scholarly journals Microstructures, Textures and Mechanical Properties Evolution during Cold Drawing of Pure Mg

2013 ◽  
Vol 01 (02) ◽  
pp. 8-15 ◽  
Author(s):  
Yandang Qiao ◽  
Xin Wang ◽  
Zuyan Liu ◽  
Erde Wang
Keyword(s):  
Mechanical Properties ◽  
Cold Drawing

scholarly journals Effect of Cold Drawing on Mechanical Properties of Biodegradable Fibers

2017 ◽  
Vol 15 (1) ◽  
pp. 70-76 ◽  
Author(s):  
Francesco Paolo La Mantia ◽  
Manuela Ceraulo ◽  
Maria Chiara Mistretta ◽  
Marco Morreale
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Biodegradable Polymers ◽  
Biodegradable Polymer ◽  
Cold Drawing ◽  
Thermal Characterization ◽  
Systematic Investigation ◽  
Thermomechanical Properties ◽  
Polymer Systems ◽  
The Impact

Purpose Biodegradable polymers are currently gaining importance in several fields, because they allow mitigation of the impact on the environment related to disposal of traditional, nonbiodegradable polymers, as well as reducing the utilization of oil-based sources (when they also come from renewable resources). Fibers made of biodegradable polymers are of particular interest, though, it is not easy to obtain polymer fibers with suitable mechanical properties and to tailor these to the specific application. The main ways to tailor the mechanical properties of a given biodegradable polymer fiber are based on crystallinity and orientation control. However, crystallinity can only marginally be modified during processing, while orientation can be controlled, either during hot drawing or cold stretching. In this paper, a systematic investigation of the influence of cold stretching on the mechanical and thermomechanical properties of fibers prepared from different biodegradable polymer systems was carried out. Methods Rheological and thermal characterization helped in interpreting the orientation mechanisms, also on the basis of the molecular structure of the polymer systems. Results and conclusions It was found that cold drawing strongly improved the elastic modulus, tensile strength and thermomechanical resistance of the fibers, in comparison with hot-spun fibers. The elastic modulus showed higher increment rates in the biodegradable systems upon increasing the draw ratio.

Microstructural Evolution and Mechanical Properties during Homogenization and Ageing Treatment of Al-Mg-Si Alloy Wire Cold Drawn

2018 ◽  
Vol 36 ◽  
pp. 60-68 ◽  
Author(s):  
Mokhtar Bayarassou ◽  
Mosbah Zidani ◽  
Hichem Farh
Keyword(s):  
Mechanical Properties ◽  
Electric Energy ◽  
Cold Drawing ◽  
X Ray Diffraction ◽  
Homogenization Treatment ◽  
Characterization Methods ◽  
Alloy Wire ◽  
X Ray ◽  
Deformation Level ◽  
Texture Characterization

The objective of the present investigation is to study the changes in microstructures and mechanical properties during ageing and homogenization treatment of Al-Mg-Si alloy wire cold drawn at the different deformation in ENICAB (Biskra), destined for the transport of electric energy. And also to understand the phase formation during the cold drawing of Al-Mg-Si alloy wires, as well as the combined influence of the plastic deformation level and the influence of aging temperature. Wire section reduction shows a change in microstructure and texture. Characterization methods used in this work is: Optical Microscopy (OM), Scanning Electron Microscope (SEM) and X-ray diffraction.

scholarly journals Effect of Cold Drawing on Electrical and Mechanical Properties of Cu-5 at% Zr Alloy

2007 ◽  
Vol 48 (10) ◽  
pp. 2674-2678 ◽  
Author(s):  
Hisamichi Kimura ◽  
Hiroaki Matsumoto ◽  
Akihisa Inoue
Keyword(s):  
Mechanical Properties ◽  
Cold Drawing ◽  
Zr Alloy
Sign in / Sign up

Export Citation Format

Share Document