WHAT HAPPENS TO AUTOMOTIVE MATERIALS ON THE TEST TRACK OR THE PROVING GROUND - KING SIZED MATERIAL TESTING MACHINE

1957 ◽  
Author(s):  
R. W. Gaines ◽  
W. A. Mcconnell
Keyword(s):  
Testing Machine ◽  
Material Testing ◽  
Test Track ◽  
Material Testing Machine

A New Stress Sensor Based on Amorphous Alloy for Dynamic Weigh Rail

2011 ◽  
Vol 204-210 ◽  
pp. 608-611
Author(s):  
Yan Ping Shi
Keyword(s):  
Amorphous Alloy ◽  
Testing Machine ◽  
Material Testing ◽  
Static Characteristic ◽  
Stress Sensor ◽  
Actual Experiment ◽  
High Measurement ◽  
Material Testing Machine ◽  
Output Equation

In order to solve some problem of stress sensor in dynamic weigh rail, a new kind of inductive stress sensor based on magnetostriction effect of amorphous alloy was developed. First, the principle of sensor, and inferred its output equation were discussed. Second, the static characteristic experiment and the actual experiment on the material testing machine and the mine haulage rail were separately made. The results of the test have showed that this stress sensor has some characteristics as high measurement sensitiveness and accuracy. Also being simple, convenient and solid to install and use, so it is feasible to apply the sensor for the dynamic weigh rail.

Development and Properties of a New Correction Instrument of Pectus Excavatum

2009 ◽  
Vol 610-613 ◽  
pp. 1327-1330
Author(s):  
Yu Ling Hu ◽  
Xue Bao Yu ◽  
Wei Dong Miao ◽  
Gang Liu
Keyword(s):  
Mechanical Properties ◽  
Minimally Invasive ◽  
Pectus Excavatum ◽  
Testing Machine ◽  
Pure Titanium ◽  
Material Testing ◽  
Invasive Technique ◽  
Nuss Procedure ◽  
Universal Material Testing Machine ◽  
Material Testing Machine

A new correction instrument of pectus excavatum is introduced which is designed for a minimally invasive technique (Nuss procedure). The instrument was made of pure titanium plates, and finished by machining, surface treatment and so on. The instrument was made up of correcting bar and fixing bar. The mechanical properties of the instrument was measured with electron universal material testing machine, the safety and validity was verified by clinical doctors after being implanted into the patient. Results showed that the mechanical properties of the instrument keep constantly after implantation for two years. It is lighter than the like product, and can lighten the patent’s and the doctor’s operation bearing. It had been applied in national hospitals, and results showed that it was of better biocompatibility, and few complications were found. Clinical treatment effects were satisfactory.

scholarly journals Development of a material testing machine with multi-dimensional loading capability

2016 ◽  
Vol 10 (2) ◽  
pp. JAMDSM0017-JAMDSM0017 ◽  
Author(s):  
Jiangzhen GUO ◽  
Dan WANG ◽  
Rui FAN ◽  
Wuyi CHEN ◽  
Guohua ZHAO
Keyword(s):  
Testing Machine ◽  
Material Testing ◽  
Material Testing Machine

Crystal Morphology and Thermal Properties of PTT/POE/OMMT Nanocomposites

2011 ◽  
Vol 181-182 ◽  
pp. 39-42
Author(s):  
Ming Tao Run ◽  
Qing Chang Zhang ◽  
Wen Zhou ◽  
Yu Zhong
Keyword(s):  
Crystal Morphology ◽  
Testing Machine ◽  
Crystallization Rate ◽  
Material Testing ◽  
Melt Crystallization ◽  
Nucleation Agent ◽  
Scanning Calorimetry ◽  
Lower Melting Point ◽  
Universal Material Testing Machine ◽  
Material Testing Machine

The crystal morphology, melt-crystallization and mechanical properties of poly (trimethylene terephthalate)/maleinized poly (octene-ethylene)/organo-montmorillonite nanocomposites were investigated by using polarized optical microscopy (POM), differential scanning calorimetry (DSC) and universal material testing machine, respectively. The results suggest that the nanocomposites form smaller or imperfect microcrystallites with lower melting point due to the influence of OMMT components and the nanocomposites have increased crystallization rate because OMMT is an effective nucleation agent. However, the crystallinity decreases because of the thickening effect of OMMT in the composites. The nanocomposite with 2%OMMT has the largest tensile and impact strength.

A Study on Rate Sensitivity of Impedance in TRIP Steel during Deformation at Various Strain Rate under Two Kinds of Deformation Mode

2014 ◽  
Vol 566 ◽  
pp. 140-145
Author(s):  
Daiki Inoshita ◽  
Takeshi Iwamoto
Keyword(s):  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Trip Steel ◽  
Testing Machine ◽  
Rate Sensitivity ◽  
Deformation Mode ◽  
Tensile Tests ◽  
Material Testing ◽  
Trip Steels ◽  
Material Testing Machine

TRIP steel possesses excellent mechanical properties dominated by strain-induced martensitic transformation (SIMT). For automotive industries, if TRIP steel can be applied to shock absorption members, it can be considered that the weight of automobile can be reduced. However, the strain rate sensitivity of TRIP steels has not been fully understood because the strain rate sensitivity and the deformation mode dependency of SIMT are still unclear. Therefore, it is important to reveal these sensitivity and dependency for confirming a reliability of TRIP steel. Therefore, in this study, it is attempted to estimate the amount of produced martensite in TRIP steel by measuring the inductance of TRIP steel. The specimen made of TRIP steel is used as a core of a prototype coil manufactured in this study. Then, the compressive and tensile tests are conducted by using a material testing machine and a drop weight testing machine using the specimen inside the coil. The inductance of the coil with the deformed specimen are measured continuously during the tests.

scholarly journals ANALISIS KEKUATAN TARIK KAMPUH V DAN KAMPUH I SAMBUNGAN LAS BAJA KARBON RENDAH YANG TERDAPAT PADA BESI IWF 400

2019 ◽  
Author(s):  
Irzal ◽  
syahrul
Keyword(s):  
Testing Machine ◽  
Material Testing ◽  
Test Machine ◽  
Type I ◽  
Average Value ◽  
Joint Connection ◽  
Connection Type ◽  
Universal Material Testing Machine ◽  
Material Testing Machine ◽  
Welding Position

by using connection type I. To get a good welding result is determined several factors, including the properties of material welding, connection type, welding position, and electrode used. In a welding project, there is still a welder that only uses I in the weld IWF 400 connecting iron while the thickness of the material 13 mm. This study aims to determine the effect of the use of campuh against the strength of weld joint connection using LB 52U 2.6 mm Electrode and RD 7018 3.2 mm electrode with AC Flow. In this study using experimental method begins with making specimens. With the collection of 7 specimens consisting of 3 specimens with welding treatment using Camp V, 3 specimens with welding treatment using Camp I and 1 IWF 400 specimens without welding treatment. From the results of research conducted on specimens by making and testing specimens with a tensile test machine Hydraullic Universal Material Testing Machine then obtained on the specimen without welding average value of Maximum (max) 41,28 kgf/mm². In welded specimens with a connection of the V values the average value of the Maximum (max) 39,82 kgf/mm². On a welded specimen with a maximum I knot connection (max) 38,32 kgf/mm².The results of this study indicate the results of iron welding IWF 400 using camp V greater value voltage 39.82 kgf / mm². From the maximum voltage value obtained from this study it is recommended that iron welding IWF 400 uses V.

scholarly journals Influence of Vanadium Microalloying on Microstructure and Property of Laser-Cladded Martensitic Stainless Steel Coating

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 826
Author(s):  
Wenfeng Hu ◽  
Hongmei Zhu ◽  
Jipeng Hu ◽  
Baichun Li ◽  
Changjun Qiu
Keyword(s):  
Tensile Strength ◽  
Stainless Steel ◽  
Martensitic Stainless Steel ◽  
Testing Machine ◽  
Material Testing ◽  
Number Density ◽  
Steel Coating ◽  
Universal Material Testing Machine ◽  
Property Changes ◽  
Material Testing Machine

Martensitic stainless steel (MSS) coatings with different vanadium (V) contents (0–1.0 wt%) by microalloying have been successfully fabricated utilizing a unique laser cladding technique. The microstructure and properties of the resulting MSS coatings, with and without element V addition, have been carefully investigated by various advanced techniques, including XRD, SEM, TEM, microhardness tester, universal material testing machine, and electrochemical workstation. It was found that the V-free coating was mainly composed of martensite (M) and ferrite (F), trace M23C6 and M2N, while the V-bearing coatings consisted of M, F, M23C6, and VN nano-precipitates, and their number density increased with the increase of V content. The V microalloying can produce a significant impact on the mechanical properties of the resulting MSS laser-cladded specimens. As the V content increased, the elongation of the specimen increased, while the tensile strength and microhardness increased firstly and then decreased. Specifically, the striking comprehensive performance can be optimized by microalloying 0.5 wt% V in the MSS coating, with microhardness, tensile strength, yield strength, and elongation of 500.1 HV, 1756 MPa, 1375 MPa, and 11.9%, respectively. However, the corrosion resistance of the specimens decreased successively with increasing V content. The microstructure mechanisms accounting for the property changes have been discussed in detail.

Sign in / Sign up

Export Citation Format

Share Document