CFD-Guided Combustion System Optimization of a Gasoline Range Fuel in a Heavy-Duty Compression Ignition Engine Using Automatic Piston Geometry Generation and a Supercomputer

2019 ◽  
Author(s):  
Yuanjiang Pei ◽  
Pinaki Pal ◽  
Yu Zhang ◽  
Michael Traver ◽  
David Cleary ◽  
...  
Keyword(s):  
System Optimization ◽  
Compression Ignition ◽  
Combustion System ◽  
Heavy Duty ◽  
Compression Ignition Engine

scholarly journals Numerical simulations of dual fuel combustion in a heavy duty compression ignition engine

2015 ◽  
Vol 163 (4) ◽  
pp. 47-56
Author(s):  
Łukasz KAPUSTA
Keyword(s):  
Direct Injection ◽  
System Optimization ◽  
Injection System ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Fuel System ◽  
Heavy Duty ◽  
Liquid Form ◽  
Compression Ignition Engine ◽  
Compression Ignition Engines

In this study dual fuel direct injection was studied in terms of utilizing in compression ignition engines gaseous fuels with high octane number which are stored in liquid form, specifically liquid propane. Due to the fact that propane is not as much knock-resistant as natural gas, instead of conventional dual fuel system a system based on simultaneous direct injection of two fuel was selected as the most promissing one. Dual fuel operation was compared with pure diesel operation. The performed simulations showed huge potential of dual fuel system for burning light hydrocarbons in heavy duty compression ignition engines. However, further secondary fuel injection system optimization is required in order to improve atomization and lower the emissions.

Experimental Investigation of a Heavy-Duty Compression-Ignition Engine Retrofitted to Natural Gas Spark-Ignition Operation

2019 ◽  
Vol 141 (11) ◽  
Author(s):  
Jinlong Liu ◽  
Hemanth Kumar Bommisetty ◽  
Cosmin Emil Dumitrescu
Keyword(s):  
Natural Gas ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Compression Ignition ◽  
Heavy Duty ◽  
Compression Ignition Engine ◽  
Engine Operation ◽  
Cycle Variation ◽  
Spark Timing ◽  
Ci Engines

Heavy-duty compression-ignition (CI) engines converted to natural gas (NG) operation can reduce the dependence on petroleum-based fuels and curtail greenhouse gas emissions. Such an engine was converted to premixed NG spark-ignition (SI) operation through the addition of a gas injector in the intake manifold and of a spark plug in place of the diesel injector. Engine performance and combustion characteristics were investigated at several lean-burn operating conditions that changed fuel composition, spark timing, equivalence ratio, and engine speed. While the engine operation was stable, the reentrant bowl-in-piston (a characteristic of a CI engine) influenced the combustion event such as producing a significant late combustion, particularly for advanced spark timing. This was due to an important fraction of the fuel burning late in the squish region, which affected the end of combustion, the combustion duration, and the cycle-to-cycle variation. However, the lower cycle-to-cycle variation, stable combustion event, and the lack of knocking suggest a successful conversion of conventional diesel engines to NG SI operation using the approach described here.

Predicted Qualitative Effects of Alternate Liquid Fuels on Heavy-Duty Compression-Ignition Engines

2009 ◽  
Author(s):  
Gong Chen
Keyword(s):  
Fuel Injection ◽  
Cetane Number ◽  
Fuel Properties ◽  
Liquid Fuels ◽  
Compression Ignition ◽  
Heavy Duty ◽  
Compression Ignition Engine ◽  
End Effects ◽  
Compression Ignition Engines ◽  
The Impact

It is always desirable for a heavy-duty compression-ignition engine, such as a diesel engine, to possess a capability of using alternate liquid fuels without significant hardware modification to the engine baseline. Because fuel properties vary between various types of liquid fuels, it is important to understand the impact and effects of the fuel properties on engine operating and output parameters. This paper intends and attempts to achieve that understanding and to predict the qualitative effects by studying analytically and qualitatively how a heavy-duty compression-ignition engine would respond to the variation of fuel properties. The fuel properties considered in this paper mainly include the fuel density, compressibility, heating value, viscosity, cetane number, and distillation temperature range. The qualitative direct and end effects of the fuel properties on engine bulk fuel injection, in-cylinder combustion, and outputs are analyzed and predicted. Understanding these effects can be useful in analyzing and designing a compression-ignition engine for using alternate liquid fuels.

Sign in / Sign up

Export Citation Format

Share Document