Phenomenological 0-Dimensional Combustion Model for Spark-Ignition Natural Gas Engine Equipped with Pre-Chamber

2016 ◽  
Author(s):  
Kenji Hiraoka ◽  
Kazutoshi Nomura ◽  
Akihiro Yuuki ◽  
Yuji Oda ◽  
Toshiyuki Kameyama
Keyword(s):  
Natural Gas ◽  
Spark Ignition ◽  
Combustion Model ◽  
Gas Engine ◽  
Natural Gas Engine

Numerical and Experimental Characterization of a Natural Gas Engine With Partially Stratified Charge Spark Ignition

2010 ◽  
Vol 133 (2) ◽  
Author(s):  
E. C. Chan ◽  
M. H. Davy ◽  
G. de Simone ◽  
V. Mulone
Keyword(s):  
Natural Gas ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Combustion Model ◽  
Turbulence Energy ◽  
Turbulent Fluctuation ◽  
Stratified Charge ◽  
Gas Engine ◽  
Natural Gas Engine

This paper outlines the development of a comprehensive numerical framework for the partially stratified charge (PSC) lean-burn natural gas engine. A 3D model of the engine was implemented to represent fluid motion and combustion. The spark ignition model was based on the works of Herweg and Maly (1992, “A Fundamental Model for Flame Kernel Formation in SI Engines,” SAE Technical Publication, Paper No. 922243) and Tan and Reitz (2006, “An Ignition and Combustion Model Based on the Level-Set Method for Spark Ignition Engine Multidimensional Modeling,” Combust. Flame, 145, pp. 1–15). The EDC model (Ertesvåg and Magnussen, 2000, “The Eddy Dissipation Turbulence Energy Cascade Model,” Combust. Sci. Technol., 159, pp. 213–235) with a two-step mechanism was used to model natural gas turbulent combustion process. An open geometry simulation strategy was adopted to account for intake-exhaust gas and valve movements. Each simulation was executed for multiple cycles to produce a representative residual gas fraction. The numerical results were compared with the experimental data obtained on the Ricardo Hydra single cylinder research engine for both homogeneous and PSC cases and they were found to be in excellent agreement in pressure trace and heat release rate. The detailed investigation of the numerical data showed the development of an ignitable mixture under PSC cases, allowing stable kernel growth well beyond the lean misfire limit of the bulk mixture. Furthermore, limits on successful ignition can be identified using the ignition model, which exhibited self-similar behavior in terms of flame speed and turbulent fluctuation. It can also be shown that, at ultralean air-fuel ratios, the PSC plume helps replicate the ignition conditions that can be found under stoichiometric operation.

Assessment of Turbulent Combustion Models for Simulating Pre-Chamber Ignition in a Natural Gas Engine

2021 ◽  
Author(s):  
Joohan Kim ◽  
Riccardo Scarcelli ◽  
Sibendu Som ◽  
Ashish Shah ◽  
Munidhar Biruduganti ◽  
...  
Keyword(s):  
Natural Gas ◽  
Turbulent Combustion ◽  
High Efficiency ◽  
Turbulent Flame ◽  
Spark Ignition ◽  
Cylinder Wall ◽  
Gas Engine ◽  
Natural Gas Engine ◽  
Combustion Models ◽  
Combustion Processes

Abstract Lean combustion in an internal combustion engine is a promising strategy to increase thermal efficiency by leveraging a more favorable specific heat ratio of the fresh mixture and simultaneously suppressing the heat losses to the cylinder wall. However, unstable ignition events and slow flame propagation at fuel-lean condition lead to high cycle-to-cycle variability and hence limit the high-efficiency engine operating range. Pre-chamber ignition is considered an effective concept to extend the lean operating limit, by providing spatially distributed ignition with multiple turbulent flame-jets and enabling faster combustion rate compared to the conventional spark ignition approach. From a numerical modeling perspective, to date, still the science base and available simulation tools are inadequate for understanding and predicting the combustion processes in pre-chamber ignited engines. In this paper, conceptually different RANS combustion models widely adopted in the engine modeling community were used to simulate the ignition and combustion processes in a medium-duty natural gas engine with a pre-chamber spark-ignition system. A flamelet-based turbulent combustion model, i.e., G-equation, and a multi-zone well-stirred reactor model were employed for the multi-dimensional study. Simulation results were compared with experimental data in terms of in-cylinder pressure and heat release rate. Finally, the analysis of the performance of the two models is carried out to highlight the strengths and limitations of the two formulations respectively.

Assessment of Turbulent Combustion Models for Simulating Pre-Chamber Ignition in a Natural Gas Engine

2019 ◽  
Author(s):  
Joohan Kim ◽  
Riccardo Scarcelli ◽  
Sibendu Som ◽  
Ashish Shah ◽  
Munidhar S. Biruduganti ◽  
...  
Keyword(s):  
Natural Gas ◽  
Turbulent Combustion ◽  
High Efficiency ◽  
Turbulent Flame ◽  
Spark Ignition ◽  
Cylinder Wall ◽  
Gas Engine ◽  
Natural Gas Engine ◽  
Combustion Models ◽  
Combustion Processes

Abstract Lean combustion in an internal combustion engine is a promising strategy to increase thermal efficiency by leveraging a more favorable specific heat ratio of the fresh mixture and simultaneously suppressing the heat losses to the cylinder wall. However, unstable ignition events and slow flame propagation at fuel-lean condition lead to high cycle-to-cycle variability and hence limit the high-efficiency engine operating range. Pre-chamber ignition is considered an effective concept to extend the lean operating limit, by providing spatially distributed ignition with multiple turbulent flame-jets and enabling faster combustion rate compared to the conventional spark ignition approach. From a numerical modeling perspective, to date, still the science base and available simulation tools are inadequate for understanding and predicting the combustion processes in pre-chamber ignited engines. In this paper, conceptually different RANS combustion models widely adopted in the engine modeling community were used to simulate the ignition and combustion processes in a medium-duty natural gas engine with a pre-chamber spark-ignition system. A flamelet-based turbulent combustion model, i.e., G-equation, and a multi-zone well-stirred reactor model were employed for the multi-dimensional study. Simulation results were compared with experimental data in terms of in-cylinder pressure and heat release rate. Finally, the analysis of the performance of the two models is carried out to highlight the strengths and limitations of the two formulations respectively.

Laser Ignition of Natural Gas Engines Using Fiber Delivery

2005 ◽  
Author(s):  
Azer P. Yalin ◽  
Morgan W. Defoort ◽  
Sachin Joshi ◽  
Daniel Olsen ◽  
Bryan Willson ◽  
...  
Keyword(s):  
Natural Gas ◽  
Past Research ◽  
Spark Ignition ◽  
Laser Source ◽  
Laser Ignition ◽  
Ignition System ◽  
Gas Engine ◽  
Natural Gas Engines ◽  
Natural Gas Engine ◽  
Design Concepts

A practical impediment to implementation of laser ignition systems has been the open-path beam delivery used in past research. In this contribution, we present the development and implementation of a fiber-optically delivery laser spark ignition system. To our knowledge, the work represents the first demonstration of fiber coupled laser ignition (using a remote laser source) of a natural gas engine. A Nd:YAG laser is used as the energy source and a coated hollow fiber is used for beam energy delivery. The system was implemented on a single-cylinder of a Waukesha VGF 18 turbo charged natural gas engine and yielded consistent and reliable ignition. In addition to presenting the design and testing of the fiber delivered laser ignition system, we present initial design concepts for a multiplexer to ignite multiple cylinders using a single laser source, and integrated optical diagnostic approaches to monitor the spark ignition and combustion performance.

scholarly journals Computational study of influence of inflow port channel design on spark-ignition natural gas engine parameters

2018 ◽  
Vol 245 ◽  
pp. 09001 ◽  
Author(s):  
Pavel Patsey ◽  
Yuriy Galyshev
Keyword(s):  
Kinetic Energy ◽  
Natural Gas ◽  
Combustion Chamber ◽  
Turbulent Kinetic Energy ◽  
Computational Study ◽  
Spark Ignition ◽  
Chemical Processes ◽  
Gas Engine ◽  
Natural Gas Engine ◽  
Physical And Chemical

Resistance is The article presents the results of the research of a charge swirl motion influence on working process, engine parameters and NOx emissions of a spark ignition premixed natural gas engine. The charge swirl motion was organized by tangential inflow channel. The engine work process research was performed using numerical modeling of physical and chemical processes in combustion chamber. The turbulent flow in combustion chamber, spark ignition and combustion of gas fuel were simulated. The simulation shows that a tangential channel allowed organizing a swirl motion of charge and increasing turbulent kinetic energy of flow in the combustion chamber. Swirl motion greatly affects the combustion process. The increase in the turbulent kinetic energy to the spark timing made it possible to substantially reduce the combustion time of the fuel. Replacement of one original channel by a tangential channel allowed reducing emissions of nitrogen oxides NOx. Physical and chemical processes in combustion chamber were simulated in Ansys Forte.

Sign in / Sign up

Export Citation Format

Share Document