Homogeneous Charge Compression Ignition (HCCI): A New Concept for Near Zero NOx and Particulate Matter (PM) from Diesel Engine Combustion

2007 ◽  
Author(s):  
S. Juttu ◽  
S. S. Thipse ◽  
N. V. Marathe ◽  
M. K. Gajendra Babu
Keyword(s):  
Particulate Matter ◽  
Diesel Engine ◽  
Homogeneous Charge Compression Ignition ◽  
Compression Ignition ◽  
Engine Combustion ◽  
Homogeneous Charge

Operating Characteristics of Natural Gas Fueled Homogeneous Charge Compression Ignition Engine

1999 ◽  
Author(s):  
Y. Kawabata ◽  
K. Nakagawa ◽  
F. Shoji
Keyword(s):  
Natural Gas ◽  
Homogeneous Charge Compression Ignition ◽  
Nox Emission ◽  
Compression Ignition ◽  
Operating Characteristics ◽  
Compression Ignition Engine ◽  
Gas Engine ◽  
Engine Combustion ◽  
Gas Fueled ◽  
Homogeneous Charge

Abstract Recently, a new design of engine combustion that achieves higher efficiency and less NOx emission has been proposed. Some researchers have started studying the concept, which is called Homogeneous Charge Compression Ignition (HCCI), but there have been few reports on investigations using a future prospective alternative fuel, natural gas. In this study, natural gas fueled operation of HCCI using a single cylinder gas engine was conducted. Operating and exhaust characteristics were obtained. Experimental data confirmed the potential of higher efficiency and less NOx emission, though THC and CO were higher. Based on these data, the feasibility of this concept for gas engines is also examined.

scholarly journals Effect of Preheating Temperature and Fuel Properties on Combustion and Emission Characteristics of Homogeneous Charge Compression Ignition (HCCI) Engine

2021 ◽  
Vol 9 (5) ◽  
pp. 558-564
Keyword(s):  
Experimental Investigation ◽  
Diesel Engine ◽  
Air Temperature ◽  
Homogeneous Charge Compression Ignition ◽  
Fuel Properties ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Hcci Engine ◽  
Di Diesel Engine ◽  
Homogeneous Charge

The homogeneous charge compression ignition (HCCI) engine is the promising technology to reduce the pollutants without affecting its performance and it is also proved by the many studies. This study investigates the performance and emission characteristics of HCCI engine fuelled with diesel –waste cooking oil (WCO) blends and also analysed the effect of air temperature and fuel properties on HCCI engine combustion. The experimental investigation was conducted with single cylinder DI diesel engine and it was slightly modified to port injection system for premixing the charge. The electric air heater was adopted in suction pipe to preheat the inlet air. The experimental investigation conducted in two phases, in the first phase the conventional DI diesel engine was tested with different fuel blends such as B25, B50, B75 and B100 and notes the readings. In the next phase, HCCI engine was operated with same blend ratios. During the experimentation on HCCI engine, the suction air temperature was varied between 40⁰C to 90⁰C. From the experimental results, it was found that the HCCI engine has emitted low NOx and smoke emissions at 80⁰C of air temperature for all the blends. Whereas the HCCI engine emitted more carbon monoxide (CO) and hydrocarbon (HC) emissions due to lean mixture causes misfiring in the chamber. In addition, it is also noted that the value of CO and HC has been varied with diesel –WCO blends. The specific fuel consumption (SFC) is increased for diesel and biodiesel fuel in HCCI engine compared to compression ignition (CI) engine

Experimental and Numerical Study on Auto-Ignition and Combustion of Homogeneous Charge Compression Ignition Fueled With Dimethyl Ether

2005 ◽  
Author(s):  
Ma-Ji Luo ◽  
Zhen Huang ◽  
De-Gang Li
Keyword(s):  
Diesel Engine ◽  
Dimethyl Ether ◽  
Homogeneous Charge Compression Ignition ◽  
Numerical Study ◽  
National Laboratory ◽  
Zone Model ◽  
Compression Ignition ◽  
Hcci Combustion ◽  
Key Species ◽  
Homogeneous Charge

Experimental study of the autoignition and combustion characteristics of homogeneous charge compression ignition (HCCI) was carried out on a modified diesel engine fuelled with Dimethyl ether (DME) fuel. Numerical simulations were also performed by using the detailed chemical kinetic mechanism of DME oxidation proposed by American Lawrence Livermore National Laboratory (LLNL). The experimental results indicate that HCCI combustion with DME fuel can be realized in diesel engine with a few modifications, and it has a two-stage heat release characteristics. The emissions of HCCI combustion with DME fuel can be characterized by free of smoke and near zero NOx. The simulation results suggest that the single-zone model can accurately predict the ignition timings, including the low temperature ignition and high temperature ignition. The variations of key species (such as H2O2, CH2O, OH, HCO, CH, etc) with crank angle during fuel oxidation and the effects of engine operating parameters on HCCI combustion can also be analyzed by numerical simulation.

Sign in / Sign up

Export Citation Format

Share Document