Development of ILSAC GF-5 0W-20 Fuel Economy Gasoline Engine Oil

2012 ◽  
Author(s):  
Kosuke Fujimoto ◽  
Minoru Yamashita ◽  
Toyoharu Kaneko ◽  
Satoshi Hirano ◽  
Yusuke Ito ◽  
...  
Keyword(s):  
Fuel Economy ◽  
Gasoline Engine ◽  
Engine Oil

0W-16 Fuel Economy Gasoline Engine Oil Compatible with Low Speed Pre-Ignition Performance

2017 ◽  
Vol 10 (3) ◽  
Author(s):  
Hong Liu ◽  
Jiajia Jin ◽  
Hongyu Li ◽  
Kazuo Yamamori ◽  
Toyoharu Kaneko ◽  
...  
Keyword(s):  
Fuel Economy ◽  
Gasoline Engine ◽  
Engine Oil ◽  
Low Speed

Tumble Flow Measurements Using Three Different Methods and Its Effects on Fuel Economy and Emissions

2006 ◽  
Author(s):  
Myoungjin Kim ◽  
Sihun Lee ◽  
Wootae Kim
Keyword(s):  
Fuel Economy ◽  
High Performance ◽  
Gasoline Engine ◽  
Exhaust Emissions ◽  
Combustion Stability ◽  
Lean Burn ◽  
Flow Measurements ◽  
Part Load ◽  
Gasoline Engines ◽  
Dynamometer Test

In-cylinder flows such as tumble and swirl have an important role on the engine combustion efficiencies and emission formations. In particular, the tumble flow, which is dominant in-cylinder flow in current high performance gasoline engines, has an important effect on the fuel consumptions and exhaust emissions under part load conditions. Therefore, it is important to know the effect of the tumble ratio on the part load performance and optimize the tumble ratio of a gasoline engine for better fuel economy and exhaust emissions. First step in optimizing a tumble flow is to measure a tumble ratio accurately. In this research the tumble flow was measured, compared and correlated using three different measurement methods: steady flow rig, 2-Dimensional PIV, and 3-Dimensional PTV. Engine dynamometer test was performed to find out the effect of the tumble ratio on the part load performance. Dynamometer test results of high tumble ratio engine showed faster combustion speed, retarded MBT timing, higher exhaust emissions, and a better lean burn combustion stability. Lean limit of the baseline engine was expanded from A/F=18:1 to A/F=21:1 by increasing a tumble ratio using MTV.

Economy and emission characteristics of the optimal dilution strategy in lean combustion based on GDI gasoline engine equipped with prechamber

2021 ◽  
Vol 13 (12) ◽  
pp. 168781402110381
Author(s):  
Li Wang ◽  
Zhaoming Huang ◽  
Wang Tao ◽  
Kai Shen ◽  
Weiguo Chen
Keyword(s):  
Fuel Economy ◽  
Gasoline Engine ◽  
Direct Injection ◽  
Engine Performance ◽  
Gasoline Direct Injection ◽  
Dilution Ratio ◽  
Lean Combustion ◽  
Excess Air ◽  
Combustion Phase ◽  
Hc Emissions

EGR and excess-air dilution have been investigated in a 1.5 L four cylinders gasoline direct injection (GDI) turbocharged engine equipped with prechamber. The influences of the two different dilution technologies on the engine performance are explored. The results show that at 2400 rpm and 12 bar, EGR dilution can adopt more aggressive ignition advanced angle to achieve optimal combustion phasing. However, excess-air dilution has greater fuel economy than that of EGR dilution owing to larger in-cylinder polytropic exponent. As for prechamber, when dilution ratio is greater than 37.1%, the combustion phase is advanced, resulting in fuel economy improving. Meanwhile, only when the dilution ratio is under 36.2%, the HC emissions of excess-air dilution are lower than the original engine. With the increase of dilution ratio, the CO emissions decrease continuously. The NOX emissions of both dilution technologies are 11% of those of the original engine. Excess-air dilution has better fuel economy and very low CO emissions. EGR dilution can effectively reduce NOX emissions, but increase HC emissions. Compared with spark plug ignition, the pre chamber ignition has lower HC, CO emissions, and higher NO emissions. At part load, the pre-chamber ignition reduces NOX emissions to 49 ppm.

Sign in / Sign up

Export Citation Format

Share Document