Multiple Injection Strategies for Improved Combustion Stability under Stratified Part Load Conditions in a Spray Guided Gasoline Direct Injection (SGDI) Engine

2011 ◽  
Author(s):  
Lars Schmidt ◽  
Justin Seabrook ◽  
John Stokes ◽  
Mohd Faizan Ahmad Zuhdi ◽  
Steven Begg ◽  
...  
Keyword(s):  
Direct Injection ◽  
Gasoline Direct Injection ◽  
Combustion Stability ◽  
Multiple Injection ◽  
Part Load ◽  
Load Conditions ◽  
Injection Strategies

scholarly journals Extending Lean and EGR-Dilute Operating Limits of a Modern GDI Engine Using a Low-Energy Transient Plasma Ignition System

2015 ◽  
Author(s):  
James Sevik ◽  
Thomas Wallner ◽  
Michael Pamminger ◽  
Riccardo Scarcelli ◽  
Dan Singleton ◽  
...  
Keyword(s):  
Direct Injection ◽  
Load Condition ◽  
Operating Conditions ◽  
Low Energy ◽  
Gasoline Direct Injection ◽  
Combustion Stability ◽  
Ignition System ◽  
Part Load ◽  
Plasma Ignition ◽  
Transient Plasma

The efficiency improvement and emissions reduction potential of lean and EGR dilute operation of spark-ignition gasoline engines is well understood and documented. However, dilute operation is generally limited by deteriorating combustion stability with increasing inert gas levels. The combustion stability decreases due to reduced mixture flame speeds resulting in significantly increased combustion initiation periods and burn durations. A study was designed and executed to evaluate the potential to extend lean and EGR-dilute limits using a low-energy transient plasma ignition system. The low-energy transient plasma was generated by nano-second pulses and its performance compared to a conventional transistorized coil ignition system operated on an automotive, gasoline direct injection (GDI) single-cylinder research engine. The experimental assessment was focused on steady-state experiments at the part load condition of 1500 rpm 5.6 bar IMEP, where dilution tolerance is particularly critical to improving efficiency and emissions performance. Experimental results suggest that the energy delivery process of the low-energy transient plasma ignition system significantly improves part load dilution tolerance by reducing the early flame development period. Statistical analysis of relevant combustion metrics was performed in order to further investigate the effects of the advanced ignition system on combustion stability. Results confirm that at select operating conditions EGR tolerance and lean limit could be improved by as much as 20% (from 22.7 to 27.1% EGR) and nearly 10% (from λ=1.55 to 1.7) with the low-energy transient plasma ignition system.

Influence of fuel injection strategies on efficiency and particulate emissions of gasoline and ethanol blends in a turbocharged multi-cylinder direct injection engine

2019 ◽  
Vol 22 (1) ◽  
pp. 152-164 ◽  
Author(s):  
Ripudaman Singh ◽  
Taehoon Han ◽  
Mohammad Fatouraie ◽  
Andrew Mansfield ◽  
Margaret Wooldridge ◽  
...  
Keyword(s):  
Thermal Efficiency ◽  
Fuel Injection ◽  
Direct Injection ◽  
Injection Timing ◽  
Multiple Injection ◽  
Fuel Mass ◽  
Direct Injection Engine ◽  
Fuel Blends ◽  
Ethanol Blends ◽  
Injection Strategies

The effects of a broad range of fuel injection strategies on thermal efficiency and engine-out emissions (CO, total hydrocarbons, NOx and particulate number) were studied for gasoline and ethanol fuel blends. A state-of-the-art production multi-cylinder turbocharged gasoline direct injection engine equipped with piezoelectric injectors was used to study fuels and fueling strategies not previously considered in the literature. A large parametric space was considered including up to four fuel injection events with variable injection timing and variable fuel mass in each injection event. Fuel blends of E30 (30% by volume ethanol) and E85 (85% by volume ethanol) were compared with baseline E0 (reference grade gasoline). The engine was operated over a range of loads with intake manifold absolute pressure from 800 to 1200 mbar. A combined application of ethanol blends with a multiple injection strategy yielded considerable improvement in engine-out particulate and gaseous emissions while maintaining or slightly improving engine brake thermal efficiency. The weighted injection spread parameter defined in this study, combined with the weighted center of injection timing defined in the previous literature, was found well suited to characterize multiple injection strategies, including the effects of the number of injections, fuel mass in each injection and the dwell time between injections.

Extending Lean and Exhaust Gas Recirculation-Dilute Operating Limits of a Modern Gasoline Direct-Injection Engine Using a Low-Energy Transient Plasma Ignition System

2016 ◽  
Vol 138 (11) ◽  
Author(s):  
James Sevik ◽  
Thomas Wallner ◽  
Michael Pamminger ◽  
Riccardo Scarcelli ◽  
Dan Singleton ◽  
...  
Keyword(s):  
Direct Injection ◽  
Exhaust Gas Recirculation ◽  
Low Energy ◽  
Gasoline Direct Injection ◽  
Combustion Stability ◽  
Exhaust Gas ◽  
Ignition System ◽  
Plasma Ignition ◽  
Gas Recirculation ◽  
Transient Plasma

The efficiency improvement and emissions reduction potential of lean and exhaust gas recirculation (EGR)-dilute operation of spark-ignition gasoline engines is well understood and documented. However, dilute operation is generally limited by deteriorating combustion stability with increasing inert gas levels. The combustion stability decreases due to reduced mixture flame speeds resulting in significantly increased combustion initiation periods and burn durations. A study was designed and executed to evaluate the potential to extend lean and EGR-dilute limits using a low-energy transient plasma ignition system. The low-energy transient plasma was generated by nanosecond pulses and its performance compared to a conventional transistorized coil ignition (TCI) system operated on an automotive, gasoline direct-injection (GDI) single-cylinder research engine. The experimental assessment was focused on steady-state experiments at the part load condition of 1500 rpm 5.6 bar indicated mean effective pressure (IMEP), where dilution tolerance is particularly critical to improving efficiency and emission performance. Experimental results suggest that the energy delivery process of the low-energy transient plasma ignition system significantly improves part load dilution tolerance by reducing the early flame development period. Statistical analysis of relevant combustion metrics was performed in order to further investigate the effects of the advanced ignition system on combustion stability. Results confirm that at select operating conditions EGR tolerance and lean limit could be improved by as much as 20% (from 22.7 to 27.1% EGR) and nearly 10% (from λ = 1.55 to 1.7) with the low-energy transient plasma ignition system.

Investigation of Injection Strategies to Improve High Efficiency RCCI Combustion With Diesel and Gasoline Direct Injection

2012 ◽  
Author(s):  
Martin L. Wissink ◽  
Jae H. Lim ◽  
Derek A. Splitter ◽  
Reed M. Hanson ◽  
Rolf D. Reitz
Keyword(s):  
High Efficiency ◽  
Direct Injection ◽  
High Reactivity ◽  
Gasoline Direct Injection ◽  
Cylinder Wall ◽  
Nox Emissions ◽  
Heavy Duty ◽  
Fuel Vaporization ◽  
Heavy Duty Diesel ◽  
Injection Strategies

Experiments were performed to investigate injection strategies for improving engine-out emissions of RCCI combustion in a heavy-duty diesel engine. Previous studies of RCCI combustion using port-injected low-reactivity fuel (e.g., gasoline or iso-octane) and direct-injected high-reactivity fuel (e.g., diesel or n-heptane) have reported greater than 56% gross indicated thermal efficiency while meeting the EPA 2010 heavy-duty PM and NOx emissions regulations in-cylinder. However, CO and UHC emissions were higher than in diesel combustion. This increase is thought to be caused by crevice flows of trapped low-reactivity fuel and lower cylinder wall temperatures. In the present study, both the low- and high-reactivity fuels were direct-injected, enabling more precise targeting of the low-reactivity fuel as well as independent stratification of equivalence ratio and reactivity. Experiments with direct-injection of both gasoline and diesel were conducted at 9 bar IMEP and compared to results from experiments with port-injected gasoline and direct-injected diesel at matched conditions. The results indicate that reductions in UHC, CO, and PM are possible with direct-injected gasoline, while maintaining similar gross indicated efficiency as well as NOx emissions well below the EPA 2010 heavy-duty limit. Additionally, experimental results were simulated using multi-dimensional modeling in the KIVA-3V code coupled to a Discrete Multi-Component fuel vaporization model. The simulations suggest that further UHC reductions can be made by using wider injector angles which direct the gasoline spray away from the crevices.

Effect of Conical Spray and Multi-Hole Spray on Gasoline Engine Mixture Formation and Combustion Performance Based on Different Injection Strategies

2020 ◽  
Vol 143 (6) ◽  
Author(s):  
Shengli Wei ◽  
Zhiqing Yu ◽  
Zhilei Song ◽  
Fan Yang ◽  
Chengcheng Wu
Keyword(s):  
Gasoline Engine ◽  
Direct Injection ◽  
Mixture Distribution ◽  
Gasoline Direct Injection ◽  
Injection Timing ◽  
Mixture Formation ◽  
Injection Strategy ◽  
Gdi Engine ◽  
The Difference ◽  
Injection Strategies

Abstract This article presents a numerical investigation carried out to determine the effects of second and third injection timing on combustion characteristics and mixture formation of a gasoline direct injection (GDI) engine by comparing conical spray against multihole spray. The results showed that at the engine 80% full load of 2000 r/min, the difference in mixture distribution between the two sprays was obvious with double and triple injection strategies. With the second injection timing from 140 deg CA delay to 170 deg CA, the in-cylinder pressure, the in-cylinder temperature, and the heat release rate of the conical spray increased by 20.8%, 9.8%, and 30.7% and that of the multihole spray decreased by 30.7%, 13.6%, and 37.8%. The delay of the injection time reduced the performance of the engine with the multihole spray, and the performance of the multihole spray was obviously in the simulation of the triple injection strategy. However, for the conical spray, the application of the triple injection strategy increased the temperature and the pressure compared with the double injection strategy.

Analysis of the GDI Spray Dynamics Through Multidimensional Modeling and Flow Visualization in an Optically Accessible SI Engine

2014 ◽  
Author(s):  
Michela Costa ◽  
Ugo Sorge ◽  
Paolo Sementa ◽  
Alessandro Montanaro
Keyword(s):  
Direct Injection ◽  
Gasoline Direct Injection ◽  
Si Engine ◽  
Engine Model ◽  
Working Cycle ◽  
3D Engine ◽  
Experimental Side ◽  
The Difference ◽  
Wall Interaction ◽  
Injection Strategies

Present work is aimed at studying into detail mixture formation and combustion in a gasoline direct injection (GDI) engine working under stoichiometric mixture conditions. The study is performed both numerically and experimentally. From the experimental side, the engine, optically accessible, is characterized by collecting, for various injection strategies, in-cylinder pressure cycles and digital images. From the numerical side, a 3D engine model is developed, that includes proper sub-models for the spray dynamics and the spray-wall interaction. This last phenomenon is studied into detail by resorting to a preliminary 3D simulation of the spray impingement realized in a proper experiment, where the engine injector is mounted at a certain distance from a cold or hot wall. An interesting comparison between numerical and experimental images of the in-cylinder spray dynamics is presented, that also allows individuating the difference in the wallfilm deposition under various injection strategies. This opens the way to understand the difference in the combustion development arising as injection is anticipated or retarded in the engine working cycle.

Sign in / Sign up

Export Citation Format

Share Document