A Siamesed Turbine System for Off-the-Road Heavy Duty Vehicles

1964 ◽  
Author(s):  
John M. Clark ◽  
Ross F. Meriwether
2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Jing Zhao ◽  
Pak Kin Wong ◽  
Zhengchao Xie ◽  
Xinbo Ma ◽  
Caiyang Wei

Semiactive suspension (SAS) system has been widely used for its outstanding performance in offering competent ride quality, road holding, and handling capacity. However, the road friendliness is also one of the crucial factors that should be attached in the design of the SAS system for heavy-duty vehicles. In this study, a fuzzy controlled hybrid-acceleration driven damper (ADD) and ground hook- (GH-) control strategy is proposed for SAS system of heavy-duty vehicles. Firstly, a quarter-vehicle model with SAS system is constructed. Then, aiming to improve the ride quality and road friendliness, a hybrid-ADD and GH-control strategy is proposed under the coordination of the fuzzy controller. Numerical results show that the ride quality and road friendliness of the SAS system with the proposed control strategy outperform those with traditional hybrid-sky hook and ground hook-control strategy. It is also verified that the proposed strategy is superior to the sole ADD approach and sole ground hook approach in improving the vehicle overall performance.


2013 ◽  
Vol 2013 ◽  
pp. 1-12 ◽  
Author(s):  
Zhengchao Xie ◽  
Pak Kin Wong ◽  
Jing Zhao ◽  
Tao Xu ◽  
Ka In Wong ◽  
...  

Semi-active air suspension is increasingly used on heavy-duty vehicles due to its capabilities of consuming less power and low cost and providing better ride quality. In this study, a new low cost but effective approach, fuzzy-wheelbase preview controller with wavelet denoising filter (FPW), is developed for semi-active air suspension system. A semi-active suspension system with a rolling lobe air spring is firstly modeled and a novel front axle vertical acceleration-based road prediction model is constructed. By adopting a sensor on the front axle, the road prediction model can predict more reliable road information for the rear wheel. After filtering useless signal noise, the proposed FPW can generate a noise-insensitive control damping force. Simulation results show that the ride quality, the road holding, the handling capability, the road friendliness, and the comprehensive performance of the semi-active air suspension with FPW outperform those with the traditional active suspension with PID-wheelbase preview controller (APP). It can also be seen that, with the addition of the wavelet filter, the impact of sensor noise on the suspension performance can be minimized.


Author(s):  
Hongpeng Zheng ◽  
Yulong Lei ◽  
Pengxiang Song

With the development of the road industry, heavy-duty vehicles now require additional braking power to fulfill their braking requirements. Auxiliary braking systems, which include a hydraulic retarder and an engine brake, can provide additional braking force in nonemergency braking conditions. A water medium retarder is a new type of hydraulic retarder that can convert the kinetic energy of a vehicle into the thermal energy of coolant. This study introduces a novel auxiliary braking system involving a water medium retarder and an engine brake for heavy-duty vehicles. The specific forces of heavy-duty vehicles and the auxiliary braking system are established. The control logic of the novel auxiliary braking system is assigned, and a main controller is designed to dynamically manage the entire braking process. The main controller includes controllers A and B, which handles the engine brake and water medium retarder, respectively. The heavy-duty vehicles dynamic system model is created using MATLAB/Simulink. Upon performance testing, simulation results show that the designed main controller can effectively and rapidly manage the auxiliary braking system, thus satisfying the braking requirements in any nonemergency braking condition. Even when the slope of a road changes, the main controller can extract dynamical forces as well as acceleration parameters and fulfill the braking requirements of vehicles.


Author(s):  
Mehmet Emin Mumcuoglu ◽  
Gokhan Alcan ◽  
Mustafa Unel ◽  
Onur Cicek ◽  
Mehmet Mutluergil ◽  
...  

2020 ◽  
Vol 53 (2) ◽  
pp. 13850-13854
Author(s):  
P. Polverino ◽  
I. Arsie ◽  
C. Pianese

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 1036
Author(s):  
Yunxia Li ◽  
Lei Li

A countershaft brake is used as a transmission brake (TB) to realize synchronous shifting by reducing the automated mechanical transmission (AMT) input shaft’s speed rapidly. This process is performed to reduce shifting time and improve shifting quality for heavy-duty vehicles equipped with AMT without synchronizer. To improve controlled synchronous shifting, the AMT input shaft’s equivalent resistance torque and the TB’s characteristic parameters are studied. An AMT dynamic model under neutral gear position is analyzed during the synchronous control interval. A dynamic model of the countershaft brake is discussed, and its control flow is given. The parameter identification method of the AMT input shaft’s equivalent resistance torque is given on the basis of the least squares algorithm. The parameter identification of the TB’s characteristic parameters is proposed on the basis of the recursive least squares method (RLSM). Experimental results show that the recursive estimations of the TB’s characteristic parameters under different duty cycles of the TB solenoid valve, including brake torque estimation, estimation accuracy, and braking intensity estimation, can be effectively estimated. The research provides some reliable evidence to further study the synchronous shifting control schedule for heavy-duty vehicles with AMT.


2021 ◽  
Vol 191 ◽  
pp. 116891
Author(s):  
Stijn Broekaert ◽  
Theodoros Grigoratos ◽  
Dimitrios Savvidis ◽  
Georgios Fontaras

2009 ◽  
Vol 43 (10) ◽  
pp. 3905-3912 ◽  
Author(s):  
Subhasis Biswas ◽  
Vishal Verma ◽  
James J. Schauer ◽  
Flemming R. Cassee ◽  
Arthur K. Cho ◽  
...  

1993 ◽  
Author(s):  
Nils-Olof Nylund ◽  
Matti Kytö

Sign in / Sign up

Export Citation Format

Share Document