Parametric Instability Analysis of Stringer Stiffened Circular Cylindrical Shells under Axial Compression and External Hydrostatic Pressure

2009 ◽  
Author(s):  
M.R. Khedmati ◽  
M.J. Mazaheri ◽  
A.R. Karimi
Keyword(s):  
Hydrostatic Pressure ◽  
Axial Compression ◽  
Cylindrical Shells ◽  
Parametric Instability ◽  
External Hydrostatic Pressure ◽  
Instability Analysis ◽  
Circular Cylindrical Shells

Buckling of Circular Cylindrical Shells Using a Displacement Function

1974 ◽  
Vol 96 (4) ◽  
pp. 1322-1327
Author(s):  
Shun Cheng ◽  
C. K. Chang
Keyword(s):  
Boundary Conditions ◽  
Axial Compression ◽  
Cylindrical Shells ◽  
External Pressure ◽  
Displacement Function ◽  
Combined Loading ◽  
Trial Solution ◽  
Governing Differential Equation ◽  
Circular Cylindrical Shells ◽  
The Stability

The buckling problem of circular cylindrical shells under axial compression, external pressure, and torsion is investigated using a displacement function φ. A governing differential equation for the stability of thin cylindrical shells under combined loading of axial compression, external pressure, and torsion is derived. A method for the solutions of this equation is also presented. The advantage in using the present equation over the customary three differential equations for displacements is that only one trial solution is needed in solving the buckling problems as shown in the paper. Four possible combinations of boundary conditions for a simply supported edge are treated. The case of a cylinder under axial compression is carried out in detail. For two types of simple supported boundary conditions, SS1 and SS2, the minimum critical axial buckling stress is found to be 43.5 percent of the well-known classical value Eh/R3(1−ν2) against the 50 percent of the classical value presently known.

scholarly journals Solving nonlinear stability problem of imperfect functionally graded circular cylindrical shells under axial compression by Galerkin's method

2012 ◽  
Vol 34 (3) ◽  
pp. 139-156 ◽  
Author(s):  
Dao Van Dung ◽  
Le Kha Hoa
Keyword(s):  
Axial Compression ◽  
Nonlinear Stability ◽  
Volume Fraction ◽  
Cylindrical Shells ◽  
Geometrical Nonlinearity ◽  
Functionally Graded ◽  
Galerkin’S Method ◽  
Galerkin's Method ◽  
Method Effects ◽  
Circular Cylindrical Shells

This paper presents an analytical approach to analyze the nonlinear stability of thin closed circular cylindrical shells under axial compression with material properties varying smoothly along the thickness in the power and exponential distribution laws. Equilibrium and compatibility equations are obtained by using Donnel shell theory taking into account the geometrical nonlinearity in von Karman and initial geometrical imperfection.  Equations to find the critical load and the load-deflection curve are established by Galerkin's method. Effects of buckling modes, of imperfection, of dimensional parameters and of volume fraction indexes to buckling loads and postbuckling load-deflection curves of cylindrical shells are investigated. In case of perfect cylindrical shell, the present results coincide with the ones of the paper  [13] which were solved by Ritz energy method.

Axisymmetric Buckling of Ring-Stiffened Cylindrical Shells Under Axial Compression

1965 ◽  
Vol 9 (02) ◽  
pp. 66-73
Author(s):  
Thein Wah
Keyword(s):  
Finite Difference ◽  
Axial Compression ◽  
Torsional Rigidity ◽  
Cylindrical Shells ◽  
Axisymmetric Buckling ◽  
Circular Cylindrical Shells ◽  
Stiffened Cylindrical Shells

The possibility of axisymmetric modes of buckling of ring-stiffened circular cylindrical shells under axial compression is investigated by the use of finite-difference calculus. The theory accounts for both the extensional as well as torsional rigidity of the rings.

Postbuckling Analyses of Elastic Cylindrical Shells Under Axial Compression

2009 ◽  
Author(s):  
Takaya Kobayashi ◽  
Yasuko Mihara
Keyword(s):  
Critical Load ◽  
Axial Compression ◽  
Cylindrical Shells ◽  
General Purpose ◽  
Experimental Results ◽  
Ideal Condition ◽  
Postbuckling Behavior ◽  
Mode Shift ◽  
Applied Loading ◽  
Circular Cylindrical Shells

In designing a modern lightweight structure, it is of technical importance to assure its safety against buckling under the applied loading conditions. For this issue, the determination of the critical load in an ideal condition is not sufficient, but it is further required to clarify the postbuckling behavior, that is, the behavior of the structure after passing through the critical load. One of the reasons is to estimate the effect of practically unavoidable imperfections on the critical load, and the second reason is to evaluate the ultimate strength to exploit the load-carrying capacity of the structure. For the buckling problem of circular cylindrical shells under axial compression, a number of experimental and theoretical studies have been made by many researchers. In the case of the very thin shell that exhibits elastic buckling, experimental results show that after the primary buckling, secondary buckling takes place accompanying successive reductions in the number of circumferential waves at every mode shift on systematic (one-by-one) basis. In this paper, we traced this successive buckling of circular cylindrical shells using the latest in general-purpose FEM technology. We carried out our studies with three approaches: the arc-length method (the modified Riks method); the static stabilizing method with the aid of (artificial) damping especially, for the local instability; and the explicit dynamic procedure. The studies accomplished the simulation of successive buckling following unstable paths, and showed agreement with the experimental results.

Buckling of Angle-Ply Laminated Circular Cylindrical Shells

1979 ◽  
Vol 46 (1) ◽  
pp. 233-234 ◽  
Author(s):  
Y. Hirano
Keyword(s):  
Axial Compression ◽  
Cylindrical Shells ◽  
Buckling Stress ◽  
Circular Cylindrical Shells

This Note presents closed-farm solutions for axisymmetrical and axially unsymmetrical buckling of angle-ply laminated circular cylindrical shells under axial compression. The axisymmetrical and axially unsymmetrical buckling stress are found to be different from each other, and the best lamination angles which give the highest buckling stress are obtained.

Sign in / Sign up

Export Citation Format

Share Document