an evaluation of AFTERCOOLING in Turbocharged Diesel Engine Performance

1959 ◽  
Author(s):  
J. E. Mitchell
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Turbocharged Diesel Engine

Performance and Exhaust Emissions of a Diesel Engine Running With DME

2001 ◽  
Author(s):  
F. Maroteaux ◽  
G. Descombes ◽  
F. Sauton
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Injection Rate ◽  
Combustion Reaction ◽  
Emissions Reduction ◽  
Turbocharged Diesel Engine ◽  
Turbocharging System ◽  
Performance And Emissions ◽  
Thermodynamic Conditions

Abstract This research investigates engine performance and the potential of reducing exhaust emissions by using Dimethyl Ether (DME) which is an alternative fuel for diesel engines. The objective of this study it to evaluate (on the bed test) the performance and emissions reduction potential of an engine running with DME. A 4 cylinder passenger car HSDI Common Rail turbocharged diesel engine without specific modifications was used. The results obtained on this engine running with DME using diesel fuel as reference are encouraging. In the next steps of this study the injection rate will be adapted to DME operation and to the geometric and thermodynamic conditions of the combustion reaction. A study of the combustion reaction is also necessary in order to optimize the turbocharging system to exclusive DME operation.

Assessment of Charge-Air Cooler Health in Diesel Engines Using Nonlinear Time Series Analysis of Intake Manifold Temperature

2009 ◽  
Vol 131 (4) ◽  
Author(s):  
Alok A. Joshi ◽  
Scott James ◽  
Peter Meckl ◽  
Galen King ◽  
Kristofer Jennings
Keyword(s):  
Diesel Engine ◽  
Nearest Neighbor ◽  
Engine Performance ◽  
Local Linear Regression ◽  
Intake Manifold ◽  
Optimal Time ◽  
Boost Pressure ◽  
General Applicability ◽  
Turbocharged Diesel Engine ◽  
Air Cooler

Degradation in the cooling effectiveness of a charge-air cooler (CAC) in a medium-duty turbocharged diesel engine has significant impact on engine performance. This degradation lowers the boost pressure and raises the intake manifold temperature. As a result, the engine provides lower horsepower and higher hydrocarbon levels than the rated values. The objective of this research is to monitor the health of the charge-air cooler by analyzing the intake manifold temperature signal. Experiments were performed on a Cummins ISB series turbocharged diesel engine, a 6-cylinder inline configuration with a 5.9 l displacement volume. Air flowing over the cooler was blocked by varying amounts, while various engine temperatures and pressures were monitored at different torque-speed conditions. Similarly, data were acquired without the introduction of any fault in the engine. For the construction of the manifold temperature trajectory vector, average mutual information estimates and a global false nearest neighbor analysis were used to find the optimal time parameter and embedding dimensions, respectively. The prediction of the healthy temperature vector was done by local linear regression using torque, speed, and their interaction as exogenous variables. Analysis of residuals generated by comparing the predicted healthy temperature vector and the observed temperature vector was successful in detecting the degradation of the charge-air cooler. This degradation was quantified by using box plots and probability density functions of residuals generated by comparing intake manifold temperature of healthy and faulty charge-air coolers. The general applicability of the model was demonstrated by successfully diagnosing a fault in the exhaust gas recirculation cooler of a different engine.

A Theoretical Study of a Variable Compression Ratio Turbocharged Diesel Engine

1992 ◽  
Vol 206 (4) ◽  
pp. 227-238 ◽  
Author(s):  
T J Rychter ◽  
A Teodorczyk ◽  
C R Stone ◽  
H J Leonard ◽  
N Ladommatos ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Compression Ratio ◽  
Engine Performance ◽  
Expansion Ratio ◽  
Combustion Noise ◽  
Connecting Rod ◽  
Turbocharged Diesel Engine ◽  
Variable Compression Ratio ◽  
Engine Simulation ◽  
Variable Compression

A variable compression ratio concept that can give a different expansion ratio to the compression ratio has been evaluated by means of a simulation of a turbocharged diesel engine. The compression ratio is controlled by varying the ratio of the connecting rod length to the crank throw, hence the name variable crank radius/connecting rod length engine (VR/LE). The VR/LE mechanism kinematics have been defined and described, and the compression ratio and expansion ratio have been presented as a function of the eccentric phase angle (αo). A zero-dimensional engine simulation that has been the subject of comprehensive validation has been used as the basis of the VR/LE study. The effect of the compression ratio on the engine performance at fixed loads is presented. The principal benefits are a reduction in fuel consumption at part load of about 2 per cent and a reduction in ignition delay that leads to an estimated 6 dB reduction in combustion noise. The study has been conducted within the assumption of a maximum cylinder pressure of 160 bar.

Effects of the Re-Entrant Bowl Geometry on a DI Turbocharged Diesel Engine Performance and Emissions—A CFD Approach

2010 ◽  
Vol 132 (12) ◽  
Author(s):  
S. Pasupathy Venkateswaran ◽  
G. Nagarajan
Keyword(s):  
Diesel Engine ◽  
Direct Injection ◽  
Combustion Process ◽  
Engine Performance ◽  
Maximum Diameter ◽  
Diffusion Combustion ◽  
Turbocharged Diesel Engine ◽  
Performance And Emissions ◽  
Di Diesel Engine ◽  
Fuel Mixing

The purpose of this study is to investigate the influence of re-entrant bowl geometry on both engine performance and combustion efficiency in a direct injection (DI), turbocharged diesel engine for heavy-duty applications. The piston bowl design is one of the most important factors that affect the air–fuel mixing and the subsequent combustion and pollutant formation processes in a DI diesel engine. The bowl geometry and dimensions, such as the pip region, bowl lip area, and toroidal radius, are all known to have an effect on the in-cylinder mixing and combustion processes. Based on the idea of enhancing diffusion combustion at the later stage of the combustion period, three different bowl geometries, namely, bowl 1 (baseline), bowl 2, and bowl 3 were selected and investigated. All the other relevant parameters, namely, compression ratio, maximum diameter of the bowl, squish clearance and injection rate were kept constant. A commercial CFD code STAR-CD was used to model the in-cylinder flows and combustion process, and experimental results of the baseline bowl were used to validate the numerical model. The simulation results show that, bowl 3 enhance the turbulence and hence results in better air-fuel mixing among all three bowls in a DI diesel engine. As a result, the indicated specific fuel consumption and soot emission reduced although the NOx emission is increased owing to better mixing and a faster combustion process. Globally, since the reduction in soot is larger (−46% as regards baseline) than the increase in NOx (+15% as regards baseline), it can be concluded that bowl 3 is the best trade-off between performance and emissions.

Analysis of Engine Performance Parameters of Electrically Assisted Turbocharged Diesel Engine

2015 ◽  
Vol 799-800 ◽  
pp. 861-864
Author(s):  
Tayfun Özgür ◽  
Kadir Aydın
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Fuel Economy ◽  
Engine Performance ◽  
Performance Parameters ◽  
Turbocharged Diesel Engine ◽  
Charging System ◽  
Electrically Assisted ◽  
Turbocharging System ◽  
Exhaust Energy

Charging system is used to increase the charge density. Supercharging system suffers from fuel consumption penalty because of compressor powered by engine output. Turbocharging system uses wasted exhaust energy that means compressor powered by exhaust turbine but has a turbo lag problem. The electrically assisted turbocharger which can eliminate turbo lag problem and fuel consumption penalty is the topic of this paper. The purpose of this paper is to analyze the effect of electrically assisted turbocharger on diesel engine performance parameters. The AVL Boost software program was used to simulate the electrically assisted turbocharged diesel engine. Simulations results showed that electrically assisted turbocharger increases low end torque and improves fuel economy.

Sign in / Sign up

Export Citation Format

Share Document