Numerical Study of Speciment Subjected to Shear Compression Stress Field

2009 ◽  
Author(s):  
J. Davies
Keyword(s):  
Stress Field ◽  
Numerical Study ◽  
Compression Stress

scholarly journals Thermoelastic analysis of FGM hollow cylinder for variable parameters and temperature distributions using FEM

2020 ◽  
Vol 9 (1) ◽  
pp. 256-264
Author(s):  
Dinkar Sharma ◽  
Ramandeep Kaur
Keyword(s):  
Stress Field ◽  
Hollow Cylinder ◽  
Numerical Study ◽  
Axial Stress ◽  
Circumferential Stress ◽  
Functionally Graded ◽  
Gradient Index ◽  
Variable Parameters ◽  
Graded Material ◽  
Governing Differential Equation

AbstractThis paper presents, numerical study of stress field in functionally graded material (FGM) hollow cylinder by using finite element method (FEM). The FGM cylinder is subjected to internal pressure and uniform heat generation. Thermoelastic material properties of FGM cylinder are assumed to vary along radius of cylinder as an exponential function of radius. The governing differential equation is solved numerically by FEM for isotropic and anistropic hollow cylinder. Additionally, the effect of material gradient index (β) on normalized radial stresses, normalized circumferential stress and normalized axial stress are evaluated and shown graphically. The behaviour of stress versus normalized radius of cylinder is plotted for different values of Poisson’s ratio and temperature. The graphical results shown that stress field in FGM cylinder is influenced by some of above mentioned parameters.

Variation for Soil Stress on CPTU Model Test

2010 ◽  
Vol 44-47 ◽  
pp. 2597-2601
Author(s):  
Yan Chun Tang ◽  
Gao Tou Meng
Keyword(s):  
Stress Field ◽  
Maximum Stress ◽  
Clay Soil ◽  
Cell Layer ◽  
Compression Stress ◽  
Soil Pressure ◽  
Piezocone Penetration Test ◽  
Main Stress ◽  
Saturated Clay ◽  
Soil Stress

Through a series of Piezocone Penetration Test (CPTU) model tests with saturated clay soil, by CPTU probe penetrating soil stress measured by soil pressure mini-cells embedded into soil has been acquired, the variation rules of soil stress by penetrating has been analyzed, the results show that with probe close to the second cell layer, the stress measured by the cells has been increased rapidly; when probe has arrived at the position of the second cell layer, the maximum stress value has been attained; and with probe away from the second cell layer, the stress value has been decreased rapidly. Based on the achieved soil stress value, the axial and radial subsidiary stress field causing by penetrating has been acquired, the conclusions can be obtained that the main stress style of the axial subsidiary stress is compression stress, around the probe the highest stress field has been occurred; the stress style of the radial subsidiary stress is compression stress, this phenomenon shows that by penetrating the compaction effect of the soil around the probe has been created; during the course of penetrating, the radial subsidiary stress is less than the axial subsidiary stress obviously. The achieved result can provide a foundation for further study for CPTU mechanism.

A Numerical Study on the Redistribution of Residual Stress After Machining

2017 ◽  
Author(s):  
Kunyang Lin ◽  
Wenhu Wang ◽  
Ruisong Jiang ◽  
Yifeng Xiong
Keyword(s):  
Residual Stress ◽  
Stress Field ◽  
Residual Stresses ◽  
Numerical Study ◽  
Cutting Speed ◽  
Machining Process ◽  
Stress Profile ◽  
Residual Stress Field ◽  
Machining Processes ◽  
Residual Stress Profile

Machining induced residual stresses have an important effect on the surface integrity. Effects of various factors on the distribution of residual stress profiles induced by different machining processes have been investigated by many researchers. However, the initial residual, as one of the important factor that affect the residual stress profile, is always been ignored. In this paper, the residual stress field induced by the quenching process is simulated by the FEM software as the initial condition. Then the initial residual stress field is used to study the residual stress redistribution after the machining process. The influence of initial stress on the stress formation is carried out illustrating with the mechanical and thermal loads during machining processes. The effects of cutting speed on the distribution of residual stress profile are also discussed. These results are helpful to understand how initial residual stresses are redistributed during machining better. Furthermore, the results in the numerical study can be used to explain the machining distortion problem caused by residual stress in the further work.

The Effect of Strength Mis-Match and Residual Stress in ECA of Girth Welds With Internal Circumferential Cracks

2009 ◽  
Author(s):  
Ali Mirzaee Sisan ◽  
Afshin Motarjemi
Keyword(s):  
Residual Stress ◽  
Stress Field ◽  
Driving Forces ◽  
Numerical Study ◽  
Welding Process ◽  
Detailed Comparison ◽  
Weld Strength ◽  
Residual Stress Field ◽  
Girth Welds ◽  
Welded Pipe

A numerical study was carried out to quantify the effect of a residual stress field on subsequent fracture behaviour of a girth welded pipe with an internal circumferential long crack when subjected to high applied strain loading. In order to introduce an initial residual stress field similar to a welding process in a pipe, a quenching process was numerically simulated and associated residual stress profiles were modified and mapped into the finite element (FE) models. A detailed comparison between the crack driving force for various cases with and without residual stress and weld strength mismatch was carried out for cases under a high plastic deformation regime. The BS7910 procedure was also used to predict crack driving forces using its current assumption of interaction of residual stress with primary loads. The results obtained from the FE analyses were compared with the BS7910 predictions.

Influence of Boundary Conditions on Higher Order Terms of Near-Crack-Tip Stress Field in a WST Specimen

2011 ◽  
Vol 488-489 ◽  
pp. 399-402 ◽  
Author(s):  
Václav Veselý ◽  
Lucie Šestáková ◽  
Stanislav Seitl
Keyword(s):  
Stress Field ◽  
Boundary Conditions ◽  
Numerical Study ◽  
Higher Order ◽  
Wedge Splitting Test ◽  
Splitting Test ◽  
Higher Order Terms ◽  
Test Geometry ◽  
Finite Element Package ◽  
Stress And Deformation

A precise description of the stress and deformation fields in a cracked body is provided using multi-parameter fracture mechanics based on the approximation of the fields by means of the Williams’ power series. This paper presents a detailed analysis of the stress field in a wedge-splitting test geometry specimen aimed at the calculation of coefficients of the higher order terms (up to 14) of the Williams’ expansion. The numerical study is conducted with the use of a conventional finite element package; however, for processing of the results an over-deterministic method is employed. Special attention is paid to the influence of boundary conditions of the test geometry on the values of the coefficients of the higher order terms of the Williams’ series. The results are compared to data from the literature; a strong effect of the boundary conditions is observed.

Numerical Study on Elastic-Plastic Stress Field Near the Cooling Holes of Nickel-Based Single Crystal Air-Cooled Blades

2006 ◽  
Vol 324-325 ◽  
pp. 563-566 ◽  
Author(s):  
Qing Min Yu ◽  
Zhu Feng Yue ◽  
Yong Shou Liu
Keyword(s):  
Shear Stress ◽  
Stress Field ◽  
Numerical Study ◽  
Von Mises Stress ◽  
Shear Stresses ◽  
Slip Systems ◽  
Stress Distributions ◽  
Elastic Plastic ◽  
Von Mises ◽  
Plastic Stress

In this paper, a plate containing a central hole was used to simulate gas turbine blade with cooling hole. Numerical calculations based on crystal plasticity theory have been performed to study the elastic-plastic stress field near the hole under tension. Two crystallographic orientations [001] and [111] were considered. The distributions of resolved shear stresses and strains of the octahedral slip systems {110}<112> were calculated. The results show that the crystallographic orientation has remarkable influence on both von Mises stress and resolved shear stress distributions. The resolved shear stress distributions around the hole are different between the two orientations, which lead to the different activated slip systems. So the deformed shape of the hole in [001] orientation differs from that in [111] orientation.

scholarly journals Numerical Study on the Elastic Deformation and the Stress Field of Brittle Rocks under Harmonic Dynamic Load

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 851
Author(s):  
Siqi Li ◽  
Shenglei Tian ◽  
Wei Li ◽  
Xin Ling ◽  
Marcin Kapitaniak ◽  
...  
Keyword(s):  
Stress Field ◽  
Numerical Simulations ◽  
Elastic Deformation ◽  
Fatigue Damage ◽  
Dynamic Load ◽  
Static Load ◽  
Numerical Study ◽  
Rock Fracture ◽  
Dynamic Loads ◽  
Brittle Rocks

In order to study the deformation displacement and the stress field of brittle rocks under harmonic dynamic loading, a series of systematic numerical simulations are conducted in this paper. A 3D uniaxial compression simulation is carried out to calibrate and determine the property parameters of sandstone and a model of the cylindrical indenter intruding the rock is proposed to analyze the process of elastic deformation. Four main parameters are taken into account, namely the position on the rock, the frequency and the amplitude of dynamic load, the type of indenter and the loading conditions (static and static-dynamic). Based on the analysis undertaken, it can be concluded that both of the deformation displacement and stress field of the rock change in a harmonic manner under the static-dynamic loads. The frequency and the amplitude of harmonic dynamic load determine the period and the magnitude of the rock response, respectively. In addition, the existence of harmonic dynamic load can aggravate the fatigue damage of the rock and allow a reduction in static load. Our investigations confirm that the static-dynamic loads are more conducive to rock fracture than static load.

scholarly journals Numerical study of the stress field during crack growth in porous rocks

2015 ◽  
Vol 1 (3-4) ◽  
pp. 91-101 ◽  
Author(s):  
Yongming Yang ◽  
Yang Ju ◽  
Yeheng Sun ◽  
Dongxiao Zhang
Keyword(s):  
Stress Field ◽  
Crack Growth ◽  
Numerical Study ◽  
Porous Rocks
Sign in / Sign up

Export Citation Format

Share Document