A Comparison of Energy Use for a Direct-Hydrogen Hybrid Versus a Direct-Hydrogen Load-Following Fuel Cell Vehicle

2003 ◽  
Author(s):  
Joshua Cunningham ◽  
Robert Moore ◽  
Sitaram Ramaswamy ◽  
Karl-Heinz Hauer
Keyword(s):  
Fuel Cell ◽  
Energy Use ◽  
Fuel Cell Vehicle ◽  
Load Following

Analysis of Effects of Fuel Cell System Dynamics on Optimal Energy Management

2017 ◽  
Author(s):  
Kai Wu ◽  
Ming Kuang ◽  
Milos Milacic ◽  
Xiaowu Zhang ◽  
Jing Sun
Keyword(s):  
Fuel Cell ◽  
Energy Management ◽  
Fuel Economy ◽  
Cell System ◽  
Fuel Cell Vehicle ◽  
Fuel Cell System ◽  
Optimal Energy ◽  
Load Following ◽  
Optimal Energy Management ◽  
Level 1

Dynamic characteristics of a proton exchange membrane fuel cell (PEMFC) system can impact fuel economy and load following performance of a fuel cell vehicle, especially if those dynamics are ignored in designing top-level energy management strategy. To quantify the effects of fuel cell system (FCS) dynamics on optimal energy management, dynamic programming (DP) is adopted in this study to derive optimal power split strategies at two levels: Level 1, where the FCS dynamics are ignored, and Level 2, where the FCS dynamics are incorporated. Analysis is performed to quantify the differences of these two resulting strategies to understand the effects of FCS dynamics. While Level 1 DP provides significant computational advantages, the resulting strategy leads to load following errors that need to be mitigated using battery or FCS itself. Our analysis shows that up to 5% fuel economy penalty on New York city cycle (NYCC) and 3% on supplemental federal test procedure (US06) can be resulted by ignoring FCS dynamics, when the dominant dynamics of the FCS has settling time as slow as 8 seconds.

scholarly journals A Simple and Safe Strategy for Improving the Fuel Economy of a Fuel Cell Vehicle

Mathematics ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 604
Author(s):  
Nicu Bizon ◽  
Phatiphat Thounthong
Keyword(s):  
Fuel Cell ◽  
Real Time ◽  
Fuel Consumption ◽  
Fuel Economy ◽  
Utilization Efficiency ◽  
Fuel Cell Vehicle ◽  
Total Power ◽  
Load Range ◽  
Feed Forward ◽  
Load Following

A new real-time strategy is proposed in this article to optimize the hydrogen utilization of a fuel cell vehicle, by switching the control references of fueling regulators, based on load-following. The advantages of this strategy are discussed and compared, with advanced strategies that also use the aforementioned load-following mode regulator of fueling controllers, but in the entire loading range, respectively, with a benchmark strategy utilizing the static feed-forward control of fueling controllers. Additionally, the advantages of energy-storage function in a charge-sustained mode, such as a longer service life and reduced size due to the implementation of the proposed switching strategy, are presented for the dynamic profiles across the entire load range. The optimization function was designed to improve the fuel economy by adding to the total power of the fuel utilization efficiency (in a weighted way). The proposed optimization loop will seek the reference value to control the fueling regulator in real-time, which is not regulated by a load-following approach. The best switching threshold between the high and low loading scales were obtained using a sensitivity analysis carried out for both fixed and dynamic loads. The results obtained were promising—(1) the fuel economy was two-times higher than the advanced strategies mentioned above; and (2) the total fuel consumption was 13% lower than the static feed-forward strategy. This study opens new research directions for fuel cell vehicles, such as for obtaining the best fuel economy or estimating fuel consumption up to the first refueling station on the planned road.

Evaluation of Electric Load Following Capability on Fuel Cell System Fueled by High-Purity Hydrogen

2011 ◽  
Vol 131 (12) ◽  
pp. 927-935
Author(s):  
Yusuke Doi ◽  
Deaheum Park ◽  
Masayoshi Ishida ◽  
Akitoshi Fujisawa ◽  
Shinichi Miura
Keyword(s):  
Fuel Cell ◽  
High Purity ◽  
Cell System ◽  
Electric Load ◽  
Fuel Cell System ◽  
Load Following ◽  
High Purity Hydrogen

Load Following Function of Fuel Cell Plant in Distributed Environment

2005 ◽  
Vol 1 (03) ◽  
pp. 285-290 ◽  
Author(s):  
F. González-Longatt ◽  
◽  
A. Hernandez ◽  
F. Guillen ◽  
C. Fortoul
Keyword(s):  
Fuel Cell ◽  
Distributed Environment ◽  
Load Following

scholarly journals A Review of Hydrogen Purification Technologies for Fuel Cell Vehicles

Catalysts ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 393
Author(s):  
Zhemin Du ◽  
Congmin Liu ◽  
Junxiang Zhai ◽  
Xiuying Guo ◽  
Yalin Xiong ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Carbon Emission ◽  
High Efficiency ◽  
Impurity Content ◽  
Fuel Cell Vehicle ◽  
Research Progress ◽  
Hydrogen Purification ◽  
Fuel Cell Vehicles ◽  
Low Carbon

Nowadays, we face a series of global challenges, including the growing depletion of fossil energy, environmental pollution, and global warming. The replacement of coal, petroleum, and natural gas by secondary energy resources is vital for sustainable development. Hydrogen (H2) energy is considered the ultimate energy in the 21st century because of its diverse sources, cleanliness, low carbon emission, flexibility, and high efficiency. H2 fuel cell vehicles are commonly the end-point application of H2 energy. Owing to their zero carbon emission, they are gradually replacing traditional vehicles powered by fossil fuel. As the H2 fuel cell vehicle industry rapidly develops, H2 fuel supply, especially H2 quality, attracts increasing attention. Compared with H2 for industrial use, the H2 purity requirements for fuel cells are not high. Still, the impurity content is strictly controlled since even a low amount of some impurities may irreversibly damage fuel cells’ performance and running life. This paper reviews different versions of current standards concerning H2 for fuel cell vehicles in China and abroad. Furthermore, we analyze the causes and developing trends for the changes in these standards in detail. On the other hand, according to characteristics of H2 for fuel cell vehicles, standard H2 purification technologies, such as pressure swing adsorption (PSA), membrane separation and metal hydride separation, were analyzed, and the latest research progress was reviewed.

Sign in / Sign up

Export Citation Format

Share Document