scholarly journals Effect of Fiber Weight Ratio and Fiber Modification on Flexural Properties of <i>Posidonia</i>-Polyester Composites

2016 ◽  
Vol 06 (03) ◽  
pp. 69-77 ◽  
Author(s):  
S. Zannen ◽  
L. Ghali ◽  
M. T. Halimi ◽  
M. Ben Hassen
Keyword(s):  
Weight Ratio ◽  
Flexural Properties ◽  
Fiber Modification ◽  
Polyester Composites

scholarly journals Development of Glass/Jute Fibers Reinforced Polyester Composite

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Amit Bindal ◽  
Satnam Singh ◽  
N. K. Batra ◽  
Rajesh Khanna
Keyword(s):  
Weight Ratio ◽  
High Strength ◽  
Flexural Properties ◽  
High Modulus ◽  
Engineering Material ◽  
Jute Fibers ◽  
Glass Fiber Reinforced ◽  
Polyester Composite ◽  
Polyester Composites ◽  
Day By Day

Composites play significant role as engineering material and their use has been increasing day by day due to their specific properties such as high strength to weight ratios, high modulus to weight ratio, corrosion resistance, and wear resistance. In present work, an attempt is made to hybridize the material using synthetic (glass) as well as natural fibres (chemically treated jute), such that to reduce the overall use of synthetic reinforcement, to reduce the overall cost, and to enhance the mechanical properties. All composite specimens with different weight percentages of fibres were manufactured using hand lay-up process and testing was done by using ASTM standards. Experimental results revealed that hybridization of composite with natural and synthetic fibres shows enhanced tensile strength, flexural strength, and impact strength. The content of natural reinforcement was found to be in the range of 25–33.3% for best results. The effect of treated jute on flexural properties was more than that on tensile properties, which was due to greater stiffness of jute fibers. Chemical treatment of jute fibers lowers the water absorption and results were comparable to glass fiber reinforced polyester composites. The addition of jute also reduced the overall cost by 22.18%.

The Effect of Fiber Size on the Mechanical Properties of Bertam/Unsaturated Polyester Composites

2015 ◽  
Vol 761 ◽  
pp. 52-56
Author(s):  
M.H. Norhidayah ◽  
Arep Hambali ◽  
M.Y. Yuhazri
Keyword(s):  
Mechanical Properties ◽  
Fiber Length ◽  
Unsaturated Polyester ◽  
Flexural Modulus ◽  
Flexural Properties ◽  
Fiber Size ◽  
Polyester Composites

The aim of this paper was the effects of different fiber size on tensile and flexural properties. Preparation of thermoset unsaturated polyester reinforced with particle Bertam (Eugeissona tristis) was done by hand layout method. Bertam/polyester composites containing Bertam fiber of different sizes, i.e., 15, 120 and 284 μm were prepared. For each composite, eight specimens were tested to evaluate the mechanical properties. It was found that composite reinforced with Bertam having the shortest fiber length, i.e, 15 μm showed the highest tensile and flexural modulus, which were 204.14 MPa and 1826.78 MPa, respectively.

Mechanical properties of polyester/corn husk fibre composite produced using vacuum infusion technique

2021 ◽  
Vol 29 (9_suppl) ◽  
pp. S1532-S1540
Author(s):  
Shibly Shadik Mir Md ◽  
Ming Yeng Chan ◽  
Seong Chun Koay
Keyword(s):  
Mechanical Properties ◽  
Fibre Composite ◽  
Alkali Treatment ◽  
Flexural Modulus ◽  
Fibre Length ◽  
Flexural Properties ◽  
Vacuum Infusion ◽  
Corn Husk ◽  
Plastic Composite ◽  
Polyester Composites

Issues pertaining to deforestation, environmental pollution and natural wastes are increasing day by day. These issues can be resolved by introducing a new composite material, in which natural waste is used as fibre and as a replacement of wood plastic composite. The different lengths (3, 6 and 9 cm) of corn husk fibre filled polyester composites were produced using the vacuum infusion method. Several mechanical properties of these polyester composites, such as tensile and flexural properties, were evaluated. The results revealed that both the tensile and flexural properties of polyester composites increased with increment of corn husk fibre length from 3 to 6 cm. However, the results decreased for 9 cm of fibre length filled composites. Similar trends were recorded after alkali treatment of the corn husk fibre filled polyester composites. The alkali treatment with sodium hydroxide had improved the tensile strength (33%), Young’s modulus (23%), elongation (14%), flexural strength (42%) and flexural modulus (8.5%) of the polyester/corn husk fibre composites with 6 cm of fibre length by enhancing the mechanical interlocking bonding between treated corn husk fibres and polyester.

Experimental study on effect of fiber length and fiber content on tensile and flexural properties of bamboo fiber/epoxy composite

2019 ◽  
Vol 15 (5) ◽  
pp. 947-957 ◽  
Author(s):  
Giridharan R. ◽  
Raatan V.S. ◽  
Jenarthanan M.P.
Keyword(s):  
Mechanical Properties ◽  
Fiber Length ◽  
Epoxy Composite ◽  
Natural Fibers ◽  
Weight Ratio ◽  
Fiber Content ◽  
Bamboo Fiber ◽  
Flexural Properties ◽  
Fiber Reinforced ◽  
Content Type

Purpose The purpose of this paper is to study the effects of fiber length and content on properties of E-glass and bamboo fiber reinforced epoxy resin matrices. Experiments are carried out as per ASTM standards to find the mechanical properties. Further, fractured surface of the specimen is subjected to morphological study. Design/methodology/approach Composite samples were prepared according to ASTM standards and were subjected to tensile and flexural loads. The fractured surfaces of the specimens were examined directly under scanning electron microscope. Findings From the experiment, it was found that the main factors that influence the properties of composite are fiber length and content. The optimum fiber length and weight ratio are 15 mm and 16 percent, respectively, for bamboo fiber/epoxy composite. Hence, the prediction of optimum fiber length and content becomes important, so that composite can be prepared with best mechanical properties. The investigation revealed the suitability of bamboo fiber as an effective reinforcement in epoxy matrix. Practical implications As bamboo fibers are biodegradable, recyclable, light weight and so on, their applications are numerous. They are widely used in automotive components, aerospace parts, sporting goods and building industry. With this scenario, the obtained result of bamboo fiber reinforced composites is not ignorable and could be of potential use, since it leads to harnessing of available natural fibers and their composites rather than synthetic fibers. Originality/value This work enlists the effect of fiber length and fiber content on tensile and flexural properties of bamboo fiber/epoxy composite, which has not been attempted so far.

An Investigation on Tensile, Compression and Flexural Properties of Natural Fibre Reinforced Polyester Composites

2007 ◽  
Author(s):  
B. F. Yousif ◽  
K. J. Wong ◽  
N. S. M. El-Tayeb
Keyword(s):  
Tensile Strength ◽  
Oil Palm ◽  
Volume Fraction ◽  
Flexural Properties ◽  
Palm Fruit ◽  
Pull Out ◽  
Polyester Composites ◽  
Oil Palm Fibre ◽  
Palm Fibre ◽  
Palm Bunch

In the present work, effects of two types of natural fibres on mechanical properties of polyester composites were investigated at different volume fractions of fibre. Tensile, compression, and flexural properties of oil palm bunch and oil palm fruit fibres reinforced polyester composites were investigated. Additionally, tensile strength of the selected composites was calculated theoretically. Scanning electron microscope was used to observe the fracture mechanism of the specimens. Single fiber pull-out tests were carried out to determine the interfacial shear strength between polyester resin and both types of oil palm fibre. As results, it was found that both types of oil palm fibre enhanced the mechanical performance of polyester composites. At higher volume fraction (≈41%), tensile strength was improved, when polyester reinforced with oil palm fruit fibres, i.e. 2.5 folds improvement in the tensile strength value. Further, experimental tensile strength values of oil palm bunch/polyester composites was found to be less varied compared to theoretical results. Flexural strength of polyester was worsened with oil palm fibres at all of fibre volume fraction.

Sign in / Sign up

Export Citation Format

Share Document