Characteristics of Flat-Wall Impinging Spray Flame and Its Heat Transfer under Diesel Engine-Like Condition: Effects of Injection Pressure, Nozzle Hole Diameter and Impingement Distance

2019 ◽  
Author(s):  
Rizal Mahmud ◽  
Toru Kurisu ◽  
Onur Akgol ◽  
Keiya Nishida ◽  
Yoichi Ogata
Keyword(s):  
Heat Transfer ◽  
Diesel Engine ◽  
Injection Pressure ◽  
Hole Diameter ◽  
Flat Wall ◽  
Spray Flame ◽  
Nozzle Hole ◽  
Pressure Nozzle

Effects of Nozzle Hole Diameter and Injection Pressure on Fuel Adhesion of Flat-Wall Impinging Spray

2019 ◽  
Author(s):  
Hongliang Luo ◽  
Shintaro Uchitomi ◽  
Tomohiro Watanabe ◽  
Keiya Nishida ◽  
Youichi Ogata ◽  
...  
Keyword(s):  
Injection Pressure ◽  
Hole Diameter ◽  
Flat Wall ◽  
Nozzle Hole

Modelling and CFD Simulation of Effects of Spray Penetration on Piston Bowl Impingement in a DI Diesel Engine for Biodiesel-Diesel Blend (B20)

2012 ◽  
Author(s):  
Subhash Lahane ◽  
K. A. Subramanian
Keyword(s):  
Diesel Engine ◽  
Cfd Simulation ◽  
Injection Pressure ◽  
Spray Penetration ◽  
Penetration Distance ◽  
Piston Bowl ◽  
Fuel Jet ◽  
Wall Impingement ◽  
Di Diesel Engine ◽  
Nozzle Hole

The effect of spray penetration distance on fuel impingement on piston bowl of a 7.4 kW diesel engine for biodiesel-diesel blend (B20) was studied using modeling and CFD simulation. As the peak inline fuel pressure increased from 460 bar with base diesel to 480 bar with B20, the spray penetration distance (fuel jet) increases. It is observed from the study that the jet tip hits on piston bowl resulting to fuel impingement which is one of durability issues for use of biodiesel blend in the diesel engine. In addition to this, the simulation of effects of different injection pressures up to 2000 bar on spray penetration distance and wall impingement were also studied. The penetration distance increases with increase the in-line fuel pressure and it decreases with decrease nozzle hole diameter. The fuel impingement on piston bowl of the engine with high injection pressure (typically 1800 bar) can be avoided by decreasing the nozzle diameter from 0.19 mm to 0.1 mm. Increase in swirl ratio could also reduce fuel impingement problem.

scholarly journals The Differential Impact of Various Injection Pressures on the Exergy of a Diesel Engine Using Biodiesel-Diesel Fuel Blends

2021 ◽  
Vol 14 (1) ◽  
pp. 345
Author(s):  
Mostafa Kiani Deh Kiani ◽  
Sajad Rostami ◽  
Gholamhassan Najafi ◽  
Mohamed Mazlan
Keyword(s):  
Heat Transfer ◽  
Diesel Engine ◽  
Diesel Fuel ◽  
Exergy Analysis ◽  
Direct Injection ◽  
Injection Pressure ◽  
Cylinder Pressure ◽  
Fuel Blends ◽  
Lack Of Information ◽  
Good Agreement

Contrary to energy, exergy may be destroyed due to irreversibility. Exergy analysis can be used to reveal the location, and amount of energy losses of engines. Despite the importance of the exergy analysis, there is a lack of information in this area, especially when the engine is fueled with biodiesel–diesel fuel blends under various injection operating parameters. Thus, in this research, the exergy analysis of a direct-injection diesel engine using biodiesel–diesel fuel blends was performed. The fuel blends (B0, B20, B40, and B100) were injected into cylinders at pressures of 200 and 215 bars. Moreover, the simulation of exergy and energy analyses was done by homemade code. The simulation model was verified by compression of experimental and simulation in-cylinder pressure data. The results showed there was good agreement between simulation data and experimental ones. Results indicated that the highest level of in-cylinder pressure at injection pressure of 215 bars is more than that of 200 bars. Moreover, by increasing the percentage of biodiesel, the heat transfer exergy, irreversibility, burnt fuel, and exergy indicator decreased, but the ratio of these exergy parameters (except for heat transfer exergy) to fuel exergy increased. These ratios increased from 46 to 50.54% for work transfer exergy, 16.57 to 17.97% for irreversibility, and decreased from 16 to 15.49% for heat transfer exergy. In addition, these ratios at 215 bars are higher than at 200 bars for all fuels. However, with increasing the injection pressure and biodiesel concentration in fuel blends, the exergy and energy efficiencies increased.

Sign in / Sign up

Export Citation Format

Share Document