Development and Flight Testing a Simplified Fixed Shaft Turboprop Flight Control System

1966 ◽  
Author(s):  
Vern Johnson ◽  
J. R. Baker ◽  
J. W. Massey
Keyword(s):  
Control System ◽  
Flight Control ◽  
Flight Control System ◽  
Flight Testing

Divergence Speed Prediction for Practical Slung Load Shapes

2015 ◽  
Author(s):  
Brandon Liberi ◽  
Chau Ton ◽  
Narayanan Komerath
Keyword(s):  
Control System ◽  
Robust Control ◽  
Wind Tunnel ◽  
Flight Control ◽  
Flight Control System ◽  
Wind Tunnel Experiments ◽  
Flight Testing ◽  
Flight Vehicles ◽  
Analytical Functions ◽  
Speed Prediction

Given the innumerable combinations of flight vehicles, loads and flight conditions, alternatives are sought to flight testing, to certify the safe flight speed with slung loads. With well-resolved airload maps now feasible for arbitrary shapes as analytical functions, dynamic simulation predicts divergence speeds, regardless of the symmetry of the object. Likely modes of amplification are found using wind tunnel experiments with free-swinging objects. A robust control formulation enables safe flight close to divergence speed where the flight control system can prevent disturbance amplification.

Design of the wind tunnel based virtual flight testing evaluation method for flight control systems

2016 ◽  
Vol 232 (1) ◽  
pp. 17-29
Author(s):  
Min Huang ◽  
Zhong-wei Wang ◽  
Zhen-yun Guo ◽  
Yao-bin Niu
Keyword(s):  
Control System ◽  
Wind Tunnel ◽  
Control Systems ◽  
Flight Control ◽  
Evaluation Method ◽  
Simulation Models ◽  
Hardware In The Loop ◽  
Flight Control System ◽  
Flight Testing ◽  
Simulation Evaluation

In order to provide a method for evaluating flight control systems with the wind tunnel based virtual flight testing and provide a guide for building virtual flight testing systems, the virtual flight testing evaluation method was researched. The virtual flight testing evaluation method consisted of three parts: virtual flight testing method, virtual flight testing data processing method, and flight control system performance determination method, which were respectively designed for a pitching control system. Then, the hardware-in-the-loop simulation evaluation method was presented, and comparisons between the virtual flight testing and hardware-in-the-loop simulation evaluation method were conducted to highlight the characteristics of virtual flight testing evaluation method. Finally, virtual flight testing simulation models of a sample air vehicle were built and virtual flight testing were simulated to demonstrate the virtual flight testing evaluation method, which is helpful for the understanding of the virtual flight testing evaluation method with more sensibility. The evaluation results show that the virtual flight testing evaluation method designed can be used for flight control system evaluation.

Flight Simulator as a Tool for Flight Control System Synthesis and Handling Qualities Research

2009 ◽  
Vol 147-149 ◽  
pp. 231-236 ◽  
Author(s):  
Tomasz Rogalski ◽  
Andrzej Tomczyk ◽  
Grzegorz Kopecki
Keyword(s):  
Control System ◽  
Control Systems ◽  
Flight Control ◽  
Flight Simulator ◽  
Flight Control System ◽  
Aircraft Control ◽  
Flight Testing ◽  
Flight Tests ◽  
Control Laws ◽  
Handling Qualities

At the Department of Avionics and Control Systems problems of aeronautical control systems have been dealt with for years. Several different kinds of aeronautical control systems have been designed, prototyped and tested. These control systems are intended for general aviation aircraft and unmanned aircraft. During all research projects computer simulations and laboratory tests were made. However, since in some cases such tests were insufficient, in-flight tests were conducted leading to a series of reliable results. The in-flight tests were made with the use of M-20 Mewa aircraft (autopilot for a GA aircraft) and PZL-110 Koliber aircraft (control system for UAV and indirect flight control system for a GA aircraft). Nevertheless, in-flight testing is very expensive and problematic. To avoid some problems appearing during in-flight tests and their preparation, a simulator – which is normally used for professional pilot training – can be used. The Aviation Training Center of the Rzeszów University of Technology possesses the ALSIM AL-200 MCC flight simulator. We have started preparing this simulator for the research. It is possible to control the simulated aircraft with the use of an external control system. The solution proposed enables testing the aircraft control algorithms, indirect control laws (e.g. control laws modifying handling qualities), as well as testing and assessment of the students’ pilotage skills. Moreover, the solution makes it possible to conduct tests connected with aircraft control, crew management, crew cooperation and flight safety. The simulator allows us to test dangerous situations, which – because of safety reasons – is impossible during in-flight testing. This paper presents modifications to the simulator’s hardware and additional software, which enable the described research.

Sign in / Sign up

Export Citation Format

Share Document