Comparison of Heat Release and NOx Formation in a DI Diesel Engine Running on DME and Diesel Fuel

2001 ◽  
Author(s):  
Rolf Egnell
Keyword(s):  
Diesel Engine ◽  
Heat Release ◽  
Diesel Fuel ◽  
Nox Formation ◽  
Di Diesel Engine

Combustion heat release analysis of ethanol or n-butanol diesel fuel blends in heavy-duty DI diesel engine

Fuel ◽  
2011 ◽  
Vol 90 (5) ◽  
pp. 1855-1867 ◽  
Author(s):  
D.C. Rakopoulos ◽  
C.D. Rakopoulos ◽  
R.G. Papagiannakis ◽  
D.C. Kyritsis
Keyword(s):  
Diesel Engine ◽  
Heat Release ◽  
Diesel Fuel ◽  
Heavy Duty ◽  
Combustion Heat ◽  
Fuel Blends ◽  
Release Analysis ◽  
Di Diesel Engine

A phenomenological combustion analysis of a dual-fuel natural-gas diesel engine

2016 ◽  
Vol 231 (1) ◽  
pp. 66-83 ◽  
Author(s):  
Shuonan Xu ◽  
David Anderson ◽  
Mark Hoffman ◽  
Robert Prucka ◽  
Zoran Filipi
Keyword(s):  
Diesel Engine ◽  
Natural Gas ◽  
Heat Release ◽  
Diesel Fuel ◽  
Fuel Injection ◽  
Dual Fuel ◽  
Injection Timing ◽  
Heavy Duty ◽  
Engine System ◽  
Wiebe Function

Energy security concerns and an abundant supply of natural gas in the USA provide the impetus for engine designers to consider alternative gaseous fuels in the existing engines. The dual-fuel natural-gas diesel engine concept is attractive because of the minimal design changes, the ability to preserve a high compression ratio of the baseline diesel, and the lack of range anxiety. However, the increased complexity of a dual-fuel engine poses challenges, including the knock limit at a high load, the combustion instability at a low load, and the transient response of an engine with directly injected diesel fuel and port fuel injection of compressed natural gas upstream of the intake manifold. Predictive simulations of the complete engine system are an invaluable tool for investigations of these conditions and development of dual-fuel control strategies. This paper presents the development of a phenomenological combustion model of a heavy-duty dual-fuel engine, aided by insights from experimental data. Heat release analysis is carried out first, using the cylinder pressure data acquired with both diesel-only and dual-fuel (diesel and natural gas) combustion over a wide operating range. A diesel injection timing correlation based on the injector solenoid valve pulse widths is developed, enabling the diesel fuel start of injection to be detected without extra sensors on the fuel injection cam. The experimental heat release trends are obtained with a hybrid triple-Wiebe function for both diesel-only operation and dual-fuel operation. The ignition delay period of dual-fuel operation is examined and estimated with a predictive correlation using the concept of a pseudo-diesel equivalence ratio. A four-stage combustion mechanism is discussed, and it is shown that a triple-Wiebe function has the ability to represent all stages of dual-fuel combustion. This creates a critical building block for modeling a heavy-duty dual-fuel turbocharged engine system.

Explorative Investigation on Cashew Nut Shell Liquid Biodiesel blended with Ethanol and Hydrogen in Direct Injection (DI) Diesel Engine and prediction through Artificial Neural Network

2021 ◽  
Author(s):  
Thanigaivelan V ◽  
Lavanya R
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Direct Injection ◽  
Cashew Nut Shell Liquid ◽  
Single Cylinder ◽  
Direct Injection Diesel Engine ◽  
Cashew Nut ◽  
Di Diesel Engine ◽  
Artificial Neural ◽  
Cashew Nut Shell

Abstract Emission from the DI diesel engine is series setback for environment viewpoint. Intended for that investigates for alternative biofuel is persuaded. The important hitches with the utilization of biofuels and their blends in DI diesel engines are higher emanations and inferior brake-thermal efficiency as associated to sole diesel fuel. In this effort, Cashew nut shell liquid (CNSL) biodiesel, hydrogen and ethanol (BHE) mixtures remained verified in a direct-injection diesel engine with single cylinder to examine the performance and discharge features of the engine. The ethanol remained supplemented 5%, 10% and 15% correspondingly through enhanced CNSL as well as hydrogen functioned twin fuel engine. The experiments done in a direct injection diesel engine with single-cylinder at steadystate conditions above the persistent RPM (1500RPM). Throughout the experiment, emissions of pollutants such as fuel consumption rate (SFC), hydrocarbons (HC), carbon monoxide (CO), nitrogen oxides (NOx) and pressure of the fuel were also measured. cylinders. The experimental results show that, compared to diesel fuel, the braking heat of the biodiesel mixture is reduced by 26.79-24% and the BSFC diminutions with growing addition of ethanol from the CNSL hydrogen mixture. The BTE upsurges thru a rise in ethanol proportion with CNSL hydrogen mixtures. Finally, the optimum combination of ethanol with CNSL hydrogen blends led to the reduced levels of HC and CO emissions with trivial upsurge in exhaust gas temperature and NOx emissions. This paper reconnoiters the routine of artificial neural networks (ANN) to envisage recital, ignition and discharges effect.

scholarly journals Multizone Model Study for DI Diesel Engine Running on Diesel-Ethanol-Biodiesel Blends of High Ethanol Fraction

2018 ◽  
Vol 15 (3) ◽  
pp. 5451-5467 ◽  
Author(s):  
D. B. Hulwan ◽  
S. V. Joshi
Keyword(s):  
Diesel Engine ◽  
Model Prediction ◽  
Diesel Fuel ◽  
Equivalence Ratio ◽  
Air Entrainment ◽  
Biodiesel Blends ◽  
Di Diesel Engine ◽  
Fuel Evaporation ◽  
High Ethanol ◽  
Ethanol Fraction

A multizone combustion model for closed cycle of a DI diesel engine is developed to interpret the experimental investigations on the utilization of diesel-ethanol-biodiesel blends of high ethanol fraction (DEB blends). A computer-based programming for engine process simulation is developed in MATLAB. The model is validated with the experimental values of cylinder pressure and heat release rate. Important information related to fuel injection and combustion inside the combustion chamber, is revealed through the model prediction which is normally difficult to get from the experiments. Model prediction shows that the rate of fuel evaporation is higher for DEB blends, than diesel fuel at any instant of time. The fuel combustion is started late for DEB blends compared to diesel fuel, however, once the combustion is started the burning rate is higher than the diesel fuel. The droplet size (Sauter mean diameter) is decreased for DEB blends which indicate improved fuel atomization. The mean temperature in the zone is significantly lower for DEB blends compared to diesel fuel. The equivalence ratio in the zone is decreased for DEB blends proving that engine runs leaner. The equivalence ratio trend is not uniform as it depends on the combination of the rate of fuel evaporation, rate of air entrainment and rate of burning. Soot density is remarkably decreased, and NOx formation is also drastically reduced for DEB blends at different instant of time. The predictions help to interpret the experimental results for DEB blends and its comparison with diesel fuel.

scholarly journals Eucalyptus Biodiesel as an Alternative to Diesel Fuel: Preparation and Tests on DI Diesel Engine

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Lyes Tarabet ◽  
Khaled Loubar ◽  
Mohand Said Lounici ◽  
Samir Hanchi ◽  
Mohand Tazerout
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Fossil Fuels ◽  
Pressure Rise ◽  
Operating Conditions ◽  
Second Phase ◽  
Oil Consumption ◽  
Unburned Hydrocarbon ◽  
Engine Combustion ◽  
Di Diesel Engine

Nowadays, the increasing oil consumption throughout the world induces crucial economical, security, and environmental problems. As a result, intensive researches are undertaken to find appropriate substitution to fossil fuels. In view of the large amount of eucalyptus trees present in arid areas, we focus in this study on the investigation of using eucalyptus biodiesel as fuel in diesel engine. Eucalyptus oil is converted by transesterification into biodiesel. Eucalyptus biodiesel characterization shows that the physicochemical properties are comparable to those of diesel fuel. In the second phase, a single cylinder air-cooled, DI diesel engine was used to test neat eucalyptus biodiesel and its blends with diesel fuel in various ratios (75, 50, and 25 by v%) at several engine loads. The engine combustion parameters such as peak pressure, rate of pressure rise, and heat release rate are determined. Performances and exhaust emissions are also evaluated at all operating conditions. Results show that neat eucalyptus biodiesel and its blends present significant improvements of carbon monoxide, unburned hydrocarbon, and particulates emissions especially at high loads with equivalent performances to those of diesel fuel. However, the NOx emissions are slightly increased when the biodiesel content is increased in the blend.

Sign in / Sign up

Export Citation Format

Share Document