Evolution of Bench Test Methods to Validate Suspension Struts for Passenger Cars on Indian Roads

2005 ◽  
Author(s):  
Sanjeev Annigeri
Keyword(s):  
Test Methods ◽  
Bench Test ◽  
Passenger Cars

scholarly journals Test methods for autonomy of electric vehicles

2018 ◽  
Vol 19 (12) ◽  
pp. 27-31
Author(s):  
Arkadiusz Krzysztof Małek ◽  
Marek Ogrodnik
Keyword(s):  
Electric Vehicles ◽  
Test Methods ◽  
Testing Methods ◽  
Passenger Cars

The article discusses various types of testing methods for autonomy of electric vehicles. The tests were divided into laboratory and road tests and described in detail. An application for usefulness of selected types of tests to the size of the tested vehicles were presented: passenger cars, vans, trucks and buses. The research part presents road tests of the range of the prototype Ursus Elvi vehicle.

scholarly journals FEATURES OF STRENGTH TESTING OF PASSENGER WAGON AUTOMATIC REGULATORS

2020 ◽  
Vol - (1(16)) ◽  
pp. 20-27
Author(s):  
К. Boriak ◽  
◽  
О. Lymarenko ◽  
N. Peretiaka ◽  
◽  
...  
Keyword(s):  
Stress State ◽  
Tensile Load ◽  
Longitudinal Direction ◽  
Load Force ◽  
Bench Test ◽  
Passenger Cars ◽  
Brake Pads ◽  
Automatic Regulator ◽  
Allowable Range ◽  
Residual Deformations

The automatic regulator РКЗТ-675 (РТПР-675) and РТПР-675M is installed in the brake lever transmission of the passenger car and used for automatical maintenance of gaps between the surfaces of rolling of wheel pairs and brake pads within the established limits irrespective of the wear of the rolling surfaces of wheels. The design of auto regulators allows you to change the stroke of the piston rod and the brake cylinder and to manually release and tighten the regulator. Scope of auto regulators: freight, passenger cars and electric trains of the main railways. The article is devoted to solving the problem of contradictions in clause 15.5.7 of the current departmental Ukrainian instruction ЦЛ-0013 for repairing brake equipment of the railway carriage of the existing requirement for mandatory compliance with screw unscrewing in size "a" within 300-350 mm when testing automatic regulators on an automatic test stand for strength under load a normalized force of 8t in the longitudinal direction, provided that there are no residual deformations of the automatic regulator screw along its length. The article aims to refute the dependence of the values of the stress state of an automatic regulator when testing its strength on a test bench from a change in its length in the entire possible range of screw unscrewing by size "a" in the allowable range of 0-600 mm. The problem is solved by calculation using two different methods, and the results of the stress state values of the automatic regulator with different lengths of screw unscrewing by size “a” are compared with each other. Based on this, the general conclusion is made that the size “a” (within the range of 0–600 mm) of the automatic regulator screw unscrewing when testing it for strength with the same load force (N = 8t ≈ 80 кН) in the longitudinal direction does not affect the calculated value of the screw tension σ = 113.23 MPa when tested on an automatic bench. The developers of the departmental Ukrainian instruction ЦЛ-0013 are invited to make in clause 15.5.7 corresponding changes regarding the requirement of optional observance of the value of the size "a" within 300-350 mm at the bench test of the automatic regulators for the tensile load under the standardized force of 8t.

Comparison of Bench Test Methods to Evaluate Heavy Duty Coolant Thermal Stability

2007 ◽  
Vol 4 (4) ◽  
pp. 100634 ◽  
Author(s):  
Yu-Sen Chen ◽  
R. Doug Hudgens ◽  
Edward R. Eaton ◽  
W. Matulewicz ◽  
S. W. Dean
Keyword(s):  
Thermal Stability ◽  
Test Methods ◽  
Bench Test ◽  
Heavy Duty

Development of bench test methods for the evaluation of ion-implanted materials: piston/bore application

1997 ◽  
Vol 88 (1-3) ◽  
pp. 190-196 ◽  
Author(s):  
X. Qiu ◽  
A. Hamdi ◽  
A. Elmoursi ◽  
G. Malaczynski
Keyword(s):  
Test Methods ◽  
Bench Test ◽  
Ion Implanted

scholarly journals An Improved Design of the Engine Bench Test Tool for the Dual Mass Flywheel (DMF)

2021 ◽  
Vol 231 ◽  
pp. 03002
Author(s):  
Fan Dong ◽  
Hong Zhang ◽  
Ben Wang ◽  
Zeguo Du ◽  
XiaoYu Yang
Keyword(s):  
Test Bench ◽  
Ball Bearing ◽  
Bench Test ◽  
Passenger Cars ◽  
Engine Torque ◽  
Test Tool ◽  
Light Trucks ◽  
Spline Shaft ◽  
Improved Design ◽  
Hot Test

At present, a lot of passenger cars and light trucks are equipped with the dual mass flywheel, which can decrease the non-uniformity of the indicated engine torque. In engine bench test, the secondary mass of the dual mass flywheel can’t be fixed because there is no transmission system on the test bench. As a result, the secondary mass of the dual mass flywheel will have radial and circumferential movements, which may lead to a damage to the dual mass flywheel. This paper presents an improved design of the crafting tool for the dual mass flywheel to protect the secondary mass during the engine bench test. For the improved design, the cylinder body is used for the positioning of the crafting tool, and a spline shaft and a ball bearing of centripetal adjustment are chosen to fix the secondary mass. Through this tool, the dual mass flywheel engine can be tested on the test bench without a starting shaft, and the disassembling of the engine flywheel bolts during the hot test can be avoided.

scholarly journals Novel Test Methods to Optimize Fuel Economy in Passenger Cars Using Organic Friction Modifiers

2016 ◽  
Vol 11 (5) ◽  
pp. 594-600 ◽  
Author(s):  
Eugene Scanlon ◽  
Shaun R. Seibel ◽  
Thomas E. Hayden ◽  
Robert J. Bacchi ◽  
Jason A. Holmes
Keyword(s):  
Fuel Economy ◽  
Test Methods ◽  
Friction Modifiers ◽  
Passenger Cars
Sign in / Sign up

Export Citation Format

Share Document