Transition Quality Between Spark Ignition and Homogeneous Charge Compression Ignition Modes Using Two Different VVT Strategies: Cam Profile Switching and Phasing Strategy Versus Fully Variable Valve Train Strategy

2005 ◽  
Author(s):  
N. Milovanovic ◽  
D. W. Blundell ◽  
J. W. G. Turner
Keyword(s):  
Homogeneous Charge Compression Ignition ◽  
Spark Ignition ◽  
Valve Train ◽  
Compression Ignition ◽  
Variable Valve Train ◽  
Strategy Versus ◽  
Cam Profile ◽  
Variable Valve ◽  
Homogeneous Charge

Control of a spark ignition homogeneous charge compression ignition mode transition on a gasoline direct injection engine

2007 ◽  
Vol 221 (7) ◽  
pp. 867-875 ◽  
Author(s):  
G Tian ◽  
Z Wang ◽  
Q Ge ◽  
J Wang ◽  
S Shuai
Keyword(s):  
Homogeneous Charge Compression Ignition ◽  
Direct Injection ◽  
Spark Ignition ◽  
Gasoline Direct Injection ◽  
Compression Ignition ◽  
Combustion Mode ◽  
Key Issues ◽  
Cam Profile ◽  
Negative Valve Overlap ◽  
Homogeneous Charge

The hybrid combustion mode is an ideal operation strategy for a gasoline homogeneous charge compression ignition (HCCI) engine. A stable and smooth spark ignition (SI)/HCCI switch has been an issue in the research on multimode combustion. In this paper, the switch process has two key issues; the cam profile and throttle opening. With the developed two-stage cam system, the valve phase strategy can be switched within one engine cycle, from the normal cam profile for the SI mode to a negative valve overlap (NVO) profile for the HCCI mode, or vice versa. For a smoother and more stable switch, the throttle change was separated from the cam profile switch, which was called the stepped switch. The effect of throttle opening on HCCI combustion was studied, and the results showed that the concept of the stepped switch was reliable. With gasoline direct injection (GDI) the combustion mode switches from both SI and HCCI sides were smooth, rapid, and robust, without any abnormal combustion such as knocking and misfiring.

A physics-based approach to the control of homogeneous charge compression ignition engines with variable valve actuation

2005 ◽  
Vol 6 (4) ◽  
pp. 361-375 ◽  
Author(s):  
G M Shaver ◽  
M J Roelle ◽  
P A Caton ◽  
N B Kaahaaina ◽  
N Ravi ◽  
...  
Keyword(s):  
Internal Combustion Engines ◽  
Homogeneous Charge Compression Ignition ◽  
Control Strategies ◽  
Combustion Process ◽  
System Control ◽  
Compression Ignition ◽  
Variable Valve Actuation ◽  
Variable Valve ◽  
Homogeneous Charge ◽  
Valve Actuation

Homogeneous charge compression ignition (HCCI) is a promising low-temperature combustion strategy for reducing NOx emissions and increasing efficiency in internal combustion engines. However, HCCI has no direct combustion initiator and, when achieved by reinducting or trapping residual exhaust gas with a variable valve actuation (VVA) system, becomes a dynamic process as the temperature of the residual gas couples one cycle to the next. These characteristics of residual-affected HCCI present a challenge for control engineers and a barrier to implementing HCCI in a production engine. In order to address these challenges, this paper outlines physics-based control strategies for both the VVA system and the HCCI combustion process. The results show that VVA system control can provide arbitrary valve timings on a cycle-to-cycle basis, enabling tight control of HCCI. By abstracting these valve timings further into an inducted gas composition and an effective compression ratio, model-based controllers can be developed to control simultaneously load and combustion timing in an HCCI engine.

A control-oriented hybrid combustion model of a homogeneous charge compression ignition capable spark ignition engine

2012 ◽  
Vol 226 (10) ◽  
pp. 1380-1395 ◽  
Author(s):  
Xiaojian Yang ◽  
Guoming G Zhu
Keyword(s):  
Homogeneous Charge Compression Ignition ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Combustion Model ◽  
Mode Transition ◽  
Compression Ignition ◽  
Combustion Mode ◽  
Combustion Phase ◽  
Compression Ignition Combustion ◽  
Homogeneous Charge

To implement the homogeneous charge compression ignition combustion mode in a spark ignition engine, it is necessary to have smooth mode transition between the spark ignition and homogeneous charge compression ignition combustions. The spark ignition–homogeneous charge compression ignition hybrid combustion mode modeled in this paper describes the combustion mode that starts with the spark ignition combustion and ends with the homogeneous charge compression ignition combustion. The main motivation of studying the hybrid combustion mode is that the percentage of the homogeneous charge compression ignition combustion is a good parameter for combustion mode transition control when the hybrid combustion mode is used during the transition. This paper presents a control oriented model of the spark ignition–homogeneous charge compression ignition hybrid combustion mode, where the spark ignition combustion phase is modeled under the two-zone assumption and the homogeneous charge compression ignition combustion phase under the one-zone assumption. Note that the spark ignition and homogeneous charge compression ignition combustions are special cases in this combustion model. The developed model is capable of simulating engine combustion over the entire operating range, and it was implemented in a real-time hardware-in-the-loop simulation environment. The simulation results were compared with those of the corresponding GT-Power model, and good correlations were found for both spark ignition and homogeneous charge compression ignition combustions.

Sign in / Sign up

Export Citation Format

Share Document