Effects of relative port orientation on the in-cylinder flow patterns in a small unit displacement HSDI Diesel Engine

2005 ◽  
Author(s):  
Giuseppe Cantore ◽  
Stefano Fontanesi ◽  
Vincenzo Gagliardi ◽  
Simone Malaguti
Keyword(s):  
Diesel Engine ◽  
Flow Patterns ◽  
Small Unit ◽  
Hsdi Diesel Engine ◽  
Cylinder Flow

CFD Modelling of the Effects of Injection Timing on the Combustion Process and Emissions in an HSDI Diesel Engine

2012 ◽  
Author(s):  
Raouf Mobasheri ◽  
Zhijun Peng
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Cfd Simulation ◽  
Direct Injection ◽  
Combustion Process ◽  
Injection Timing ◽  
Cfd Modelling ◽  
Combustion Modeling ◽  
Pressure Trace ◽  
Hsdi Diesel Engine

High-Speed Direct Injection (HSDI) diesel engines are increasingly used in automotive applications due to superior fuel economy. An advanced CFD simulation has been carried out to analyze the effect of injection timing on combustion process and emission characteristics in a four valves 2.0L Ford diesel engine. The calculation was performed from intake valve closing (IVC) to exhaust valve opening (EVO) at constant speed of 1600 rpm. Since the work was concentrated on the spray injection, mixture formation and combustion process, only a 60° sector mesh was employed for the calculations. For combustion modeling, an improved version of the Coherent Flame Model (ECFM-3Z) has been applied accompanied with advanced models for emission modeling. The results of simulation were compared against experimental data. Good agreement of calculated and measured in-cylinder pressure trace and pollutant formation trends were observed for all investigated operating points. In addition, the results showed that the current CFD model can be applied as a beneficial tool for analyzing the parameters of the diesel combustion under HSDI operating condition.

Numerical Analysis of Swirl Control Strategies in a Four Valve HSDI Diesel Engine

2004 ◽  
Author(s):  
S. Fontanesi ◽  
E. Mattarelli ◽  
L. Montorsi
Keyword(s):  
Flow Field ◽  
Control Strategies ◽  
Cfd Simulations ◽  
Full Load ◽  
Partial Load ◽  
Swirl Intensity ◽  
Port Design ◽  
Current Production ◽  
Hsdi Diesel Engine ◽  
Cylinder Flow

Recent four value HSDI Diesel engines are able to control the swirl intensity, in order to enhance the in-cylinder flow field at partial load without decreasing breathing capabilities at full load. Making reference to a current production engine, the purpose of this paper is to envestiage the influence of port design and flow-control strategies on both engine permeability and in-cylinder flow field. Using previously validated models, 3-D CFD simulations of the intake and compression strokes are performed in order to predict the in-cylinder flow patterns originated by the different configurations. The comparison between the two configurations in terms of airflow at full load indicates that Geometry 2 can trap 3.03% more air than Geometry 1, while the swirl intensity at IVC is reduced (−30%). The closure of one intake valve (the left one) is very effective to enhance the swirl intensity at partial load: the Swirl Ratio at IVC passes from 0.7 to 2.6 for Geometry 1, while for Geometry 2 it varies from 0.4 to 2.9.

Sign in / Sign up

Export Citation Format

Share Document