The Use of Split-Injection Technique and Ethanol Lean Combustion on a SIDI Engine Operation for Reducing the Fuel Consumption and Pollutant Emissions

2017 ◽  
Author(s):  
Thiago R. V. Silva ◽  
José G. C. Baeta ◽  
Nilton A. D. Neto ◽  
Augusto C. T. Malaquias ◽  
Matheus G. F. Carvalho ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Pollutant Emissions ◽  
Injection Technique ◽  
Split Injection ◽  
Engine Operation ◽  
Lean Combustion

An Energy Efficient Power-Split Hybrid Transmission System to Drive Hydraulic Implements in Construction Machines

2021 ◽  
Author(s):  
Mateus Bertolin ◽  
Andrea Vacca
Keyword(s):  
Fuel Consumption ◽  
Pollutant Emissions ◽  
Engine Operation ◽  
Construction Machinery ◽  
Load Sensing ◽  
Parallel Hybrid ◽  
Power Split ◽  
Truck Loading ◽  
Hybrid Transmission ◽  
Efficient Power

Abstract This paper proposes a novel hybrid power-split transmission to drive hydraulic implements in construction machinery. The highly efficient power-split hybrid transmission is combined with displacement controlled (DC) actuators to eliminate throttling losses within the hydraulic system and achieve higher fuel savings. The architecture design, sizing and power management are addressed. Simulation results considering a realistic truck-loading cycle on a mini excavator demonstrate the feasibility of the idea. A systematic comparison between the proposed system and the previously developed series-parallel hybrid is also carried out. The paper compares engine operation and fuel consumption of the previously mentioned hybrid system with the original non-hybrid load-sensing machine. It is shown that by implementing an efficient engine operation control, the proposed system can achieve up to 60.2% improvement in fuel consumption when compared to the original machine and consume 11.8% less than the previously developed series-parallel hybrid with DC actuation. Other advantages of the proposed solution include a much steadier engine operation, which opens to the possibility of designing an engine for optimal consumption and emissions at a single operating point as well as greatly reduce pollutant emissions. A steadier prime mover operation should also benefit fully electric machines, as the battery would not be stressed with heavy transients.

A Natural Gas Engine Combustion Rig With High-Speed Photography

1988 ◽  
Vol 110 (3) ◽  
pp. 334-342 ◽  
Author(s):  
W. E. Snyder ◽  
M. R. Wright ◽  
S. G. Dexter
Keyword(s):  
Natural Gas ◽  
Fuel Consumption ◽  
High Speed ◽  
High Energy ◽  
High Speed Photography ◽  
Engine Operation ◽  
Gas Engine ◽  
Lean Combustion ◽  
Individual Variables ◽  
The Individual

Engines today must satisfy stringent emission requirements but must at the same time have low fuel consumption. One method of approaching both of these goals in spark-ignited natural gas engines is with lean combustion. The use of as much as 80 percent excess air significantly reduces the peak combustion temperature and, as compared to a stoichiometric engine, reduces the NOx emissions by up to 90 percent and the fuel consumption by up to 15 percent. One limitation on lean combustion, however, is the high energy needed for ignition. In larger engines, a small prechamber containing an easily ignitable near-stoichiometric mixture has proved to be both successful and popular as one method of producing the necessary high ignition energy. Although this form of stratified charge combustion has been known for many years, its development has largely been the result of “cut and try” procedures. Lack of access for suitable instrumentation, combined with the difficulty of isolating the individual variables which affect performance, has limited the fundamental understanding of the mechanism of prechamber combustion. This paper summarizes results from a research program where a constant-volume combustion rig is used to simulate engine operation. Emphasis is placed on high-speed photography of the prechamber combustion. A second program on a single-cylinder prechamber spark-ignited gas engine and a third on a multiple-cylinder engine will be reported in subsequent papers.

scholarly journals Real Driving Emissions—Conception of a Data-Driven Calibration Methodology for Hybrid Powertrains Combining Statistical Analysis and Virtual Calibration Platforms

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4747
Author(s):  
Sascha Krysmon ◽  
Frank Dorscheidt ◽  
Johannes Claßen ◽  
Marc Düzgün ◽  
Stefan Pischinger
Keyword(s):  
Fuel Consumption ◽  
Test Bench ◽  
New Technologies ◽  
Control Strategies ◽  
Measurement Data ◽  
Operating Conditions ◽  
Pollutant Emissions ◽  
Engine Operation ◽  
Trade Offs ◽  
Calibration Time

The combination of different propulsion and energy storage systems for hybrid vehicles is changing the focus in the field of powertrain calibration. Shorter time-to-market as well as stricter legal requirements regarding the validation of Real Driving Emissions (RDE) require the adaptation of current procedures and the implementation of new technologies in the powertrain development process. In order to achieve highest efficiencies and lowest pollutant emissions at the same time, the layout and calibration of the control strategies for the powertrain and the exhaust gas aftertreatment system must be precisely matched. An optimal operating strategy must take into account possible trade-offs in fuel consumption and emission levels, both under highly dynamic engine operation and under extended environmental operating conditions. To achieve this with a high degree of statistical certainty, the combination of advanced methods and the use of virtual test benches offers significant potential. An approach for such a combination is presented in this paper. Together with a Hardware-in-the-Loop (HiL) test bench, the novel methodology enables a targeted calibration process, specifically designed to address calibration challenges of hybridized powertrains. Virtual tests executed on a HiL test bench are used to efficiently generate data characterizing the behavior of the system under various conditions with a statistically based evaluation identifying white spots in measurement data, used for calibration and emission validation. In addition, critical sequences are identified in terms of emission intensity, fuel consumption or component conditions. Dedicated test scenarios are generated and applied on the HiL test bench, which take into account the state of the system and are adjusted depending on it. The example of one emission calibration use case is used to illustrate the benefits of using a HiL platform, which achieves approximately 20% reduction in calibration time by only showing differences of less than 2% for fuel consumption and emission levels compared to real vehicle tests.

DIESEL ENGINE OPERATION IN USE OF FUEL WITH ADDITIVES

2018 ◽  
pp. 18-24
Author(s):  
Petar Kazakov ◽  
Atanas Iliev ◽  
Emil Marinov
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Internal Combustion Engines ◽  
Experimental Studies ◽  
Combustion Engines ◽  
Engine Operation ◽  
Factors Affecting ◽  
Operating Modes ◽  
Positive Effects

Over the decades, more attention has been paid to emissions from the means of transport and the use of different fuels and combustion fuels for the operation of internal combustion engines than on fuel consumption. This, in turn, enables research into products that are said to reduce fuel consumption. The report summarizes four studies of fuel-related innovation products. The studies covered by this report are conducted with diesel fuel and usually contain diesel fuel and three additives for it. Manufacturers of additives are based on already existing studies showing a 10-30% reduction in fuel consumption. Comparative experimental studies related to the use of commercially available diesel fuel with and without the use of additives have been performed in laboratory conditions. The studies were carried out on a stationary diesel engine СМД-17КН equipped with brake КИ1368В. Repeated results were recorded, but they did not confirm the significant positive effect of additives on specific fuel consumption. In some cases, the factors affecting errors in this type of research on the effectiveness of fuel additives for commercial purposes are considered. The reasons for the positive effects of such use of additives in certain engine operating modes are also clarified.

scholarly journals Factors Affecting the Rate of Fuel Consumption in Aircrafts

2021 ◽  
Vol 13 (14) ◽  
pp. 8066
Author(s):  
Thowayeb H. Hassan ◽  
Abu Elnasr E. Sobaih ◽  
Amany E. Salem
Keyword(s):  
Fuel Consumption ◽  
Positive Association ◽  
Pollutant Emissions ◽  
Aviation Industry ◽  
Factors Affecting ◽  
Fuel Flow ◽  
Homogeneity Of Variance ◽  
Strong Positive Association ◽  
Ground Distance ◽  
The Cost

The cost of fuel and its availability are among the most major concerns for aircrafts and the aviation industry overall. Environmental difficulties with chemical pollutant emissions emitted by aviation machines are also connected to fuel consumption. As a result, it is crucial to examine factors that affect the overall fuel usage and consumption in the airport-based aviation industry. Several variables were investigated related to the total fuel consumed, such as dry operating weight (DOW) (KG), zero-fuel weight (ZFW), take-off weight (TOW), air distance (AIR DIST) (KM), and ground distance (GDN DIST). Analysis of the correlation between total fuel consumed as well as the extra fuel and selected variables was conducted. The results showed that the most positively associated factors with the total used fuel were the air distance (r2 = 0.86, p < 0.01), ground distance (r2 = 0.78, p < 0.01), TOW (r2 = 0.68, p < 0.01), and flight time (r2 = 0.68, p < 0.01). There was also a strong positive association between the average fuel flow (FF) and actual TOW (r2 = 0.74, p < 0.01) as well as ZFW (r2 = 0.61, p < 0.01). The generalized linear model (GLM) was utilized to assess the predictions of total energy usage after evaluating important outliers, stability of the homogeneity of variance, and the normalization of the parameter estimation. The results of multiple linear regression revealed that the most significant predictors of the total consumed fuel were the actual ZFW (p < 0.01), actual TOW (p < 0.01), and actual average FF (p < 0.05). The results interestingly confirmed that wind speed has some consequences and effects on arrival fuel usage. The result reflects that thermal and hydrodynamic economies impact on the flying fuel economy. The research has various implications for both scholars and practitioners of aviation industry.

A Multidisciplinary Approach for the Comprehensive Assessment of Integrated Rotorcraft–Powerplant Systems at Mission Level

2014 ◽  
Vol 137 (1) ◽  
Author(s):  
Ioannis Goulos ◽  
Fakhre Ali ◽  
Konstantinos Tzanidakis ◽  
Vassilios Pachidis ◽  
Roberto d'Ippolito
Keyword(s):  
Environmental Impact ◽  
Fuel Consumption ◽  
Comprehensive Assessment ◽  
Pollutant Emissions ◽  
Operational Performance ◽  
Civil Aviation ◽  
Accurate Estimation ◽  
Nox Emissions ◽  
Reactor Model ◽  
Stirred Reactor

This paper presents an integrated methodology for the comprehensive assessment of combined rotorcraft–powerplant systems at mission level. Analytical evaluation of existing and conceptual designs is carried out in terms of operational performance and environmental impact. The proposed approach comprises a wide-range of individual modeling theories applicable to rotorcraft flight dynamics and gas turbine engine performance. A novel, physics-based, stirred reactor model is employed for the rapid estimation of nitrogen oxides (NOx) emissions. The individual mathematical models are implemented within an elaborate numerical procedure, solving for total mission fuel consumption and associated pollutant emissions. The combined approach is applied to the comprehensive analysis of a reference twin-engine light (TEL) aircraft modeled after the Eurocopter Bo 105 helicopter, operating on representative mission scenarios. Extensive comparisons with flight test data are carried out and presented in terms of main rotor trim control angles and power requirements, along with general flight performance charts including payload-range diagrams. Predictions of total mission fuel consumption and NOx emissions are compared with estimated values provided by the Swiss Federal Office of Civil Aviation (FOCA). Good agreement is exhibited between predictions made with the physics-based stirred reactor model and experimentally measured values of NOx emission indices. The obtained results suggest that the production rates of NOx pollutant emissions are predominantly influenced by the behavior of total air inlet pressure upstream of the combustion chamber, which is affected by the employed operational procedures and the time-dependent all-up mass (AUM) of the aircraft. It is demonstrated that accurate estimation of on-board fuel supplies ahead of flight is key to improving fuel economy as well as reducing environmental impact. The proposed methodology essentially constitutes an enabling technology for the comprehensive assessment of existing and conceptual rotorcraft–powerplant systems, in terms of operational performance and environmental impact.

Effects of H2 Addition to CNG Blends on Cycle-to-Cycle and Cylinder-to-Cylinder Combustion Variation in an SI Engine

2012 ◽  
Author(s):  
Mirko Baratta ◽  
Stefano d’Ambrosio ◽  
Daniela Misul ◽  
Ezio Spessa
Keyword(s):  
Diagnostic Tool ◽  
Combustion Process ◽  
Experimental Tests ◽  
Test Point ◽  
Pollutant Emissions ◽  
Engine Operation ◽  
Pressure Transducers ◽  
Rate Analysis ◽  
Spark Plug ◽  
Wide Range

An experimental investigation and a burning-rate analysis have been performed on a production 1.4 liter CNG (compressed natural gas) engine fueled with methane-hydrogen blends. The engine features a pent-roof combustion chamber, four valves per cylinder and a centrally located spark plug. The experimental tests have been carried out in order to quantify the cycle-to-cycle and the cylinder-to-cylinder combustion variation. Therefore, the engine has been equipped with four dedicated piezoelectric pressure transducers placed on each cylinder and located by the spark plug. At each test point, in-cylinder pressure, fuel consumption, induced air mass flow rate, pressure and temperature at different locations on the engine intake and exhaust systems as well as ‘engine-out’ pollutant emissions have been measured. The signals correlated to the engine operation have been acquired by means of a National Instruments PXI-DAQ system and a home developed software. The acquired data have then been processed through a combustion diagnostic tool resulting from the integration of an original multizone thermodynamic model with a CAD procedure for the evaluation of the burned-gas front geometry. The diagnostic tool allows the burning velocities to be computed. The tests have been performed over a wide range of engine speeds, loads and relative air-fuel ratios (up to the lean operation). For stoichiometric operation, the addition of hydrogen to CNG has produced a bsfc reduction ranging between 2 to 7% and a bsTHC decrease up to the 40%. These benefits have appeared to be even higher for lean mixtures. Moreover, hydrogen has shown to significantly enhance the combustion process, thus leading to a sensibly lower cycle-to-cycle variability. As a matter of fact, hydrogen addition has generally resulted into extended operation up to RAFR = 1.8. Still, a discrepancy in the abovementioned conclusions was observed depending on the engine cylinder considered.

Numerical and Experimental Study on the Impact of Mild Cold EGR on Exhaust Emissions in a Biodiesel Fueled Diesel Engine

2021 ◽  
Author(s):  
Alex Oliveira ◽  
Junfeng Yang ◽  
Jose Sodre
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Exhaust Emissions ◽  
Pollutant Emissions ◽  
Cylinder Pressure ◽  
Nox Formation ◽  
Ratio Distribution ◽  
Engine Model ◽  
Gas Recirculation ◽  
The Impact

Abstract This work evaluated the effect of cooled exhaust gas recirculation (EGR) on fuel consumption and pollutant emissions from a diesel engine fueled with B8 (a blend of biodiesel and Diesel 8:92%% by volume), experimentally and numerically. Experiments were carried out on a Diesel power generator with varying loads from 5 kW to 35 kW and 10% of cold EGR ratio. Exhaust emissions (e.g. THC, NOX, CO etc.) were measured and evaluated. The results showed mild EGR and low biodiesel content have minor impact of engine specific fuel consumption, fuel conversion efficiency and in-cylinder pressure. Meanwhile, the combination of EGR and biodiesel reduced THC and NOX up to 52% and 59%, which shows promising effect on overcoming the PM-NOX trade-off from diesel engine. A 3D CFD engine model incorporated with detailed biodiesel combustion kinetics and NOx formation kinetics was validated against measured in-cylinder pressure, temperature and engine-out NO emission from diesel engine. This valid model was then employed to investigate the in-cylinder temperature and equivalence ratio distribution that predominate NOx formation. The results showed that the reduction of NOx emission by EGR and biodiesel is obtained by a little reduction of the local in-cylinder temperature and, mainly, by creating comparatively rich combusting mixture.

scholarly journals Real-World Measurement of Hybrid Buses’ Fuel Consumption and Pollutant Emissions in a Metropolitan Urban Road Network

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2569 ◽  
Author(s):  
Christos Keramydas ◽  
Georgios Papadopoulos ◽  
Leonidas Ntziachristos ◽  
Ting-Shek Lo ◽  
Kwok-Lam Ng ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Road Network ◽  
Pollutant Emissions ◽  
Emission Measurement ◽  
Body Type ◽  
Urban Road Network ◽  
Urban Road ◽  
Wide Range ◽  
The Mean ◽  
Consumption Benefits

This study investigates pollutant emissions and fuel consumption of six Euro VI hybrid-diesel public transport buses operating on different scheduled routes in a metropolitan urban road network. Portable emission measurement systems (PEMS) are used in measurements and results are compared to those obtained from a paired number of Euro V conventional buses of the same body type used as control over the same routes. The selected routes vary from urban to highway driving and the experimentation was conducted over the first half of 2015. The available emissions data correspond to a wide range of driving, operating, and ambient conditions. Fuel consumption, distance- and energy-based emission levels are derived and presented in a comparative manner. The effect of different factors, including speed, ambient temperature, and road grade on fuel consumption and emissions performance is investigated. Mean fuel consumption of hybrid buses was found 6.1% lower than conventional ones, from 20% lower up to 16% higher, over six routes tested in total. The mean route difference between the two technologies was not statistically significant. Air conditioning decreased consumption benefits of the hybrid buses. Decrease of the mean route speed from 15 km h−1 tο 8 km h−1 increased the hybrid buses consumption by 63%. Nitrogen oxides (NOx) emissions of the Euro VI hybrid buses were 93 ± 5% lower than conventional Euro V ones. Nitrous oxide (N2O) emissions from hybrid Euro VI buses made up 5.9% of total greenhouse gas emissions and largely offset carbon dioxide (CO2) benefits. The results suggest that hybrid urban buses need to be assessed under realistic operation and environmental conditions to assess their true environmental and fuel consumption benefits.

Sign in / Sign up

Export Citation Format

Share Document