Thermal Properties of Automotive Polymers II Thermal Conductivity Measurements

2000 ◽  
Author(s):  
Ismat A. Abu-Isa
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Conductivity Measurements

A Self-Heated Thermistor Technique to Measure Effective Thermal Properties From the Tissue Surface

1987 ◽  
Vol 109 (4) ◽  
pp. 330-335 ◽  
Author(s):  
P. A. Patel ◽  
J. W. Valvano ◽  
J. A. Pearce ◽  
S. A. Prahl ◽  
C. R. Denham
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Tissue Blood Flow ◽  
Conductivity Measurements ◽  
Bioheat Equation ◽  
Tissue Conductivity ◽  
Diffusivity Measurements ◽  
Tissue Surface ◽  
Effective Thermal Properties

A microcomputer based instrument to measure effective thermal conductivity and diffusivity at the surface of a tissue has been developed. Self-heated spherical thermistors, partially embedded in an insulator, are used to simultaneously heat tissue and measure the resulting temperature rise. The temperature increase of the thermistor for a given applied power is a function of the combined thermal properties of the insulator, the thermistor, and the tissue. Once the probe is calibrated, the instrument accurately measures the thermal properties of tissue. Conductivity measurements are accurate to 2 percent and diffusivity measurements are accurate to 4 percent. A simplified bioheat equation is used which assumes the effective tissue thermal conductivity is a linear function of perfusion. Since tissue blood flow strongly affects heat transfer, the surface thermistor probe is quite sensitive to perfusion.

scholarly journals Laboratory thermal conductivity measurements on gravel sample

2018 ◽  
Vol 7 (3) ◽  
pp. 67-70
Author(s):  
Antonio Galgaro ◽  
Matteo Cultrera ◽  
Giorgia Dalla Santa ◽  
Fabio Peron
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Heat Exchangers ◽  
Heat Pumps ◽  
Conductivity Measurements ◽  
Ground Source Heat Pumps ◽  
Ground Source

Modern Ground Source Heat Pumps (GSHPs) systems must be designed by taking into account the ground thermal properties, in order to properly plan the capability of the heat pumps to transfer calories through the Ground Source Heat Exchangers (GSHE) to the subsoil (and vice versa). [...]

Thermal Conductivity Measurements on Polycrystalline Silicon Microbridges Using the 3ω Technique

2009 ◽  
Vol 131 (4) ◽  
Author(s):  
Patrick E. Hopkins ◽  
Leslie M. Phinney
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Polycrystalline Silicon ◽  
Microelectromechanical Systems ◽  
Experimental Methods ◽  
Electrical Contacts ◽  
Conductivity Measurements ◽  
Advantages And Disadvantages ◽  
3Ω Technique

The thermal performance of microelectromechanical systems devices is governed by the structure and composition of the constituent materials as well as the geometrical design. With the continued reduction in the characteristic sizes of these devices, experimental determination of the thermal properties becomes more difficult. In this study, the thermal conductivity of polycrystalline silicon (polysilicon) microbridges are measured with the transient 3ω technique and compared with measurements on the same structures using a steady state Joule heating technique. The microbridges with lengths from 200 μm to 500 μm were designed and fabricated using the Sandia National Laboratories SUMMiT V™ surface micromachining process. The advantages and disadvantages of the two experimental methods are examined for suspended microbridge geometries. The differences between the two measurements, which arise from the geometry of the test structures and electrical contacts, are explained by bond pad heating and thermal resistance effects.

scholarly journals Thermal Conductivity Measurements on Polysilicon Microbridges Using the 3-Omega Technique

2008 ◽  
Author(s):  
Patrick E. Hopkins ◽  
Leslie M. Phinney
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Polycrystalline Silicon ◽  
Microelectromechanical Systems ◽  
Boundary Resistance ◽  
Mems Devices ◽  
Conductivity Measurements ◽  
3 Omega ◽  
3Ω Technique

The thermal properties of microelectromechanical systems (MEMS) devices are governed by the structure and composition of the constituent materials as well as the geometrical design. With the continued reduction of the characteristic sizes of these devices, experimental determination of the thermal properties becomes more difficult. In this study, the thermal conductivity of polycrystalline silicon (polysilicon) microbridges are measured with the transient 3ω technique and compared to measurements on the same structures using a steady state joule heating technique. The microbridges with lengths from 200 microns to 500 microns were designed and fabricated using the Sandia National Laboratories SUMMiT™ V surface micromachining process. The differences between the two measurements, which arise from the geometry of the test structures, are explained by bond pad heating and thermal boundary resistance effects.

Thermal Characterization of Carbon-Carbon Composites

2011 ◽  
Author(s):  
Messiha Saad ◽  
Darryl Baker ◽  
Rhys Reaves
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Specific Heat ◽  
Critical Role ◽  
Carbon Composite ◽  
Flash Method ◽  
Carbon Composites ◽  
Energy Storage Devices ◽  
Graphitized Carbon

Thermal properties of materials such as specific heat, thermal diffusivity, and thermal conductivity are very important in the engineering design process and analysis of aerospace vehicles as well as space systems. These properties are also important in power generation, transportation, and energy storage devices including fuel cells and solar cells. Thermal conductivity plays a critical role in the performance of materials in high temperature applications. Thermal conductivity is the property that determines the working temperature levels of the material, and it is an important parameter in problems involving heat transfer and thermal structures. The objective of this research is to develop thermal properties data base for carbon-carbon and graphitized carbon-carbon composite materials. The carbon-carbon composites tested were produced by the Resin Transfer Molding (RTM) process using T300 2-D carbon fabric and Primaset PT-30 cyanate ester. The graphitized carbon-carbon composite was heat treated to 2500°C. The flash method was used to measure the thermal diffusivity of the materials; this method is based on America Society for Testing and Materials, ASTM E1461 standard. In addition, the differential scanning calorimeter was used in accordance with the ASTM E1269 standard to determine the specific heat. The thermal conductivity was determined using the measured values of their thermal diffusivity, specific heat, and the density of the materials.

scholarly journals Testing a Gypsum Composite Based on Raw Gypsum with a Direct Admixture of Paraffin and Polymer to Improve Thermal Properties

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3241
Author(s):  
Krzysztof Powała ◽  
Andrzej Obraniak ◽  
Dariusz Heim
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Phase Change ◽  
Large Scale ◽  
Building Materials ◽  
Residential Buildings ◽  
Energy Performance ◽  
Polymer Content ◽  
Volumetric Heat Capacity

The implemented new legal regulations regarding thermal comfort, the energy performance of residential buildings, and proecological requirements require the design of new building materials, the use of which will improve the thermal efficiency of newly built and renovated buildings. Therefore, many companies producing building materials strive to improve the properties of their products by reducing the weight of the materials, increasing their mechanical properties, and improving their insulating properties. Currently, there are solutions in phase-change materials (PCM) production technology, such as microencapsulation, but its application on a large scale is extremely costly. This paper presents a solution to the abovementioned problem through the creation and testing of a composite, i.e., a new mixture of gypsum, paraffin, and polymer, which can be used in the production of plasterboard. The presented solution uses a material (PCM) which improves the thermal properties of the composite by taking advantage of the phase-change phenomenon. The study analyzes the influence of polymer content in the total mass of a composite in relation to its thermal conductivity, volumetric heat capacity, and diffusivity. Based on the results contained in this article, the best solution appears to be a mixture with 0.1% polymer content. It is definitely visible in the tests which use drying, hardening time, and paraffin absorption. It differs slightly from the best result in the thermal conductivity test, while it is comparable in terms of volumetric heat capacity and differs slightly from the best result in the thermal diffusivity test.

Sign in / Sign up

Export Citation Format

Share Document