scholarly journals Seismic Evaluation of Reinforced Concrete Frames in the Harsh Environment Using Pushover Analysis

2016 ◽  
Vol 06 (04) ◽  
pp. 685-696
Author(s):  
Mohamed Sobaih ◽  
Ahmed Al Ghazali
Keyword(s):  
Reinforced Concrete ◽  
Pushover Analysis ◽  
Harsh Environment ◽  
Seismic Evaluation ◽  
Concrete Frames ◽  
Reinforced Concrete Frames

scholarly journals Development and Verification of the Capacity Curve for Two Dimensional Reinforced Concrete Moment-Resisting Frames System under Earthquake Loading

2021 ◽  
Vol 27 (6) ◽  
pp. 73-96
Author(s):  
Haider A Abass ◽  
Husain Khalaf Jarallah
Keyword(s):  
Reinforced Concrete ◽  
Plastic Hinge ◽  
Pushover Analysis ◽  
Three Dimensional ◽  
Automatic Identification ◽  
Two Dimensional ◽  
Seismic Evaluation ◽  
Concrete Frames ◽  
Capacity Curves ◽  
Comparison Of The Results

Pushover analysis is an efficient method for the seismic evaluation of buildings under severe earthquakes. This paper aims to develop and verify the pushover analysis methodology for reinforced concrete frames. This technique depends on a nonlinear representation of the structure by using SAP2000 software. The properties of plastic hinges will be defined by generating the moment-curvature analysis for all the frame sections (beams and columns). The verification of the technique above was compared with the previous study for two-dimensional frames (4-and 7-story frames). The former study leaned on automatic identification of positive and negative moments, where the concrete sections and steel reinforcement quantities the source of these moments. The comparison of the results between the two methodologies was carried out in terms of capacity curves. The results of the conducted comparison highlighted essential points. It was included the potential differences between default and user-defined hinge properties in modeling. The effect of the plastic hinge length and the transverse of shear reinforcement on the capacity curves was also observed. Accordingly, it can be considered that the current methodology in this paper more logistic in the representation of two and three-dimensional structures.  

scholarly journals Pushover Analysis on Infill Effects on the Failure Pattern of Reinforced Concrete Frames

2017 ◽  
Vol 7 (4) ◽  
pp. 428 ◽  
Author(s):  
Ning Ning ◽  
Dehu Yu ◽  
Chunwei Zhang ◽  
Shan Jiang
Keyword(s):  
Reinforced Concrete ◽  
Pushover Analysis ◽  
Failure Pattern ◽  
Concrete Frames ◽  
Reinforced Concrete Frames

scholarly journals Seismic Response Modification Factorof Reinforced Concrete Frames Basedon Pushover Analysis

2019 ◽  
Vol 2 (2) ◽  
Author(s):  
Amira Elyamany Mohamed ◽  
Walid A Attia ◽  
Wael M. El-Degwy
Keyword(s):  
Reinforced Concrete ◽  
Seismic Analysis ◽  
Pushover Analysis ◽  
Fundamental Period ◽  
Concrete Frames ◽  
Reinforced Concrete Frames ◽  
Response Modification Factor ◽  
R Factor ◽  
Modification Factor ◽  
The Given

Response modification factor is an essential factor in seismic analysis to provide economic design of reinforced concrete structures. Base shear force is divided by the response modification factor to consider the ability of the structure to dissipate energy through plastic hinges. The current study investigates the effects of changing some parameters on response modification factor (R-factor). Four groups of reinforced concrete frames were studied with different number of bays, number of stories, load pattern, and fundamental period of vibration. All reinforced concrete frames were analyzed using SAP 2000 then the straining actions results were used at specific excel sheets which are developed to design reinforced concrete members according to the Egyptian code of practice ECP-203 and ECP-201. Frames were analyzed by nonlinear static analysis (pushover analysis) using SAP2000. A sum of thirty two systems of frames was analyzed. According to the results, every frame has its unique value of R-factor. Accordingly, many parameters should be mentioned and considered at code to simulate the actual value of R-factor for each frame. Response modification factor is affected by many factors like stiffness, fundamental period of vibration, number of bays, frame height, geometry of the structure, etc. The given values of R-factor at ECP-201 can be considered conservative; as the accurate values of R-factor is higher than the given values.

scholarly journals Behaviour Factor of Ductile Code-Designed Reinforced Concrete Frames

2021 ◽  
Vol 2021 ◽  
pp. 1-18
Author(s):  
Massimiliano Ferraioli
Keyword(s):  
Reinforced Concrete ◽  
Nonlinear Response ◽  
Pushover Analysis ◽  
Nonlinear Dynamic Analysis ◽  
Frame Structures ◽  
Risk Level ◽  
High Ductility ◽  
Concrete Frames ◽  
Reinforced Concrete Frames ◽  
Behaviour Factor

The current generation of seismic design codes is based on a linear elastic force-based approach that includes the nonlinear response of the structure implicitly through a response modification factor (named reduction factor R in American codes or behaviour factor q in European codes). However, the use of a prescribed behaviour factor that is constant for a given structural system may fail in providing structures with the same risk level. In this paper, the behaviour factor of reinforced concrete frame structures is estimated by means of nonlinear static (pushover) and nonlinear incremental dynamic analyses. For this purpose, regular reinforced concrete frames of three, five, seven, and nine storeys designed for high ductility class according to the European and Italian seismic codes are investigated, and realistic input ground motions are selected based on the design spectra. Verified analysis tools and refined structural models are used for nonlinear analysis. Overstrength, redundancy, and ductility response modification factors are estimated, and the effects of some parameters influencing the behaviour factor, including the number of bays and the number of storeys, are evaluated. The results are finally compared with those obtained from a previous paper for steel moment-resisting frames with the same geometry. According to the analysis results, the behaviour factors in the case of pushover analysis are significantly higher than those obtained in the case of nonlinear response history analysis. Thus, according to the pushover analysis, the behaviour factor provided by European and Italian standards seems highly conservative. On the contrary, the more refined nonlinear dynamic analysis shows that the code-prescribed value may be slightly nonconservative for middle-high-rise frame structures due to unfavourable premature collapse mechanisms based on column plastic hinging at the first storey. Thus, some modifications are desirable in local ductility criteria and/or structural detailing of high ductility columns to implicitly ensure that the recommended value of the behaviour factor is conservative.

EXPERIMENTAL LIFE STUDIES OF REINFORCED CONCRETE FRAMES WITH GIRDERS REINFORCED BY INDIRECT REINFORCEMENT

2020 ◽  
Vol 87 (1) ◽  
pp. 92-100 ◽  
Author(s):  
N.V. FEDOROVA ◽  
◽  
FAN DINH GUOK ◽  
NGUYEN THI CHANG ◽  
◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Concrete Frames ◽  
Reinforced Concrete Frames
Sign in / Sign up

Export Citation Format

Share Document