Study for Effects of Bio-Diesel Fuel and Engine Oil on Exhaust Emission and PN of Diesel Engine

2015 ◽  
Author(s):  
Kazutoshi Mori ◽  
Koji Sorimachi ◽  
Kunihisa Eguchi ◽  
Jun Kawase ◽  
Ryuichi Suzuki
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Engine Oil ◽  
Exhaust Emission

Diesel Fuel Multiple Injection Effects on Emission Characteristics of Diesel Engine Mixed Ammonia Gas Into Intake Air

2019 ◽  
Vol 141 (6) ◽  
Author(s):  
Yoichi Niki ◽  
Yoshifuru Nitta ◽  
Hidenori Sekiguchi ◽  
Koichi Hirata
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Internal Combustion Engines ◽  
Experimental Results ◽  
Exhaust Emission ◽  
N2o Emissions ◽  
Emission Characteristics ◽  
Exhaust Gas ◽  
N2o Production ◽  
Combustion Processes

This study focuses NH3 as an alternative fuel for internal combustion engines, because NH3 is known as a H2 carrier and its combustion does not produce CO2 causing global warming. On the other hand, some reports show that unburned NH3 and N2O appear in exhaust gas, when NH3 is used as fuel for compression ignition or spark ignition engines. NH3 is toxic and N2O is one of the greenhouse gases. These emissions should not be emitted. These reports point out that exhaust gas after treatments and/or injection strategies can be effective to reduce these emissions. From our previous investigations, it was confirmed that NH3 and N2O were contained in the exhaust gas of a conventional diesel engine with NH3 gas mixed into the engine intake. In this study, NH3 combustion processes in the diesel engine were investigated from the experimental results. Based on the investigations, a pilot or postinjection was conducted to reduce emissions of NH3 and N2O. In this paper, first the experimental results of the combustion and exhaust emission characteristics on the conventional diesel engine with NH3 gas mixed into the engine intake are shown. NH3 and N2O emissions are then verified by analyzing the exhaust gas. Next, NH3 combustion processes in the diesel engine are considered from the experimental results to report on the effects of a pilot and postdiesel fuel injection on NH3 and N2O production processes. The experimental results suggest that the multiple diesel fuel injections would be one of the effective measures to reduce N2O and NH3 emissions on NH3 and diesel dual-fueled engine.

scholarly journals Effect of cetane improver addition into diesel fuel: Methanol mixtures on performance and emissions at different injection pressures

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 555-566 ◽  
Author(s):  
Feyyaz Candan ◽  
Murat Ciniviz ◽  
Ilker Ors
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Injection Pressure ◽  
Specific Fuel Consumption ◽  
Exhaust Emission ◽  
Brake Specific Fuel Consumption ◽  
Consumption Values ◽  
Smoke Opacity

In this study, methanol in ratios of 5-10-15% were incorporated into diesel fuel with the aim of reducing harmful exhaust gasses of Diesel engine, di-tertbutyl peroxide as cetane improver in a ratio of 1% was added into mixture fuels in order to reduce negative effects of methanol on engine performance parameters, and isobutanol of a ratio of 1% was used as additive for preventing phase separation of all mixtures. As results of experiments conducted on a single cylinder and direct injection Diesel engine, methanol caused the increase of NOx emission while reducing CO, HC, CO2, and smoke opacity emissions. It also reduced torque and power values, and increased brake specific fuel consumption values. Cetane improver increased torque and power values slightly compared to methanol-mixed fuels, and reduced brake specific fuel consumption values. It also affected exhaust emission values positively, excluding smoke opacity. Increase of injector injection pressure affected performances of methanol-mixed fuels positively. It also increased injection pressure and NOx emissions, while reducing other exhaust emissions.

APPLICATION ON OXYGENATED FUEL OF MONO-ETHER GROUP IN AN IDI DIESEL ENGINE

2012 ◽  
Vol 06 ◽  
pp. 425-430
Author(s):  
HYUNG-GON KIM ◽  
SEUNG-HUN CHOI ◽  
YOUNG-TAIG OH
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Exhaust Emission ◽  
Emission Characteristics ◽  
Butyl Ether ◽  
Ether Group ◽  
Oxygenated Fuel ◽  
Effect Of Oxygen ◽  
Gas Recirculation

Effect of oxygen components of fuels on exhaust emissions has been investigated by applying an indirect injection (IDI) diesel engine. This research analyzed variation and/or difference of the engine performance and exhaust emission characteristics of the IDI diesel engine by fueling the commercial diesel fuel and four different mixed ratios of oxygenated blended fuels. Effect of the exhaust gas recirculation (EGR) method was analyzed on the NOx emission characteristics. Ethylene glycol mono-n-butyl ether (EGBE) contains 27% of oxygen components in itself, and it is a kind of effective oxygenated fuel of mono-ether group. Smoke emission from the EGBE was reduced remarkably relative to the commercial diesel fuel. The EGBE can supply oxygen components sufficiently at higher diesel engine loads and speeds. It was found that a simultaneous reduction of the smoke and the NOx was achieved with the oxygenated fuel (10 vol-%) and the cooled EGR method (10%).

Exhaust Emission Characteristics of a Three-Wheeler Auto Diesel Engine Fueled with Pongamia, Mahua and Jatropha Biodiesels

2019 ◽  
Vol 13 ◽  
Author(s):  
Bobbili Prasadarao ◽  
Aditya Kolakoti ◽  
Pudi Sekhar
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Diesel Fuel ◽  
Edible Oils ◽  
Cetane Number ◽  
Alternative Fuel ◽  
Exhaust Emissions ◽  
International Standards ◽  
Exhaust Emission ◽  
Emission Characteristics

: This paper presents the production of biodiesel from three different non edible oils of Pongamia, Mahua and Jatropha as an alternative fuel for diesel engine. Biodiesel is produced by followed transesterification process, using catalyst sodium hydroxide (NaOH) and methyl alcohol (CH3OH). A single cylinder four stroke three-wheeler auto diesel engine is used to evaluate the exhaust emission characteristics at a constant speed of 1500rpm with varying loads. Diesel as a reference fuel and cent percent of Pongamia Methyl Ester (PME), Mahua Methyl Ester (MME) and Jatropha Methyl Ester (JME) are used as an alternative fuel. The physicochemical properties of biodiesels are within the limits of international standards (ASTM D6751) noticeably. The results of tested biodiesels offer low exhaust emissions compared to diesel fuel, owing to presence of molecular oxygen and high cetane number. At maximum load the NOx emission reduced by 18.41% for JME, 17.46% for MME and 7.61% for PME. Low levels of CO emissions are recorded for JME (66%) followed by MME (33%) and PME (22%). Unburnt hydrocarbon emissions were reduced by 85.75% for JME and MME, for PME 14.28% reduction is observed. Exhaust smoke emissions are also reduced for PME and MME by 18.84%, for JME 14.49%. As a conclusion, it is observed that all the methyl esters exhibit significant reduction in harmful exhaust emissions compared to diesel fuel and JME is noted as a better choice.

Influence of Dual Fuel Twin Injection on Diesel Engine Combustion and Emission Characteristics

2013 ◽  
Vol 768 ◽  
pp. 206-212 ◽  
Author(s):  
K. Senthil Kumar ◽  
R. Thundil Karuppa Raj
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Release Rate ◽  
Exhaust Emission ◽  
Dual Fuel ◽  
Emission Characteristics ◽  
Pilot Injection ◽  
Crank Angle ◽  
Engine Combustion ◽  
Pilot Fuel

The objective of this study is to investigate the feasibility of two-stage injection on combustion and exhaust emission characteristics in diesel (main fuel) ethanol (pilot fuel) fuelled single cylinder diesel engine. The pressure crank angle and net heat release rate diagrams revealed that increase in the ethanol pilot quantity causes an increase in the ignition delay in the pilot combustion and hence the main combustion due to diesel fuel is slightly influenced by the ethanol pilot fuel. The increase in the pilot injection decreases the NOx considerably. The concentration of soot emissions also decreases with increase in pilot injection. The CO emissions increases with increase in pilot injection and a slight increase in HC emission is observed.

scholarly journals ANALYSIS OF PERFORMANCE AND EMISSION CHARACTERISTICS OF A DIESEL ENGINE FUELLED WITH BIODIESEL

2017 ◽  
Vol 46 (1) ◽  
pp. 16-21
Author(s):  
R. Sundara Raman ◽  
G. Sankara Narayanan ◽  
N. Manoharan ◽  
S. Sendilvelan
Keyword(s):  
Diesel Engine ◽  
Rice Bran ◽  
Diesel Fuel ◽  
Alternative Fuels ◽  
Rice Bran Oil ◽  
Transport Sector ◽  
Exhaust Emission ◽  
Emission Characteristics ◽  
Particulate Emission ◽  
Promising Alternative

The rapid depletion in world petroleum reserves and uncertainty in petroleum supply due to political and economical reasons along with the sharp escalation in the petroleum prices have simulated the search for alternatives to petroleum based fuels especially diesel and gasoline. Moreover, bulks of petroleum fuels are being consumed by agriculture and transport sector for which diesel engine happens to be the prime mover. Though there are wide varieties of alternative fuels available the research has not yet provided the right renewable fuel to replace diesel. Vegetable oil due to their properties being close to diesel fuel may be a promising alternative for diesel engines. Due to their high viscosity, they cannot be directly used in a diesel engine. Transesterification is one method by which viscosity could be drastically reduced and the fuel could be adopted for use in diesel engine. Present investigation focuses on use of Rice Bran Oil in Diesel engine. Performance and exhaust emission characteristics of the engine have been evaluated. Esterified Rice Bran Oil has exhibited performance very close to that of diesel fuel. In the present work it is observed that, the NOX and unburned hydrocarbon emission decreases and carbon monoxide, particulate emission and smoke intensity increases with the use of biodiesel in diesel engine. When compared to non-esterified Rice Bran Oil, esterified Rice Bran Oil emits less smoke and therefore be regarded as an environment friendly fuel.

ANALYSIS OF OXYGENATED COMPONENT (BUTYL ETHER) AND EGR EFFECT ON A DIESEL ENGINE

2010 ◽  
Vol 24 (15n16) ◽  
pp. 2844-2849 ◽  
Author(s):  
SEUNG-HUN CHOI ◽  
YOUNG-TAIG OH
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Specific Energy Consumption ◽  
Engine Performance ◽  
Nox Emission ◽  
Exhaust Emission ◽  
Engine Fuel ◽  
Butyl Ether ◽  
Significant Difference ◽  
Blended Fuel

Potential possibility of the butyl ether (BE, oxygenates of di-ether group) was analyzed as an additives for a naturally aspirated direct injection diesel engine fuel. Engine performance and exhaust emission characteristics were analyzed by applying the commercial diesel fuel and oxygenates additives blended diesel fuels. Smoke emission decreased approximately 26% by applying the blended fuel (diesel fuel 80 vol-% + BE 20vol-%) at the engine speed of 25,000 rpm and with full engine load compared to the diesel fuel. There was none significant difference between the blended fuel and the diesel fuel on the power, torque, and brake specific energy consumption rate of the diesel engine. But, NOx emission from the blended fuel was higher than the commercial diesel fuel. As a counter plan, the EGR method was employed to reduce the NOx . Simultaneous reduction of the smoke and the NOx emission from the diesel engine was achieved by applying the BE blended fuel and the cooled EGR method.

scholarly journals Evaluation of Diesel Engine Performance and Exhaust Emission Characteristics Using Waste Cooking Oil

2015 ◽  
Vol 773-774 ◽  
pp. 425-429 ◽  
Author(s):  
Nur Atiqah Ramlan ◽  
Abdul Adam Abdullah ◽  
Mohd Herzwan Hamzah ◽  
Nur Fauziah Jaharudin ◽  
Rizalman Mamat
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Fossil Fuels ◽  
Engine Speed ◽  
Engine Performance ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Exhaust Emission ◽  
Cooking Oil ◽  
Conventional Diesel Fuel

The depletion of fossil fuels as well as the rises of greenhouse gases had caused most government worldwide to follow the international energy policies for the use of biodiesel. One of the economical sources for biodiesel production is waste cooking oil. The use of waste cooking oil is more sustainable if they can perform similarly to conventional diesel fuel. This paper deals with the experimental study carried out to evaluate the engine performance and exhaust emission of diesel engine operated by biodiesel from waste cooking oil at various engine speed. The biodiesel used are known as B5, which contains of 5% of waste cooking oil and 95% of diesel fuel. The other one is B20, which contains of 20% of waste cooking oil plus 80% of diesel. Diesel was used as a comparison purposes. The results show that power and torque for B5 give the closest trend to diesel. In terms of heat release, diesel still dominates the highest value compared to B5 and B20. For exhaust emission, B5 and B20 showed improvement in the reduction of NOx and PM.

A novel method based on gas microsensors to analyze diesel engine oil contaminated by diluent unburned diesel fuel

2006 ◽  
Author(s):  
S. Capone ◽  
M. Epifani ◽  
L. Francioso ◽  
D.S. Presicce ◽  
P. Siciliano ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Engine Oil ◽  
Novel Method
Sign in / Sign up

Export Citation Format

Share Document