Effects of Fiber Volume Fraction, Fiber Length and Fillers on Fracture Toughness, Impact Toughness and Fracture Energy of Glass Fiber Composite Panels

2018 ◽  
Author(s):  
Haseeb Ali ◽  
Ahmad Waqar Tehami
Keyword(s):  
Fracture Toughness ◽  
Impact Toughness ◽  
Glass Fiber ◽  
Fracture Energy ◽  
Fiber Length ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Fiber Composite ◽  
Fiber Volume ◽  
Glass Fiber Composite

Application of Carbon Fiber-Based Composite for Electric Vehicle

2014 ◽  
Vol 896 ◽  
pp. 574-577 ◽  
Author(s):  
Miftahul Anwar ◽  
Indro Cahyono Sukmaji ◽  
Wisnu R. Wijang ◽  
Kuncoro Diharjo
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Glass Fiber ◽  
External Load ◽  
Volume Fraction ◽  
Fiber Composite ◽  
Impact Testing ◽  
Fiber Volume ◽  
Glass Fiber Composite ◽  
Hybrid Carbon

In the present work, we study how to improve mechanical properties of carbon fiber reinforced plastics (CFRP) in order to increase crashworthiness probability. Experimentally, hybrid carbon /glass fiber composite was made in order to get higher mechanical properties. As a results, with increasing carbon fiber volume fraction (% vol.), tensile strength and flexural strength of the composite are increased. Simulation of impact testing is also performed using data properties taken from the experiment with variation of impact forces on front bumper structure. By varying external load to the bumper, the result shows that higher thickness of hybrid carbon/glass fiber composite has always smaller stress values than thinner one. On the other hand, the displacement of hybrid carbon/glass car bumper increases linearly with increasing external load.

Effects of vacuum pressure, inlet pressure, and mold temperature on the void content, volume fraction of polyester/e-glass fiber composites manufactured with VARTM process

2011 ◽  
Vol 45 (26) ◽  
pp. 2727-2742 ◽  
Author(s):  
Vishwanath R. Kedari ◽  
Basil I. Farah ◽  
Kuang-Ting Hsiao
Keyword(s):  
Glass Fiber ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Fiber Composite ◽  
Mold Temperature ◽  
Vacuum Pressure ◽  
Inlet Pressure ◽  
Void Content ◽  
Fiber Volume ◽  
Vartm Process

Vacuum-assisted resin transfer molding (VARTM) process is one of the liquid composite molding (LCM) processes aimed at producing high-quality composite parts. The void content and fiber volume fraction of a VARTM part can be affected by many parameters and is critical to the mechanical properties and the quality of the part. In this paper, a series of experiments were conducted with a heated dual pressure control VARTM setup for investigating the effects of vacuum pressure, inlet pressure, and mold temperature on the void content and fiber volume fraction of polyester/E-glass fiber composite. It was found that stronger vacuum and higher mold temperature can better control and increase the fiber volume fraction; however, such a combination of strong vacuum and high mold temperature may also require a reduced inlet pressure for minimizing the void content. The need of pressure reduction can be explained with the compatibility between Darcy's flow and capillary flow in the fiber preform and can be calculated based on the room temperature VARTM results. The experimental results suggest that high mold temperature, high vacuum, and appropriately reduced inlet pressure can produce a VARTM part with high fiber volume fraction and low void content.

Determination of the Directional Dependent In-Plane Thermal Conductivity of K63B12 Pitch-Fiber/Epoxy Composite

2004 ◽  
Author(s):  
Jessica N. McClay ◽  
Peter Joyce ◽  
Andrew N. Smith
Keyword(s):  
Thermal Conductivity ◽  
Thermal Management ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Epoxy Composite ◽  
Fiber Composite ◽  
Fiber Volume ◽  
State Technique ◽  
Fiber Composite Materials

Measurements of the in-plane thermal conductivity and the directional dependence of Mitsubishi K63B12 pitch-fiber/Epoxy composite from Newport Composites are reported. This composite is being explored for use in the Avanced Seal Delivery System for effective thermal management. The thermal conductivity was measured using a steady state technique. The experimental results were then compared to a model of the thermal conductivity based on the direction of the fibers. These estimates are based on the properties of the constituent materials and volume of fibers in the sample. Therefore the density and the fiber volume fraction were experimentally measured. The thermal conductivity is clearly greatest in the direction of the fibers and decreases as the fibers are rotated off axis. In the case of pitch fiber composite materials, the contribution of the fibers to the thermal conductivity dominates. The experimental data clearly followed the correct trends; however, the measured values were 25% to 35% lower than predicted.

scholarly journals Cyclic Relaxation, Impact Properties and Fracture Toughness of Carbon and Glass Fiber Reinforced Composite Laminates

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7412
Author(s):  
Mohammed Y. Abdellah ◽  
Mohamed K. Hassan ◽  
Ahmed F. Mohamed ◽  
Ahmed H. Backar
Keyword(s):  
Fracture Toughness ◽  
Glass Fiber ◽  
Composite Laminates ◽  
Fiber Composite ◽  
Impact Behavior ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced ◽  
Glass Fiber Composite ◽  
Cyclic Relaxation ◽  
The Impact

In this paper, the mechanical properties of fiber-reinforced epoxy laminates are experimentally tested. The relaxation behavior of carbon and glass fiber composite laminates is investigated at room temperature. In addition, the impact strength under drop-weight loading is measured. The hand lay-up technique is used to fabricate composite laminates with woven 8-ply carbon and glass fiber reinforced epoxy. Tensile tests, cyclic relaxation tests and drop weight impacts are carried out on the carbon and glass fiber-reinforced epoxy laminates. The surface release energy GIC and the related fracture toughness KIC are important characteristic properties and are therefore measured experimentally using a standard test on centre-cracked specimens. The results show that carbon fiber-reinforced epoxy laminates with high tensile strength give high cyclic relaxation performance, better than the specimens with glass fiber composite laminates. This is due to the higher strength and stiffness of carbon fiber-reinforced epoxy with 600 MPa compared to glass fiber-reinforced epoxy with 200 MPa. While glass fibers show better impact behavior than carbon fibers at impact energies between 1.9 and 2.7 J, this is due to the large amount of epoxy resin in the case of glass fiber composite laminates, while the impact behavior is different at impact energies between 2.7 and 3.4 J. The fracture toughness KIC is measured to be 192 and 31 MPa √m and the surface energy GIC is measured to be 540.6 and 31.1 kJ/m2 for carbon and glass fiber-reinforced epoxy laminates, respectively.

Single and repeated low-velocity impact response of E-glass fiber-reinforced epoxy and polypropylene composites for different impactor shapes

2019 ◽  
pp. 089270571988691 ◽  
Author(s):  
Akar Dogan
Keyword(s):  
Glass Fiber ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Low Velocity Impact ◽  
Fiber Reinforced ◽  
Low Velocity ◽  
Fiber Volume ◽  
Velocity Impact ◽  
Polypropylene Composites ◽  
Glass Fiber Reinforced

This study focuses on the effects of low-velocity impact (LVI) response of thermoset (TS) and thermoplastic (TP) matrix-based composites. In this study, the effects of the impactor shapes on the low-velocity impact response of the composite panels that produced from different matrix was investigated. Unidirectional E-glass fiber fabrics with an areal density of 300 g/m2 as reinforcement and epoxy matrix were used to produce TS composite. The vacuum-assisted resin infusion molding (VARIM) method was used to manufacture composite panels. The thermoplastic composites were manufactured with E-glass fiber-reinforced polypropylene prepregs. The tensile strength of TS matrix-based composites is higher than TP matrix-based composites that have the same fiber volume fraction. Despite being under the same impact energy, the TP specimens possess higher perforation threshold than TS specimens. The shape of the impactor significantly affected the perforation threshold. Besides, the impact number that caused perforation reduced dramatically in conical impactor. The repeated impact number that caused perforation is 36 for hemispherical (HS) impactor, but it is only 3 for conical impactor for polypropylene matrix-based composite. Moreover, a significant effect of fiber volumetric ratio on impact resistance was observed. The perforation threshold of glass fiber-reinforced polypropylene composites for 40% and 50% fiber volume fraction are 61 and 98 J, respectively. The perforation threshold of TP and TS specimens for HS impactor that has the same stacking sequence is 61 and 55 J, respectively.

Sign in / Sign up

Export Citation Format

Share Document