scholarly journals Characterizing the Development of Thermal Stratification in an HCCI Engine Using Planar-Imaging Thermometry

2009 ◽  
Vol 2 (1) ◽  
pp. 421-438 ◽  
Author(s):  
John E. Dec ◽  
Wontae Hwang
Keyword(s):  
Thermal Stratification ◽  
Planar Imaging ◽  
Hcci Engine

Development of a Postprocessing Methodology for Studying Thermal Stratification in an HCCI Engine

2012 ◽  
Vol 134 (10) ◽  
Author(s):  
Benjamin Lawler ◽  
Mark Hoffman ◽  
Zoran Filipi ◽  
Orgun Güralp ◽  
Paul Najt
Keyword(s):  
Mass Fraction ◽  
Thermal Stratification ◽  
Reaction Rates ◽  
Combustion Efficiency ◽  
Temperature Fields ◽  
Coolant Temperature ◽  
Analysis Tool ◽  
Gas Temperature ◽  
Hcci Engine ◽  
Mass Distributions

Naturally occurring thermal stratification significantly impacts the characteristics of homogeneous charge compression ignition (HCCI) combustion. The in-cylinder gas temperature distributions prior to combustion dictate the ignition phasing, burn rates, combustion efficiency, and unburned hydrocarbon and CO emissions associated with HCCI operation. Characterizing the gas temperature fields in an HCCI engine and correlating them to HCCI burn rates is a prerequisite for developing strategies to expand the HCCI operating range. To study the development of thermal stratification in more detail, a new analysis methodology for postprocessing experimental HCCI engine data is proposed. This analysis tool uses the autoignition integral in the context of the mass fraction burned curve to infer information about the distribution of temperature that exists in the cylinder prior to combustion. An assumption is made about the shape of the charge temperature profiles of the unburned gas during compression and after combustion starts elsewhere in the cylinder. Second, it is assumed that chemical reaction rates proceed very rapidly in comparison to the staggering of ignition phasing from thermal stratification. The autoignition integral is then coupled to the mass fraction burned curve to produce temperature-mass distributions that are representative of a particular combustion event. Due to the computational efficiency associated with this zero-dimensional calculation, a large number of zones can be simulated at very little computational expense. The temperature-mass distributions are then studied over a coolant temperature sweep. The results show that very small changes to compression heat transfer can shift the distribution of mass and temperature in the cylinder enough to significantly affect HCCI burn rates and emissions.

Development of a Post-Processing Methodology for Studying Thermal Stratification in an HCCI Engine

2012 ◽  
Author(s):  
Benjamin Lawler ◽  
Mark Hoffman ◽  
Zoran Filipi ◽  
Orgun Güralp ◽  
Paul Najt
Keyword(s):  
Mass Fraction ◽  
Thermal Stratification ◽  
Reaction Rates ◽  
Temperature Fields ◽  
Coolant Temperature ◽  
Analysis Tool ◽  
Gas Temperature ◽  
Post Processing ◽  
Hcci Engine ◽  
Mass Distributions

Naturally occurring thermal stratification significantly impacts the characteristics of HCCI combustion. The in-cylinder gas temperature distributions prior to combustion dictate the ignition phasing, burn rates, combustion efficiency, and unburned hydrocarbon and CO emissions associated with HCCI operation. Characterizing the gas temperature fields in an HCCI engine and correlating them to HCCI burn rates is a prerequisite for developing strategies to expand the HCCI operating range. To study the development of thermal stratification in more detail, a new analysis methodology for post-processing experimental HCCI engine data is proposed. This analysis tool uses the autoignition integral in the context of the mass fraction burned curve to infer information about the distribution of temperature that exists in the cylinder prior to combustion. An assumption is made about the shape of the charge temperature profiles of the unburned gas during compression and after combustion starts elsewhere in the cylinder. Secondly, it is assumed that chemical reaction rates proceed very rapidly in comparison to the staggering of ignition phasing from thermal stratification. The autoignition integral is then coupled to the mass fraction burned curve to produce temperature-mass distributions that are representative of a particular combustion event. Due to the computational efficiency associated with this zero-dimensional calculation, a large number of zones can be simulated at very little computational expense. The temperature-mass distributions are then studied over a coolant temperature sweep. The results show that very small changes to compression heat transfer can shift the distribution of mass and temperature in the cylinder enough to significantly affect HCCI burn rates and emissions.

scholarly journals Numerical investigation into the effect of direct fuel injection on thermal stratification in HCCI engine

2017 ◽  
Vol 169 (2) ◽  
pp. 137-140
Author(s):  
Michał GĘCA ◽  
Jacek HUNICZ ◽  
Piotr JAWORSKI
Keyword(s):  
Combustion Chamber ◽  
Thermal Stratification ◽  
Fuel Injection ◽  
Injection Timing ◽  
Ignition Timing ◽  
Hcci Engine ◽  
Auto Ignition ◽  
Negative Valve Overlap ◽  
Valve Overlap ◽  
Direct Fuel Injection

Despite the fact that HCCI engines are distinguished by mixture homogeneity, some degree of stratification always appears inside a combustion chamber. It is especially applied to residual effect engines utilizing negative valve overlap. Mixture stratification is a result of the imperfect mixing of fresh air with trapped residuals. Direct fuel injection introduces stratification as well, due to fuel vaporization. As a consequence, the temperature within the combustion chamber is uneven. Thermal stratification affects auto-ignition timing and combustion evolution in a high extent. The purpose of this study was to evaluate a degree of thermal stratification in HCCI engine utilizing negative valve overlap. Investigations were performed using three-dimensional CFD model of the combustion system, made by using AVL FIRE software. Simulations were realized for various timings of fuel injection into the cylinder. It was found that fuel injection timing had a significant effect on the thermal stratification and resulting auto-ignition timing.

Understanding the Effect of Wall Conditions and Engine Geometry on Thermal Stratification and HCCI Combustion

2014 ◽  
Author(s):  
Benjamin Lawler ◽  
Satyum Joshi ◽  
Joshua Lacey ◽  
Orgun Guralp ◽  
Paul Najt ◽  
...  
Keyword(s):  
Temperature Distribution ◽  
Heat Release ◽  
Wall Temperature ◽  
Compression Ratio ◽  
Thermal Stratification ◽  
Ceramic Coatings ◽  
Combustion Efficiency ◽  
Noticeable Effect ◽  
Hcci Engine ◽  
Hcci Combustion

Thermal stratification of the unburned charge in the cylinder has a profound effect on the burn characteristics of a Homogeneous Charge Compression Ignition (HCCI) engine. Experimental data was collected in a single cylinder, gasoline-fueled, HCCI engine in order to determine the effects of combustion chamber geometry and wall conditions on thermal stratification and HCCI combustion. The study includes a wall temperature sweep and variations of piston top surface material, piston top geometry, and compression ratio. The data is processed with a traditional heat release routine, as well as a post-processing tool termed the Thermal Stratification Analysis, which calculates an unburned temperature distribution from heat release. For all of the sweeps, the 50% burned point was kept constant by varying the intake temperature. Keeping the combustion phasing constant ensures the separation of the effects of combustion phasing from the effects of wall conditions alone on HCCI and thermal stratification. The results for the wall temperature sweep show no changes to the burn characteristics once the combustion phasing has been matched with intake temperature. This result suggests that the effects of wall temperature on HCCI are mostly during the gas-exchange portion of the cycle. The ceramic coatings were able to very slightly decrease the thermal width, increase the burn rate, increase the combustion efficiency, and decrease the cumulative heat loss. The combustion efficiency increased with the lower surface area to volume ratio piston and the lower compression ratio. Lastly, the compression ratio comparison showed a noticeable effect on the temperature distribution due to the effect of pressure on ignition delay, and the variation of TDC temperature required to match combustion phasing.

scholarly journals PLIF Measurements of Thermal Stratification in an HCCI Engine under Fired Operation

2011 ◽  
Vol 4 (1) ◽  
pp. 1669-1688 ◽  
Author(s):  
Jordan Snyder ◽  
Nicolas Dronniou ◽  
John E. Dec ◽  
Ronald Hanson
Keyword(s):  
Thermal Stratification ◽  
Hcci Engine

Immunszintigraphie mit 111ln-DTPA-markierten monoklonalen Antikörpern: Vergleich zwischen ECT und planarer Szintigraphie

1987 ◽  
Vol 26 (06) ◽  
pp. 258-262
Author(s):  
J. Happi ◽  
R. P. Baum ◽  
J. Frohn ◽  
B. Weimer ◽  
A. Halbsguth ◽  
...  
Keyword(s):  
Imaging Techniques ◽  
Diagnostic Procedures ◽  
Undifferentiated Carcinoma ◽  
Whole Body ◽  
Acquisition Time ◽  
Planar Imaging ◽  
Primary Tumors ◽  
Intraindividual Comparison ◽  
Single Detector ◽  
Increased Sensitivity

The present study was done in order to examine if the use of111ln-DTPA- labeled MAb fragments in place of 131l-labeled MAb fragments increases the sensitivity of tomographic immunoscintigraphy to reach the level of that of planar imaging techniques. In 11 patients with various primary tumors, local recurrences or metastases [colorectal carcinoma (n = 7), ovarian carcinoma (n = 2), papillary thyroid carcinoma (n = 1), undifferentiated carcinoma of the lung (n = 1)], immunoscintigraphy (IS) was carried out using 111ln-DTPA- labeled F(ab’)2 fragments of various MAbs (anti-CEA, OC 125, anti-hTG) and planar and tomographic imaging were compared intraindividually. By conventional diagnostic procedures, the presence of a tumor mass was confirmed (transmission computer tomography, ultrasound) or verified (131l whole-body scintigraphy, histology) in all cases. Immunoscintigraphy was positive in 9 out of 11 cases by ECT and in 10 out of 11 cases by planar imaging. When using 111 In-labeled MAb fragments, intraindividual comparison of ECT and planar imaging resulted in a similar sensitivity. The increased sensitivity of ECT using this tracer in contrast to 131l-labeled MAb fragments may be attributed to the fact that the physical properties of111 In are much more suitable for the gamma cameras most commonly used (single detector, 3/8” crystal); using 111 In-labeled MAb fragments, count rates sufficient for ECT can be obtained within a reasonable acquisition time. This allows to combine IS with the advantages of ECT regarding tumour localization and prevention of artefacts due to superposition of background.

Sign in / Sign up

Export Citation Format

Share Document