Development and Commissioning of a Linear Compressor Cascade Rig for Ice Crystal Research

2011 ◽  
Author(s):  
Daniel C. Knezevici ◽  
Dan Fuleki ◽  
James MacLeod
Keyword(s):  
Ice Crystal ◽  
Compressor Cascade ◽  
Linear Compressor ◽  
Linear Compressor Cascade

Multiscale Partially Averaged Navier Stokes Approach for the Prediction of Flow in Linear Compressor Cascade With Moving Casing

2011 ◽  
Author(s):  
Domenico Borello ◽  
Giovanni Delibra ◽  
Franco Rispoli
Keyword(s):  
Turbulence Models ◽  
Navier Stokes ◽  
Test Case ◽  
Compressor Cascade ◽  
Preliminary Assessment ◽  
Linear Compressor ◽  
Tip Leakage ◽  
Experimental Campaign ◽  
Elliptic Relaxation ◽  
Linear Compressor Cascade

In this paper we present an innovative Partially Averaged Navier Stokes (PANS) approach for the simulation of turbomachinery flows. The elliptic relaxation k-ε-ζ-f model was used as baseline Unsteady Reynolds Averaged Navier Stokes (URANS) model for the derivation of the PANS formulation. The well established T-FlowS unstructured finite volume in-house code was used for the computations. A preliminary assessment of the developed formulation was carried out on a 2D hill flow that represents a very demanding test case for turbulence models. The turbomachinery flow here investigated reproduces the experimental campaign carried out at Virginia Tech on a linear compressor cascade with tip leakage. Their measurements were used for comparisons with numerical results. The predictive capabilities of the model were assessed through the analysis of the flow field. Then an investigation of the blade passage, where experiments were not available, was carried out to detect the main loss sources.

Numerical Investigation of Intermittent Corner Separation in a Linear Compressor Cascade

2016 ◽  
Author(s):  
Wei Ma ◽  
Feng Gao ◽  
Xavier Ottavy ◽  
Lipeng Lu ◽  
A. J. Wang
Keyword(s):  
Flow Field ◽  
Large Scale ◽  
Leading Edge ◽  
Suction Side ◽  
Detached Eddy Simulation ◽  
Compressor Cascade ◽  
Linear Compressor ◽  
Corner Separation ◽  
Eddy Simulation ◽  
Linear Compressor Cascade

Recently bimodal phenomenon in corner separation has been found by Ma et al. (Experiments in Fluids, 2013, doi:10.1007/s00348-013-1546-y). Through detailed and accurate experimental results of the velocity flow field in a linear compressor cascade, they discovered two aperiodic modes exist in the corner separation of the compressor cascade. This phenomenon reflects the flow in corner separation is high intermittent, and large-scale coherent structures corresponding to two modes exist in the flow field of corner separation. However the generation mechanism of the bimodal phenomenon in corner separation is still unclear and thus needs to be studied further. In order to obtain instantaneous flow field with different unsteadiness and thus to analyse the mechanisms of bimodal phenomenon in corner separation, in this paper detached-eddy simulation (DES) is used to simulate the flow field in the linear compressor cascade where bimodal phenomenon has been found in previous experiment. DES in this paper successfully captures the bimodal phenomenon in the linear compressor cascade found in experiment, including the locations of bimodal points and the development of bimodal points along a line that normal to the blade suction side. We infer that the bimodal phenomenon in the corner separation is induced by the strong interaction between the following two facts. The first is the unsteady upstream flow nearby the leading edge whose angle and magnitude fluctuate simultaneously and significantly. The second is the high unsteady separation in the corner region.

scholarly journals Tip Leakage Flow in Linear Compressor Cascade

1993 ◽  
Author(s):  
S. Kang ◽  
C. Hirsch
Keyword(s):  
Design Flow ◽  
Tip Clearance ◽  
Leakage Flow ◽  
Compressor Cascade ◽  
Tip Leakage Flow ◽  
Linear Compressor ◽  
Tip Leakage ◽  
Flow Mixing ◽  
Internal Loss ◽  
Linear Compressor Cascade

Tip leakage flow in a linear compressor cascade of NACA 65-1810 profiles is investigated, for tip clearance levels of 1.0, 2.0 and 3.25 percent of chord at design and off-design flow conditions. Data, velocity and pressures, are collected from three transverse sections inside tip clearance and sixteen sections within flow passage. Tip separation vortex influence is identified from the data. Leakage flow mixing is clearly present inside the clearance and has a significant influence on the internal loss.

Non-Axisymmetric Endwall Contouring in a Linear Compressor Cascade

2020 ◽  
Author(s):  
Yuchen Ma ◽  
Jinfang Teng ◽  
Mingmin Zhu ◽  
Xiaoqing Qiang
Keyword(s):  
Pressure Loss ◽  
Reverse Flow ◽  
Measurement Techniques ◽  
Suction Side ◽  
Limiting Factor ◽  
Blade Surface ◽  
Compressor Cascade ◽  
Linear Compressor ◽  
Endwall Contouring ◽  
Linear Compressor Cascade

Abstract Modern axial compressors are designed to be highly loaded in terms of aerodynamics, which can lead to challenges of increasing the compressor efficiency. Losses associated with secondary flow effects are well known to be the major limiting factor of improving the compressor performance. In this study, non-axisymmetric endwall contouring in a linear compressor cascade was generated through the optimization process. Combined with numerical simulation, wind tunnel tests on linear cascades with flat and contoured endwall were performed with various measurement techniques at the design and off-design conditions. The simulation results show that optimal endwall design can provide 3.08% reduction of the total pressure loss at the design condition. The reduction of pressure loss obtained is mainly below 24%span with the size of the high loss region being effectively reduced. At off-design condition, the numerical benefit of the endwall contouring is found less pronounced. The discrepancy is spotted between simulation and experiments. The experimental pressure loss reduction is mainly below 18% at ADP. And the pressure loss for the CEW increases greatly at offdesign condition in experiments. Flow patterns revealed by numerical simulations show that the separation on the blade surface is mitigated with focus point disappearing, and reverse flow on the endwall near the suction side corner is moved away from the blade surface. CFD analysis indicates that the altered pressure distribution on the endwall accelerates the flow at the suction side corner and moves the reverse flow core further downstream. The weakened interaction between the corner vortex and tornado-like vortex from the endwall near the suction side corner is the main control mechanism of the CEW. The performance improvement in the linear compressor is mainly gained from it.

scholarly journals Numerical Simulation of 3D Viscous Flow in a Linear Compressor Cascade With Tip Clearance

1994 ◽  
Author(s):  
Shun Kang ◽  
Charles Hirsch
Keyword(s):  
Viscous Flow ◽  
Flow Structure ◽  
Leading Edge ◽  
Secondary Flows ◽  
Tip Clearance ◽  
Flow Coefficient ◽  
Compressor Cascade ◽  
Tip Leakage Flow ◽  
Linear Compressor ◽  
Linear Compressor Cascade

A Navier-Stokes solver is applied to investigate the 3D viscous flow in a low speed linear compressor cascade with tip clearance at design and off-design conditions with two different meshes. The algebraic turbulence model of Baldwin-Lomax is used for closure. Relative motion between the blades and wall is simulated for one flow coefficient. Comparisons with experimental data, including flow structure, static and total pressures, velocity profiles, secondary flows and vorticity, are presented for the stationary wall case. It is shown that the code predicts well the flow structure observed in experiments and shows the details of the tip leakage flow and the leading edge horseshoe vortex.

Sign in / Sign up

Export Citation Format

Share Document