LONGITUDINAL CONTROL SYSTEM FOR HIGH-SPEED AIRCRAFT

1948 ◽  
Author(s):  
Harold O. Wendt
Keyword(s):  
Control System ◽  
High Speed ◽  
Longitudinal Control

Helicopter load alleviation using active control

2008 ◽  
Vol 112 (1137) ◽  
pp. 663-672
Author(s):  
M. Voskuijl ◽  
D. J. Walker ◽  
B. J. Manimala
Keyword(s):  
Control System ◽  
Flight Control ◽  
High Speed ◽  
Flight Control System ◽  
Order Model ◽  
Longitudinal Control ◽  
Handling Qualities ◽  
Control Techniques ◽  
Maneuvering Flight

Abstract This paper discusses how structural load objectives can be included in a rotorcraft flight control system design in an efficient and straightforward way using multivariable control techniques. Several research studies have indicated that pitch link loads for various rotorcraft types can reach high or even unacceptable values, both in steady state and maneuvering flight. This is especially the case for high-speed aggressive maneouvers. Pitch link loads at high-speed flight are therefore taken as a case study. A novel longitudinal control system is presented, designed to reduce helicopter pitch-link loads during high-speed longitudinal manoeuvres whilst providing a pitch attitude command attitude hold response type. The design is based on a high-order model of a helicopter representative of the UH-60 Black Hawk. New metrics are presented for the analysis of structural loads that can be used in combination with ADS-33 handling qualities requirements.

Control System for Suppressing Tracking Error Offset and Multiharmonic Disturbance in High-Speed Optical Disk Systems

2012 ◽  
Vol 132 (3) ◽  
pp. 347-356 ◽  
Author(s):  
Yuta Nabata ◽  
Tatsuya Nakazaki ◽  
Tokoku Ogata ◽  
Kiyoshi Ohishi ◽  
Toshimasa Miyazaki ◽  
...  
Keyword(s):  
Control System ◽  
High Speed ◽  
Tracking Error ◽  
Optical Disk

DESIGN OF FLY-BY-WIRE CONTROL SYSTEM ALGORITHMS FOR ADVANCED HIGH-SPEED HELICOPTER

2015 ◽  
Vol 46 (3) ◽  
pp. 259-287
Author(s):  
Viktor Andreevich Anikin ◽  
Oleg Vladimirovich Animitsa ◽  
Vladimir Mikhailovich Kuvshinov ◽  
Veniamin Aleksandrovich Leontiev
Keyword(s):  
Control System ◽  
High Speed

Direct Current Deadbeat Predictive Controller for BLDC Motor Using Single DC-Link Current Sensor

2020 ◽  
Vol 38 (8A) ◽  
pp. 1187-1199
Author(s):  
Qaed M. Ali ◽  
Mohammed M. Ezzalden
Keyword(s):  
Control System ◽  
High Speed ◽  
Fast Response ◽  
Bldc Motor ◽  
Current Controller ◽  
Three Phase ◽  
Predictive Controller ◽  
Two Phases ◽  
Dc Current ◽  
Three Phase Inverter

BLDC motors are characterized by electronic commutation, which is performed by using an electric three-phase inverter. The direct control system of the BLDC motor consists of double loops; including the inner-loop for current regulating and outer-loop for speed control. The operation of the current controller requires feedback of motor currents; the conventional current controller uses two current sensors on the ac side of the inverter to measure the currents of two phases, while the third current would be accordingly calculated. These two sensors should have the same characteristics, to achieve balanced current measurements. It should be noted that the sensitivity of these sensors changes with time. In the case of one sensor fails, both of them must be replaced. To overcome this problem, it is preferable to use one sensor instead of two. The proposed control system is based on a deadbeat predictive controller, which is used to regulate the DC current of the BLDC motor. Such a controller can be considered as digital controller mode, which has fast response, high precision and can be easily implemented with microprocessor. The proposed control system has been simulated using Matlab software, and the system is tested at a different operating condition such as low speed and high speed.

Ultrasonic sensor system for the uses in intelligent motion control system of a mobile robots group

2010 ◽  
Vol 7 ◽  
pp. 109-117
Author(s):  
O.V. Darintsev ◽  
A.B. Migranov ◽  
B.S. Yudintsev
Keyword(s):  
Control System ◽  
Mobile Robot ◽  
Mobile Robots ◽  
Motion Control ◽  
High Speed ◽  
Ultrasonic Sensor ◽  
Sensor System ◽  
Motion Control System ◽  
Speed Sensor ◽  
Working Space

The article deals with the development of a high-speed sensor system for a mobile robot, used in conjunction with an intelligent method of planning trajectories in conditions of high dynamism of the working space.

Developing and Research on Motion Controller Based on CPLD and MCU

2012 ◽  
Vol 490-495 ◽  
pp. 456-459
Author(s):  
Jun Han ◽  
Rui Li Chang
Keyword(s):  
Control System ◽  
High Speed ◽  
Servo Control ◽  
Numerical Control ◽  
Control Technology ◽  
Numerical Control System ◽  
Motion Controller ◽  
Research Focus ◽  
Open Cnc ◽  
Computer Numerical Control System

Open Computer Numerical Control system (Open CNC) based on PC and the Windows operating system has been a major developing direction and a research focus of the current numerical control technology. At present, there have been all kinds of the Open CNC systems with high-speed and precision servo control boards, but they are too expensive. Therefore, developing an economical and practical motion controller is great significant for middle and small numerical control system

Application of the Real-Time EtherCAT Technology in Wind Power Control System

2012 ◽  
Vol 580 ◽  
pp. 155-159
Author(s):  
Xiang Ming Wang ◽  
Jin Chao Wang ◽  
Dong Hua Sun
Keyword(s):  
Control System ◽  
Real Time ◽  
Wind Power ◽  
High Speed ◽  
Communication Protocol ◽  
Data Communication ◽  
Data Acquisition System ◽  
Slave System ◽  
The Real ◽  
Wind Power System

In this paper, the real-time EtherCAT technology is introduced in detail, which including operating principle, communication protocol and the superiority performance of EtherCAT i.e. synchronicity, simultaneousness and high speed. To show how to design a slave system that considering the characteristics of application, the method of developing systems based no EtherCAT technology are proposed. Finally, a data acquisition system based on EtherCAT technology is designed. Application of EtherCAT technology can improve the real-time characteristics of data communication in wind power system.

Multimode Adaptive Control for Tank Gun Control System Based on Tracking Differentiator

2011 ◽  
Vol 383-390 ◽  
pp. 79-85
Author(s):  
Dong Yuan ◽  
Xiao Jun Ma ◽  
Wei Wei
Keyword(s):  
Adaptive Control ◽  
Control System ◽  
High Speed ◽  
Control Method ◽  
Reference Model ◽  
Gun Control ◽  
Math Model ◽  
Tracking Differentiator ◽  
Switch Control ◽  
Model Reference Adaptive

Aiming at the problems such as switch impulsion, insurmountability for influence caused by nonlinearity in one tank gun control system which adopts double PID controller to realize the multimode switch control between high speed and low speed movement, the system math model is built up; And then, Model Reference Adaptive Control (MRAC) method based on nonroutine reference model is brought in and the adaptive gun controller is designed. Consequently, the compensation of nonlinearity and multimode control are implemented. Furthermore, the Tracking Differentiator (TD) is affiliated to the front of controller in order to restrain the impulsion caused by mode switch. Finally, the validity of control method in this paper is verified by simulation.

Sign in / Sign up

Export Citation Format

Share Document