scholarly journals Development of a Batch-Type Biogas Digester Using a Combination of Cow Dung, Swine Dung and Poultry Dropping

2019 ◽  
Vol 08 (02) ◽  
pp. 15-31
Author(s):  
Olawale O. Olanrewaju ◽  
Obafemi O. Olubanjo
Keyword(s):  
Cow Dung ◽  
2020 ◽  
pp. 140-148
Author(s):  
Md. Kumail Naqvi ◽  
Mrinal Anthwal ◽  
Ravindra Kumar

Biogas is the product of anaerobic vitiation of biodegradable matter. This paper focuses on the need of alternative and green sources of energy at a household level and how biogas produced from the everyday organic waste has the potential and possibility to replace LPG cylinders at houses, shops etc. and empower us to step towards an eco-friendly future. The purpose this small-scale experiment has been to find the perfect input matter that is easy to acquire and which produces the maximum amount of gas from minimum input and within small period of waste retention. Four different types of input waste material containing different quantities of cow dung and kitchen food waste were studied through individual experimental setups. Waste was mixed and kept at room temperature and the pH and total solid concentration of the samples were recorded on regular intervals. From the experiment it was found that the optimum yield of biogas at a small scale, based on the parameters such as retention period, pH and total solid con-centration can be obtained by the use of food waste form households and kitchens. The exact composition has been discussed in this paper. The energy generated by the small-scale generator has also been compared to that of an LPG cylinder and an LPG replacement model has also been presented.


2014 ◽  
Vol 29 (2) ◽  
pp. 271-279 ◽  
Author(s):  
Mikko Tuominen ◽  
Hannu Teisala ◽  
Janne Haapanen ◽  
Mikko Aromaa ◽  
Jyrki M. Mäkelä ◽  
...  

Abstract Superhydrophobic nanoparticle coating was created on the surface of board using liquid flame spray (LFS). The LFS coating was carried out continuously in ambient conditions without any additional hydrophobization steps. The contact angle of water (CAW) of ZrO2, Al2O3 and TiO2 coating was adjusted reversibly from >150° down to ~10−20° using different stimulation methods. From industrial point of view, the controlled surface wetting has been in focus for a long time because it defines the liquid-solid contact area, and furthermore can enhance the mechanical and chemical bonding on the interface between the liquid and the solid. The used stimulation methods included batch-type methods: artificial daylight illumination and heat treatment and roll-to-roll methods: corona, argon plasma, IR (infra red)- and UV (ultra violet)-treatments. On the contrary to batch-type methods, the adjustment and switching of wetting was done only in seconds or fraction of seconds using roll-to-roll stimulation methods. This is significant in the converting processes of board since they are usually continuous, high volume operations. In addition, the creation of microfluidic patterns on the surface of TiO2 coated board using simple photomasking and surface stimulation was demonstrated. This provides new advantages and possibilities, especially in the field of intelligent printing. Limited durability and poor repellency against low surface tension liquids are presently the main limitations of LFS coatings.


2013 ◽  
Vol 1 (2) ◽  
Author(s):  
Denovis Sambode ◽  
Henneke Pangkey ◽  
Sartje Lantu

The aim of this study was to find out the effect of different organic fertilizers on the population growth of Chydorus sp. This research was conducted at Laboratorium of Nutrition and Food Technology, Faculty of Fishery and Marine Sciences, Sam Ratulangi University, from December, 2012 to January, 2013. The experiment was run in the Completely Randomized Design with 3 treatments and 3 replication. Chydorus sp. was cultured in 9 glass jars with a volume of 1 L each. Three treatments applied in this research included A: medium culture composed of 500ml of water and 50 grams of soil; B: medium culture composed of 500ml of water, 50 grams of soil and 10g of cow dung; C: medium culture composed of 500ml of water, 50 grams of soil and 10g of horse dung. The density of Cydorus sp. in each media was 10 individuals /500 ml water. Observation on the population growth, development of live preys, and water quality parameters was conducted for 20 days period. Data were statistically analized with Analysis of variance. The results showed the highest density of Chydorus sp. was reached by Chydorus cultured in medium with horse manure (2169 individual/500 ml), followed by medium culture with cow manure (1715 individual/500 ml), and the lowest in medium culture with soil which was 1065,33 individual/500 ml. However, Analysis of variances showed that Chydorus population growth were not significantly affected by different culture medium. Keywords: manure, liquid fertilizer, growth, Chydorus sp.


2008 ◽  
Vol 3 (1) ◽  
Author(s):  
Young H. Yoon ◽  
Jae R. Park ◽  
Sang W. Ahn ◽  
Kwang B. Ko ◽  
Kyung J. Min ◽  
...  

Hybrid Activated Sludge Process (HASP) with IMET was developed and applied to an activated sludge process for the advanced nutrient treatment in Korea. The characteristics of nitrogen removal from the HASP were investigated through a kinetic study by batch-type experiment. Online DB analysis produced from the IMET was conducted for the nutrient removal performance in the field demonstration plant treating 10,000 m3/day in G city of Korea. In this paper, we aimed to determine the effect of increasing NHM4+-N load on the specific nitrification rate (SNR) and the specific denitrification rate (SDNR) through a batch-type experiment, and to estimate the net reaction time for the phase-transfer rate using online DB analysis in the HASP operation. Experimental results include: (1) both the nitrification and denitrification followed first-order kinetics; (2) the maximum SNR and SDNR were 4.0301 mgN/gVSS·hr and 2.785 mgN/gVSS·hr, respectively; (3) comparison of reaction rates between nitrification and denitrification from the non-linear regression analysis found that nitrification rate was higher than denitrification.


2020 ◽  
Vol 6 (3) ◽  
pp. 180-191
Author(s):  
Kavitha Chandrasekaran

Background:: In the long run, synthetic tints were found to be harmful to the chemicals. As a result natural tints have come to be used for their many intrinsic values. The main reason being, then availability of local plants as the main source of natural colorants. Their easy availability in the country being zero cost – effective and planted for other purposes are the main reasons for utilizing them as natural tints. Almost all the parts of the plants, namely stem, leaves, fruits, seeds, barks etc. are used for extracting natural colour. In addition, they are antimicrobial antifungal, insect – repellant deodorant, disinfectant having medicinal values. Methods:: Sweet Indrajao leaves were cleaned by washing with water and dried under direct sunlight and ground as fine powder. A fine strainer was used to remove the wastages. After all these processes, 1-kilogram leaves weighed 318 grams. Then, it is put in 75% ethanol 25% water and heated in a breaker which in kept over a water bath for 2 hours. After this, the contents were filtered and kept in a separate beaker. Bleached fleece draperies stained with stain extract were made to become wet and put into different stain baths which contain the required amount of stain extract and water. Acetic acid was added to it after 20 minutes. The fleece drapery was stained for about one hour at 60oC. The draperies thus stained were removed, squeezed, and put to treatment with metal salts without washing. Different metal salts were used for the treatment using 3% of any one of the chemical mordants like alum, stannous chloride, potassium dichromate, ferrous sulphate, nickel sulphate, copper sulphate and natural mordants such as myrobolan, turmeric, cow dung, Banana sap juice at 60oC for 30 minutes with MLR of 1:30. The stained draperies were washed repeatedly in all the three methods in water and dried in air. At last, the stained draperies were put to soap with soap solution at 60oC for 10 minutes. The draperies were repeatedly washed in water and dried under the sun. Results:: Sweet Indrajao leaves discharged colour easily in alcoholic water. The fleece draperies were stained with chemical and natural mordants. It was observed that the stain uptake was found to be good in post-mordanting method. Ultrasonication has clearly improved the stainability of the draperies at pH 3 and 3.5 values. The pH decreases the stain ability under both Conventional and Ultrasonic conditions. The colour strength increases with an increase in staining temperature in both cases of US and CH methods. Conclusion:: Sweet Indrajao.L has been found to have good ultrasonic potential as a stain plant. The stain uptake as well as the fastness properties of the fleece drapery were found to enhance when metal mordant was used in conjugation with ultra-sonication for the extract of Sweet Indrajao. It was also found that the enhancement of staining ability was better without mordant draperies. The dye extract showed good antibacterial activity against the three bacterial pathogens. Among the three bacterial pathogens, dye extract showed more effective against Escherichia coli pathogens and dye extract showed more effective against Aspergillus pathogens. Hence, the ultrasonic method of drapery staining may be appropriate and beneficial for society at large in future.


Sign in / Sign up

Export Citation Format

Share Document