Prediction of the Two-Scale Buckling Response of Sandwich Beams under In-Plane Compression

2009 ◽  
Author(s):  
L. Léotoing ◽  
S. Drapier ◽  
A. Vautrin
Keyword(s):  
Sandwich Beams ◽  
Plane Compression

Analysis of Interface Deformation of Steel-Concrete-Steel Sandwich Beam

2012 ◽  
Vol 525-526 ◽  
pp. 357-360
Author(s):  
Pei Xiu Xia ◽  
Guang Ping Zou ◽  
Zhong Liang Chang
Keyword(s):  
Sandwich Beam ◽  
Analytical Models ◽  
Sandwich Beams ◽  
Interface Deformation ◽  
Simply Supported ◽  
Interface Slip ◽  
Steel Panels ◽  
Uniformly Distributed Loads ◽  
Relationship Of ◽  
The Relationship

The effect of the interface slip is neglected in most studies on calculating deflection of sandwich beams. By taking a simply supported sandwich beams under uniformly distributed loads as an example, simplified analytical models of the interface slip are established, and corresponding clculation formulas of interface slip between steel panels and concrete and section curvatures are derived. The formula for deflection of sandwich beams are then presented. This formula reflects the relationship of influence each other between the interface slip and deflection.

Experimental and numerical investigation of corroded steel columns subjected to in-plane compression and bending

2020 ◽  
Vol 151 ◽  
pp. 106735 ◽  
Author(s):  
Zongxing Zhang ◽  
Shanhua Xu ◽  
Biao Nie ◽  
Rou Li ◽  
Zhen Xing
Keyword(s):  
Numerical Investigation ◽  
Steel Columns ◽  
Plane Compression

Static and dynamic response of sandwich beams with lattice and pantographic cores

2021 ◽  
pp. 109963622110338
Author(s):  
Yury Solyaev ◽  
Arseniy Babaytsev ◽  
Anastasia Ustenko ◽  
Andrey Ripetskiy ◽  
Alexander Volkov
Keyword(s):  
Mechanical Performance ◽  
Lattice Structure ◽  
Unit Length ◽  
Experimental Tests ◽  
Plane Geometry ◽  
Sandwich Beams ◽  
Static Tests ◽  
Three Point Bending ◽  
The Core ◽  
The Impact

Mechanical performance of 3d-printed polyamide sandwich beams with different type of the lattice cores is investigated. Four variants of the beams are considered, which differ in the type of connections between the elements in the lattice structure of the core. We consider the pantographic-type lattices formed by the two families of inclined beams placed with small offset and connected by stiff joints (variant 1), by hinges (variant 2) and made without joints (variant 3). The fourth type of the core has the standard plane geometry formed by the intersected beams lying in the same plane (variant 4). Experimental tests were performed for the localized indentation loading according to the three-point bending scheme with small span-to-thickness ratio. From the experiments we found that the plane geometry of variant 4 has the highest rigidity and the highest load bearing capacity in the static tests. However, other three variants of the pantographic-type cores (1–3) demonstrate the better performance under the impact loading. The impact strength of such structures are in 3.5–5 times higher than those one of variant 4 with almost the same mass per unit length. This result is validated by using numerical simulations and explained by the decrease of the stress concentration and the stress state triaxiality and also by the delocalization effects that arise in the pantographic-type cores.

Finite element bending analysis of symmetric and non-symmetric functionally graded sandwich beams using a novel parabolic shear deformation theory

2021 ◽  
pp. 146442072110050
Author(s):  
Mohamed-Ouejdi Belarbi ◽  
Abdelhak Khechai ◽  
Aicha Bessaim ◽  
Mohammed-Sid-Ahmed Houari ◽  
Aman Garg ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Shear Deformation ◽  
Transverse Shear ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Element Model ◽  
Beam Element ◽  
Functionally Graded ◽  
Sandwich Beams

In this paper, the bending behavior of functionally graded single-layered, symmetric and non-symmetric sandwich beams is investigated according to a new higher order shear deformation theory. Based on this theory, a novel parabolic shear deformation function is developed and applied to investigate the bending response of sandwich beams with homogeneous hardcore and softcore. The present theory provides an accurate parabolic distribution of transverse shear stress across the thickness and satisfies the zero traction boundary conditions on the top and bottom surfaces of the functionally graded sandwich beam without using any shear correction factors. The governing equations derived herein are solved by employing the finite element method using a two-node beam element, developed for this purpose. The material properties of functionally graded sandwich beams are graded through the thickness according to the power-law distribution. The predictive capability of the proposed finite element model is demonstrated through illustrative examples. Four types of beam support, i.e. simply-simply, clamped-free, clamped–clamped, and clamped-simply, are used to study how the beam deflection and both axial and transverse shear stresses are affected by the variation of volume fraction index and beam length-to-height ratio. Results of the numerical analysis have been reported and compared with those available in the open literature to evaluate the accuracy and robustness of the proposed finite element model. The comparisons with other higher order shear deformation theories verify that the proposed beam element is accurate, presents fast rate of convergence to the reference results and it is also valid for both thin and thick functionally graded sandwich beams. Further, some new results are reported in the current study, which will serve as a benchmark for future research.

Innovative flitch sandwich beams with steel core under four-point bending

2021 ◽  
Vol 233 ◽  
pp. 111724
Author(s):  
Amin Nabati ◽  
Tohid Ghanbari-Ghazijahani ◽  
Hamid R. Valipour
Keyword(s):  
Sandwich Beams ◽  
Steel Core ◽  
Four Point Bending

Focal plane compression 128x128 image sensor based on column parallel architecture

1998 ◽  
Author(s):  
Takayuki Hamamoto ◽  
Yasuhiro Ohtsuka ◽  
Kiyoharu Aizawa
Keyword(s):  
Focal Plane ◽  
Parallel Architecture ◽  
Image Sensor ◽  
Plane Compression
Sign in / Sign up

Export Citation Format

Share Document