Combustion Characteristics of Emulsified Palm Oil Methyl Ester for Diesel Fuel

2005 ◽  
Author(s):  
Eiji Kinoshita ◽  
Kazunori Hamasaki ◽  
Ishikawa Takashi ◽  
Thet Myo
Keyword(s):  
Methyl Ester ◽  
Palm Oil ◽  
Diesel Fuel ◽  
Combustion Characteristics

Experimental Study on Performance of a Single-Cylinder Engine Fuelled With Diesel and Vegetable Oil-Diesel Blends

2019 ◽  
Author(s):  
Amarlo Banania ◽  
Edwin N. Quiros ◽  
Jose Gabriel E. Mercado
Keyword(s):  
Methyl Ester ◽  
Vegetable Oil ◽  
Vegetable Oils ◽  
Palm Oil ◽  
Diesel Fuel ◽  
Power Output ◽  
Fossil Fuels ◽  
Corn Oil ◽  
The Philippines ◽  
Single Cylinder

Abstract Continuous demand for energy in order to provide to an ever-increasing global population calls for use of or integration of other alternative sources of fuel other than fossil fuels. Many countries all over the world use vegetable oils blended with neat diesel as alternative and using these biofuels can help alleviate lessen the emissions releases on the environment as well as the country’s dependency on fossil fuels. In the Philippines Coconut Methyl Ester (CME) is the primary vegetable oil used, however in this study we used four other vegetable oils which are RCO (Refined Corn Oil), RPO (Refine Palm Oil), JFO (Jahtropa Filtered Oil) and JME (Jathropa Methyl Ester) in order to investigate the possibility of their use in diesel engines. A 6.3 kW single-cylinder, four stroke cycle, direct injection engine was used for the study. This kind of engine is typically used in the Philippines for different purposes such as backup power for households, for boats, pumps and for agriculture use. The specific fuel consumption of the biodiesel blends compared to neat diesel fuel ranged from −15% to 15% with RCO and JME having higher SFC and JFO and RPO having lower SFC. Fuel conversion efficiency of the varied from −12% to 12% with JFO and RPO having higher efficiency and RCO and JME having lower efficiency. The power of the varied from −7% to 6% with RPO having lower power output, JFO having higher power output and JME and RCO having similar power output to neat diesel fuel. At full load condasition Neat Diesel Fuel blended with 15% Refined Palm Oil showed the greatest improvement in SFC while Neat Diesel Fuel blended with 10% Jathropa Filtered Oil showed the best power output.

809 Combustion Characteristics of a Dual Fuel Diesel Engine with Palm Oil Methyl Ester /1-ButanoI Blend

2013 ◽  
Vol 2013.66 (0) ◽  
pp. 251-252
Author(s):  
Ryuki YOSHIMOTO ◽  
Eiji KONOSHITA ◽  
Yasufumi YOSHIMOTO ◽  
Takeshi OTAKA
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Palm Oil ◽  
Combustion Characteristics ◽  
Dual Fuel

scholarly journals Palm Oil-based Fatty Acid Methyl Ester (FAME) Biodiesel to Meet High Blending Rates in Malaysia

2021 ◽  
Vol 36 (1) ◽  
pp. 550-557
Author(s):  
Mahendran Subramaniam ◽  
Shamsul Sarip ◽  
Abdul Yasser Abd. Fatah ◽  
Hazilah Mad Kaidi
Keyword(s):  
Fatty Acid ◽  
Methyl Ester ◽  
Fatty Acid Methyl Ester ◽  
Palm Oil ◽  
Diesel Fuel ◽  
Acid Methyl Ester ◽  
Local Market ◽  
Industrial Sectors ◽  
Acid Methyl ◽  
The Government

Palm oil methyl ester (PME) is a form of fatty acid methyl ester (FAME) which in principle is biodiesel. Malaysia could greatly leverage the abundance of PME sources given its status as a palm oil-producing country. In this paper, palm oil is evaluated for its potential as a biofuel feedstock and its derivatives’ vast use in the domestic market but limited use in other regions. In order to create a growth market of PME, Malaysia has introduced an increase of PME blend component in its nation’s biodiesel use for transport and industrial sectors. A phased increase from 5% to the latest of 20% PME blend in biodiesel certainly has the potential to reduce greenhouse gas emissions, while creating a boost to the local market. However, the government must be careful in managing subsidies of conventional petroleum-based diesel fuel, as this would have an eventual effect on the supply chain of biodiesel in Malaysia. There are limited studies on diesel fuel physicochemical characteristics that are used as base-stock for the biodiesel blend and whether it could be manipulated to maximise yield while maintaining conformance to mandated fuel standards. Multiple relevant research papers were studied of its relevance to PME use as biodiesel FAME to meet high blending rates in Malaysia.

Diesel Combustion Characteristics of Emulsified Palm Oil Methyl Ester

2004 ◽  
Vol 2004.57 (0) ◽  
pp. 171-172
Author(s):  
Kazunori HAMASAKI ◽  
Eiji KINOSHITA ◽  
Takashi ISHIKAWA ◽  
Choesnul JAQIN ◽  
Takayuki OYAMA
Keyword(s):  
Methyl Ester ◽  
Palm Oil ◽  
Combustion Characteristics ◽  
Diesel Combustion

Experimental Analysis of Emulsified Palm Oil Methyl Ester Towards Alternative Diesel Fuel

2012 ◽  
Author(s):  
Biplab K. Debnath ◽  
Niranjan Sahoo ◽  
Ujjwal K. Saha
Keyword(s):  
Methyl Ester ◽  
Palm Oil ◽  
Diesel Fuel ◽  
Stability Study ◽  
Oxides Of Nitrogen ◽  
Gas Temperature ◽  
Two Phase ◽  
Oil Emulsion ◽  
Performance And Emission ◽  
Phase Water

Palm oil methyl ester (POME) produced from crude palm oil have some excellent properties which makes it a feasible alternative to diesel fuel. However, its higher oxygen content makes it nitrogen oxide emission prone when burned in diesel engines. This problem can be resolved by emulsifying POME with distilled water in the presence of suitable surfactant. Two phase water in oil emulsion is prepared by using ultrasonic bath sonication. SPAN 80, a lipophilic surfactant is used for 1% by volume to prepare the emulsion. Water quantity in the emulsion is varied by 5% and 10% by volume and stability study is performed. It is found that emulsion with 5% water is more stable. Thereafter, POME emulsion samples are prepared with 5% water and tested in a variable compression ratio diesel engine. The performance and emission characteristics are investigated for a set of loads and compression ratios (CR). The experimental observations show that 5% water in POME produce 3.5% lower brake thermal efficiency and 11% higher brake specific fuel consumption as compared to baseline diesel. Furthermore, the exhaust gas temperature and other emissions like oxides of carbon, oxides of nitrogen and hydrocarbon for the emulsified POME are found to be lower than the baseline diesel.

Diesel Combustion Characteristics of Palm Oil Methyl Ester with 1-Butanol

2014 ◽  
Author(s):  
Takeshi Otaka ◽  
Kazuyo Fushimi ◽  
Eiji Kinoshita ◽  
Yasufumi Yoshimoto
Keyword(s):  
Methyl Ester ◽  
Palm Oil ◽  
Combustion Characteristics ◽  
Diesel Combustion

scholarly journals Performance and emissions characteristics of C.I. engine fueled with palm oil/palm oil methyl ester blended with diesel fuel

2018 ◽  
Vol 27 (2) ◽  
pp. 215-219 ◽  
Author(s):  
M.S. Gad ◽  
R. El-Araby ◽  
K.A. Abed ◽  
N.N. El-Ibiari ◽  
A.K. El Morsi ◽  
...  
Keyword(s):  
Methyl Ester ◽  
Palm Oil ◽  
Diesel Fuel ◽  
Oil Palm ◽  
Performance And Emissions

scholarly journals Diesel Combustion Characteristics of Emulsified Palm Oil Methyl Ester

2007 ◽  
Vol 73 (733) ◽  
pp. 1965-1971 ◽  
Author(s):  
Eiji KINOSHITA ◽  
Kazunori HAMASAKI ◽  
Masataka KITTE ◽  
Akio KAMEDA
Keyword(s):  
Methyl Ester ◽  
Palm Oil ◽  
Combustion Characteristics ◽  
Diesel Combustion
Sign in / Sign up

Export Citation Format

Share Document