Predictive Combustion and Emissions Simulations for a High Performance Diesel Engine Using a Detailed Fuel Combustion Model

2014 ◽  
Author(s):  
Karthik Puduppakkam ◽  
Chitralkumar Naik ◽  
Ellen Meeks ◽  
Christian Krenn ◽  
Roswitha Kroiss ◽  
...  
Keyword(s):  
Diesel Engine ◽  
High Performance ◽  
Fuel Combustion ◽  
Combustion Model

scholarly journals A Multicomponent Blend as a Diesel Fuel Surrogate for Compression Ignition Engine Applications

2015 ◽  
Vol 137 (11) ◽  
Author(s):  
Yuanjiang Pei ◽  
Marco Mehl ◽  
Wei Liu ◽  
Tianfeng Lu ◽  
William J. Pitz ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Flow Reactor ◽  
Expert Knowledge ◽  
Combustion Model ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Combined Mechanism ◽  
Fuel Surrogate ◽  
Skeletal Mechanism

A mixture of n-dodecane and m-xylene is investigated as a diesel fuel surrogate for compression ignition (CI) engine applications. Compared to neat n-dodecane, this binary mixture is more representative of diesel fuel because it contains an alkyl-benzene which represents an important chemical class present in diesel fuels. A detailed multicomponent mechanism for n-dodecane and m-xylene was developed by combining a previously developed n-dodecane mechanism with a recently developed mechanism for xylenes. The xylene mechanism is shown to reproduce experimental ignition data from a rapid compression machine (RCM) and shock tube (ST), speciation data from the jet stirred reactor and flame speed data. This combined mechanism was validated by comparing predictions from the model with experimental data for ignition in STs and for reactivity in a flow reactor. The combined mechanism, consisting of 2885 species and 11,754 reactions, was reduced to a skeletal mechanism consisting 163 species and 887 reactions for 3D diesel engine simulations. The mechanism reduction was performed using directed relation graph (DRG) with expert knowledge (DRG-X) and DRG-aided sensitivity analysis (DRGASA) at a fixed fuel composition of 77% of n-dodecane and 23% m-xylene by volume. The sample space for the reduction covered pressure of 1–80 bar, equivalence ratio of 0.5–2.0, and initial temperature of 700–1600 K for ignition. The skeletal mechanism was compared with the detailed mechanism for ignition and flow reactor predictions. Finally, the skeletal mechanism was validated against a spray flame dataset under diesel engine conditions documented on the engine combustion network (ECN) website. These multidimensional simulations were performed using a representative interactive flame (RIF) turbulent combustion model. Encouraging results were obtained compared to the experiments with regard to the predictions of ignition delay and lift-off length at different ambient temperatures.

Particulate Filter Design for High Performance Diesel Engine Application

2008 ◽  
Vol 1 (1) ◽  
pp. 1307-1312
Author(s):  
Cheng G. Li ◽  
Hein Koelman ◽  
Ravi Ramanathan ◽  
Ulrich Baretzky ◽  
Gunter Forbriger ◽  
...  
Keyword(s):  
Diesel Engine ◽  
High Performance ◽  
Filter Design ◽  
Particulate Filter

Simulation of a Single Cylinder Diesel Engine Under Cold Start Conditions Using Simulink

2000 ◽  
Vol 123 (1) ◽  
pp. 117-124 ◽  
Author(s):  
H.-Q. Liu ◽  
N. G. Chalhoub ◽  
N. Henein
Keyword(s):  
Diesel Engine ◽  
Direct Injection ◽  
Cold Start ◽  
Operating Conditions ◽  
Combustion Model ◽  
Nonlinear Dynamic Model ◽  
Single Cylinder ◽  
Engine Model ◽  
Simulink Model ◽  
Engine Components

A nonlinear dynamic model is developed in this study to simulate the overall performance of a naturally aspirated, single cylinder, four-stroke, direct injection diesel engine under cold start and fully warmed-up conditions. The model considers the filling and emptying processes of the cylinder, blowby, intake, and exhaust manifolds. A single zone combustion model is implemented and the heat transfer in the cylinder, intake, and exhaust manifolds are accounted for. Moreover, the derivations include the dynamics of the crank-slider mechanism and employ an empirical model to estimate the instantaneous frictional losses in different engine components. The formulation is coded in modular form whereby each module, which represents a single process in the engine, is introduced as a single block in an overall Simulink engine model. The numerical accuracy of the Simulink model is verified by comparing its results to those generated by integrating the engine formulation using IMSL stiff integration routines. The engine model is validated by the close match between the predicted and measured cylinder gas pressure and engine instantaneous speed under motoring, steady-state, and transient cold start operating conditions.

Effects of the Injection Parameters on the Emissions of a Heavy Duty Diesel Engine

2009 ◽  
Author(s):  
M. Yılmaz ◽  
M. Zafer Gul ◽  
Y. Yukselenturk ◽  
B. Akay ◽  
H. Koten
Keyword(s):  
Diesel Engine ◽  
Direct Injection ◽  
Combustion Process ◽  
Design Parameters ◽  
Combustion Model ◽  
Particulate Emissions ◽  
Multiphase Model ◽  
Heavy Duty ◽  
Flow Development ◽  
Air Motion

It is estimated by the experts in the automotive industry that diesel engines on the transport market should increase within the years to come due to their high thermal efficiency coupled with low carbon dioxide (CO2) emissions, provided their nitrogen oxides (NOx) and particulate emissions are reduced. At present, adequate after-treatments, NOx and particulates matter (PM) traps are developed and industrialized with still concerns about fuel economy, robustness, sensitivity to fuel sulfur and cost because of their complex and sophisticated control strategy. New combustion processes focused on clean diesel combustion are investigated for their potential to achieve near zero particulate and NOx emissions. Their main drawbacks are increased level of unburned hydrocarbons (HC) and carbon monoxide (CO) emissions, combustion control at high load and limited operating range and power output. In this work, cold flow simulations for a single cylinder of a nine-liter (6 cylinder × 1.5 lt.) diesel engine have been performed to find out flow development and turbulence generation in the piston-cylinder assembly. In this study, the goal is to understand the flow field and the combustion process in order to be able to suggest some improvements on the in-cylinder design of an engine. Therefore combustion simulations of the engine have been performed to find out flow development and emission generation in the cylinder. Moreover, the interaction of air motion with high-pressure fuel spray injected directly into the cylinder has also been carried out. A Lagrangian multiphase model has been applied to the in-cylinder spray-air motion interaction in a heavy-duty CI engine under direct injection conditions. A comprehensive model for atomization of liquid sprays under high injection pressures has been employed. The combustion is modeled via a new combustion model ECFM-3Z (Extended Coherent Flame Model) developed at IFP. Finally, a calculation on an engine configuration with compression, spray injection and combustion in a direct injection Diesel engine is presented. Further investigation has also been performed in-cylinder design parameters in a DI diesel engine that result in low emissions by effect of high turbulence level. The results are widely in agreement qualitatively with the previous experimental and computational studies in the literature.

scholarly journals Simulation of performance and nitrogen oxide formation of a hydrogen-enriched diesel engine with the steam injection method

2015 ◽  
Vol 19 (6) ◽  
pp. 1985-1994 ◽  
Author(s):  
Guven Gonca ◽  
Bahri Sahin
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Steam Injection ◽  
Combustion Model ◽  
Enrichment Method ◽  
Injection Method ◽  
Positive Effects ◽  
Effective Efficiency ◽  
Hydrogen Enrichment ◽  
No Emissions

In the present study, steam injection method (SIM) is implemented to a hydrogen-enriched diesel engine in order to improve the levels of performance and NO emissions. As hydrogen enrichment method increases effective efficiency, NO emissions could be increased. However, the SIM is used to control NO emissions and improve the engine performance. Due to these positive effects, hydrogen enrichment and the SIM)are applied into a diesel engine by using a two-zone combustion model for30% hydrogen enrichment of the fuel volume and 20% steam ratio of the fuel mass at full load conditions. The results obtained are compared with conventional diesel engine (D), steam injected diesel engine (D+S20), hydrogen-enriched diesel engine (D+H30) and hydrogen-enriched diesel engine with steam injection (D+H30+S20) in terms of performance and NO emissions. In the results, the effective efficiency and effective power improve up to 22.8% and %3.1, as NO emissions decrease up to 22.1%. Hence, the hydrogen enrichment with steam injection method is more environmentally friendly with better performance.

Progress on the Investigation of Coal-Water Slurry Fuel Combustion in a Medium-Speed Diesel Engine: Part 5—Combustion Studies

1992 ◽  
Vol 114 (3) ◽  
pp. 515-521 ◽  
Author(s):  
B. D. Hsu ◽  
G. L. Confer ◽  
Z. J. Shen
Keyword(s):  
Diesel Engine ◽  
Fuel Injection ◽  
Injection Pressure ◽  
Combustion Efficiency ◽  
Fuel Combustion ◽  
Injection Timing ◽  
Water Slurry ◽  
Medium Speed ◽  
Engine Part ◽  
Coal Water Slurry

In the GE 7FDL single-cylinder research diesel engine, coal-water slurry (CWS) fuel combustion optimization studies were conducted using electronically controlled CWS and pilot accumulator injectors. The most important performance parameters of peak firing pressure, combustion efficiency (coal burnout), and specific fuel comsumption were evaluated in relationship to CWS and pilot injection timing, CWS injector hole size, shape, and number, CWS fuel injection spray angles and injection pressure. Heat release diagrams, as well as exhaust samples (gaseous and particulate), were analyzed for each case. Interesting effects of fuel spray impingement and CWS fuel “Delayed Ignition” were observed. With the engine operating at 2.0 MPa IMEP and 1050 rpm, it was able to obtain over 99.5 percent combustion efficiency while holding the cylinder firing pressure below 17 MPa and thermal efficiency equivalent to diesel fuel operation.

A numerical and experimental assessment of a coated diesel engine powered by high-performance nano biofuel

2018 ◽  
Vol 171 ◽  
pp. 815-824 ◽  
Author(s):  
B. Dhinesh ◽  
Y. Maria Ambrose Raj ◽  
C. Kalaiselvan ◽  
R. KrishnaMoorthy
Keyword(s):  
Diesel Engine ◽  
High Performance ◽  
Experimental Assessment
Sign in / Sign up

Export Citation Format

Share Document