The Effect of Solidification Time and Solution-Treatment Time on the Tensile Properties of a Cast 319-T7 Aluminum Alloy

2007 ◽  
Author(s):  
J. M. Boileau ◽  
J. W. Zindel ◽  
L. A. Godlewski ◽  
J. E. Allison ◽  
K. A. Kofeldt
Keyword(s):  
Aluminum Alloy ◽  
Tensile Properties ◽  
Treatment Time ◽  
Solution Treatment ◽  
Solidification Time

scholarly journals Investigation on Compressive Formability and Microstructure Evolution of 6082-T6 Aluminum Alloy

Metals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 469
Author(s):  
Zhouli Xu ◽  
Huijuan Ma ◽  
Ning Zhao ◽  
Zhili Hu
Keyword(s):  
Aluminum Alloy ◽  
Treatment Time ◽  
Heating Temperature ◽  
Solution Treatment ◽  
Heating Time ◽  
Strengthening Effect ◽  
Forming Process ◽  
Production Time ◽  
Precipitated Phase ◽  
First Choice

The 6xxx aluminum alloy is the first choice for automotive lightweight forgings due to its excellent performance, high strength and low weight. The production time of current aluminum alloy forging generally exceeds 10 h. To reduce the production time of traditional aluminum alloy forgings, 6082-T6 aluminum alloy is used in the forming process. The effects of different heating temperatures (200 °C, 300 °C, and 400 °C) and deformation degrees (30%, 50%, and 70%) on the deformability and properties of 6082-T6 billets have been investigated. The results show that when the heating temperature is higher than 300 °C, the compressive deformation resistance obviously decreases with increasing strength. With compression at 200 °C and 70% deformation with short heating time, the strength of the sample is close to the T6 (solution treatment and artificial aging) state. A large number of dislocations and subgrains were introduced due to the compression deformation, and their amounts decreased as the heating temperature increased. The size of the precipitated phase β′′ slightly grows under a heating temperature of 200 °C. However, when the heating temperature is higher than 300 °C, the precipitated phase gradually changes from β′′, which is optimal for the strengthening effect, to β′ and β, which offer weaker strengthening. Therefore, under a lower heating temperature of 200 °C for 5 min, a large number of dislocations are introduced with the β′′ precipitated phase, leading to higher strength with less heat treatment time.

ALCAN B33S

Alloy Digest ◽  
1967 ◽  
Vol 16 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Aluminum Company

Abstract Alcan B33S is an aluminum alloy recommended for architectural shapes requiring hard, corrosion resistant, colored finishes. It contains enough magnesium to render it heat treatable. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Al-170. Producer or source: Aluminum Company of Canada Ltd.

AMBRALOY 928

Alloy Digest ◽  
1958 ◽  
Vol 7 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
General Corrosion ◽  
Copper Aluminum

Abstract AMBRALOY-928 is a copper-aluminum alloy having high strength, hardness and excellent resistance to general corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Cu-69. Producer or source: American Brass Company.

KAISER ALUMINUM ALLOY 6033

Alloy Digest ◽  
2003 ◽  
Vol 52 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Alloy 6061

Abstract Kaiser Aluminum alloy 6033 has improved machinability over alloy 6061 with an addition of bismuth. The alloy also has a good anodizing response and higher strength than alloy 6061. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-386. Producer or source: Tennalum, A Division of Kaiser Aluminum.

KAISER ALUMINUM ALLOY 4026

Alloy Digest ◽  
2003 ◽  
Vol 52 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Sliding Friction ◽  
High Strength ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Friction Resistance

Abstract Kaiser Aluminum alloy 4026 has high strength and good wear resistance, as well as galling resistance. It was developed for sliding friction resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: AL-385. Producer or source: Tennalum, A Division of Kaiser Aluminum.

BRIDGEPORT 54

Alloy Digest ◽  
1964 ◽  
Vol 13 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Erosion Resistance ◽  
Heat Treating ◽  
Good Strength ◽  
High Corrosion ◽  
Copper Zinc ◽  
Strength And Ductility

Abstract Bridgeport 54 is a copper-zinc-aluminum alloy having high corrosion and erosion resistance combined with good strength and ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Cu-141. Producer or source: Bridgeport Brass Company.

KAISER ALUMINUM ALLOY 6262

Alloy Digest ◽  
1999 ◽  
Vol 48 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Automotive Parts

Abstract Kaiser Aluminum alloy 6262 (Tennalum alloy 6262) is an Al-Mg-Si-Cu-Cr-Pb-Bi alloy with characteristic good machinability and corrosion resistance and a good acceptance of coatings (anodize response). It is typically used in automotive parts, fittings, building hardware, and valve components. This datasheet provides information on composition, physical properties, tensile properties, and shear strength as well as fatigue. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-361. Producer or source: Tennalum, A Division of Kaiser Aluminum.

ALCOA 6009 ALLOY

Alloy Digest ◽  
1985 ◽  
Vol 34 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloys ◽  
Production Processes ◽  
Aluminum Company ◽  
Reasonable Cost ◽  
Comparable Performance

Abstract ALCOA 6009 ALLOY offers the potential for lighter weight panels than steel or other aluminum alloy auto body sheet. It provides comparable performance, compatibility with existing production processes and a reasonable cost per unit of weight saved. It provides better dent resistance than most other aluminum body sheet alloys. Alloy 6009 has formability close to Aluminum 5182 with significantly higher weight savings. Scrap compatibility eliminates the segregation problems of mixed 2xxx and 5xxx scrap. Alloy 6009 scrap is readily recycled into itself or into casting alloys. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Al-262. Producer or source: Aluminum Company of America.

ALCAN 74S

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Aluminum Company

Abstract Alcan 74S is an aluminum alloy designed for highly stressed applications where welding is involved. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Al-191. Producer or source: Aluminum Company of Canada Ltd.

IMPALCO 770

Alloy Digest ◽  
1962 ◽  
Vol 11 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Strength Aluminum Alloy ◽  
Structural Parts

Abstract IMPALCO 770 is a heat treatable, high strength aluminum alloy available in bar form for machining applications. It is recommended for highly stressed structural parts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-120. Producer or source: Imperial Aluminium Company Ltd.

Sign in / Sign up

Export Citation Format

Share Document