bülent Ekmekci
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Dielectric Liquid ◽  
Operational Parameters ◽  
Electrical Parameters ◽  
Machined Surface ◽  
Optical Scanning ◽  
Surface Topographies ◽  
Powder Suspension

The role of suspended particles on Ti-6Al-4V surface in Powder Mixed Electrical Discharge Machining (PMEDM) is studied using SiC powder mixing in water dielectric liquid. Surface modifications due to the additives in dielectric liquid are investigated by means of optical, scanning electron microscopy and energy dispersive spectroscopy. The attachment of added powders and surface topographies interrelated with powder suspension concentration, particle size and electrical parameters such as pulse on duration and current. The influence on discharge transitivity with respect to SiC additives is noticed with pock like features on the surface. The geometry and size of these features indicated a robust dependency with respect to operational parameters and indicated the role of secondary discharges during PMEDM. SiC particles severely transferred from di-electric liquid to machined surface at critical operational parameters and implied that the process could be also used as a surface alloying technique.

An extensive review on sustainable developments of dry and near-dry electrical discharge machining processes

2021 ◽  
pp. 1-37
Author(s):  
Sampath Boopathi
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Optimization Techniques ◽  
Machining Process ◽  
Working Fluid ◽  
Dielectric Fluid ◽  
Extensive Literature ◽  
Machining Processes ◽  
Research Activities ◽  
Dry Edm

Abstract Electrical discharge machining (EDM) is very essential unconventional electro-thermal machining process to machine the contour profile of hard materials in modern production industries. The liquid dielectric fluid has been replaced by the gas and minimum quantity of liquid mixed with gas (gas-mist) to encourage the green machining processes. The various gases and gas-mist have been used as the working fluid in dry and near-dry EDM respectively. The research-contextual, various dielectric fluids, sustainable and innovative developments, process parameters, machining characteristics, and optimization techniques applied in various dry and near-dry EDM have been illustrated through an extensive literature survey. Future research opportunities in both dry and near-dry EDM have been summarized to promote eco-friendly EDM research activities.

Surfactant and graphite powder–assisted electrical discharge machining of titanium alloy

2016 ◽  
Vol 231 (4) ◽  
pp. 641-657 ◽  
Author(s):  
Murahari Kolli ◽  
Adepu Kumar
Keyword(s):  
Surface Roughness ◽  
Titanium Alloy ◽  
Electrical Discharge ◽  
Material Removal ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
Graphite Powder ◽  
Recast Layer ◽  
Dielectric Fluid ◽  
Recast Layer Thickness

Surfactant and graphite powder–assisted electrical discharge machining was proposed and experiments were performed on titanium alloy in this investigation. Analysis was carried out to observe changes in dielectric fluid behaviour, material removal rate, surface roughness, recast layer thickness, surface topography and energy-dispersive X-ray spectroscopy. It was found out that the addition of surfactant to dielectric fluid (electrical discharge machining oil + graphite powder) improved the material removal rate and surface roughness. It was noticed to have reduced the recast layer thickness and agglomeration of graphite and sediment particles. Biface material migrations between the electrode and the workpiece surface were identified, and migration behaviour was powerfully inhibited by the mixing of surfactant. Surfactant added into dielectric fluid played an important role in the discharge gap, which increased the conductivity, and suspended debris particles in dielectric fluid reduced the abnormal discharge conditions of the machine and improved the overall machining efficiency.

scholarly journals Parametric optimization of wire cut electrical discharge machining

2014 ◽  
Vol 3 (2) ◽  
pp. 212
Author(s):  
M. Durairaj ◽  
A.K.S. Ansari ◽  
M. H. Gauthamkumar
Keyword(s):  
Surface Roughness ◽  
Orthogonal Array ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Fluid Pressure ◽  
Performance Criteria ◽  
Dielectric Fluid ◽  
Machining Parameters ◽  
Pulse On Time ◽  
Pulse Off Time

Wire Electrical Discharge Machining is a manufacturing process whereby a desired shape is obtained using electrical discharges (or) by repetitive spark cycle. Precision and intricate machining are the strengths. Machining parameters tables provided by the machine tool manufacturers often do not meet the operator requirements. Selection of optimum machining and machining parameters combinations is needed for obtaining higher cutting efficiency and accuracy. In this present study, machining is done using Wire-Cut EDM and optimization of surface roughness is done using Taguchis design of experiments. Experimentation was planned as per Taguchis L16 orthogonal array. Each experiment has been performed under different cutting conditions of gap voltage, pulse ON time, and pulse OFF time and Wire feed. Dielectric fluid pressure, wire speed, wire tension, resistance and cutting length are taken as fixed parameters. Inconel 800 was selected as a work material to conduct the experiments. From experimental results, the surface roughness was determined for each machining performance criteria. Signal to noise ratio was applied to measure the performance characteristics deviating from the actual value. Finally, experimental confirmation was carried out to identify the effectiveness of this proposed method. Keywords: Optimization; Taguchis L-16 Orthogonal Array; Surface Roughness; S/N Ratio.

Control Strategy for Electrical Discharge Machining (EDM) Pulse Power Generator

2014 ◽  
Vol 554 ◽  
pp. 643-647 ◽  
Author(s):  
Minhat Ade Erawan ◽  
Khamis Nor Hisham ◽  
Azli Yahya ◽  
Andromeda Trias ◽  
Juli Purwanto Nugroho Kartiko ◽  
...  
Keyword(s):  
Power Supply ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Pulse Power ◽  
Dielectric Fluid ◽  
Hard Material ◽  
Machining Processes ◽  
Power Generator ◽  
Pulse Power Generator ◽  
Control Feedback

Electrical Discharge Machining (EDM) is a advanced machine that can control electrical spark to erode metal on the workpiece. In manufacturing, EDM is used on hard material parts that are extremely difficult to machine by conventional machining processes. EDM system consists of a shaped tool and the work piece, which are connected to a power supply and placed in a dielectric fluid. EDM pulse power generator applies voltage and current pulses between the electrode and workpiece to generate sparks through the gap. To obtain the optimum metarial removal rate (MRR), a good alternative is to improve the gap voltage and gap current. A proposed solution to these issue is combining ultracapacitor bank to the main power supply circuit for EDM machines. The control feedback of this research is designed to make sure that the current on DC bus is maintained at current setting during the machining processes.

Influence of Pulse-on-Time on the Performance of Wire Electrical Discharge Machining of Ti-6Al-4V Using Zinc Coated Brass Wire

2014 ◽  
Vol 592-594 ◽  
pp. 416-420 ◽  
Author(s):  
Singaravelu D. Lenin ◽  
A. Uthirapathi ◽  
Ramana Reddy P.S. Venkata ◽  
Muthukannan Durai Selvam
Keyword(s):  
Surface Roughness ◽  
Electrical Discharge ◽  
Metal Removal ◽  
Electrical Discharge Machining ◽  
Kerf Width ◽  
Dielectric Fluid ◽  
Wire Electrical Discharge Machining ◽  
Pulse On Time ◽  
Pulse Off Time ◽  
Brass Wire

The present paper describes the influence of pulse-on-time on performance features such as Metal Removal Rate (MRR), Kerf width, Surface Roughness (SR) on cutting Titanium alloy (Ti-6Al-4V) in wire electrical discharge machining (WEDM) using zinc coated brass wire. The deionised water is used as dielectric fluid. The process parameters such as wire tension, wire speed, flushing pressure, discharge current, sparking voltage and pulse off time have kept constant at appropriate values throughout the experiment and the pulse on time is varied at nine different intervals. It was found that pulse-on-time is the most significant factor which greatly influences MRR, kerf width, and SR. It was also observed that taper at the end of cutting zone which is unavoidable occurrence for the machined part. This is due to the erosion of wire material. The surface roughness increases with increase in pulse on time also with higher rate of MRR.

Sign in / Sign up

Export Citation Format

Share Document