scholarly journals Periodic expansiveness of smooth surface diffeomorphisms and applications

2019 ◽  
Vol 22 (2) ◽  
pp. 413-454 ◽  
Author(s):  
David Burguet
Keyword(s):  
Smooth Surface ◽  
Surface Diffeomorphisms

Three-Dimensional Structure of Rotavirus-Fab Complex

1990 ◽  
Vol 48 (1) ◽  
pp. 238-239
Author(s):  
B.V.V. Prasad ◽  
E. Marietta ◽  
J.W. Burns ◽  
M.K. Estes ◽  
W. Chiu
Keyword(s):  
Image Processing ◽  
Smooth Surface ◽  
Three Dimensional ◽  
Outer Shell ◽  
Dimensional Structure ◽  
Structural Studies ◽  
Cell Penetration ◽  
Electron Cryomicroscopy ◽  
Image Processing Techniques ◽  
Processing Techniques

Rotaviruses are spherical, double-shelled particles. They have been identified as a major cause of infantile gastroenteritis worldwide. In our earlier studies we determined the three-dimensional structures of double-and single-shelled simian rotavirus embedded in vitreous ice using electron cryomicroscopy and image processing techniques to a resolution of 40Å. A distinctive feature of the rotavirus structure is the presence of 132 large channels spanning across both the shells at all 5- and 6-coordinated positions of a T=13ℓ icosahedral lattice. The outer shell has 60 spikes emanating from its relatively smooth surface. The inner shell, in contrast, exhibits a bristly surface made of 260 morphological units at all local and strict 3-fold axes (Fig.l).The outer shell of rotavirus is made up of two proteins, VP4 and VP7. VP7, a glycoprotein and a neutralization antigen, is the major component. VP4 has been implicated in several important functions such as cell penetration, hemagglutination, neutralization and virulence. From our earlier studies we had proposed that the spikes correspond to VP4 and the rest of the surface is composed of VP7. Our recent structural studies, using the same techniques, with monoclonal antibodies specific to VP4 have established that surface spikes are made up of VP4.

scholarly journals Corrigendum to: Response to “Clarification About ‘Expert Consensus on the Use of a New Bioengineered, Cell-Friendly, Smooth Surface Breast Implant’”

2020 ◽  
Author(s):  
Marcos Sforza ◽  
Dennis C Hammond ◽  
Giovanni Botti ◽  
Per Hedén ◽  
Manuel Chacón Quirós ◽  
...  
Keyword(s):  
Smooth Surface ◽  
Breast Implant ◽  
Expert Consensus

scholarly journals Textile Electrodes: Influence of Knitting Construction and Pressure on the Contact Impedance

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1578
Author(s):  
Luisa Euler ◽  
Li Guo ◽  
Nils-Krister Persson
Keyword(s):  
Smooth Surface ◽  
Research Field ◽  
Uneven Surface ◽  
Contact Impedance ◽  
Dry Electrodes ◽  
Textile Electrodes ◽  
Human Forearm ◽  
Wet Condition ◽  
Electrode Contact ◽  
Influencing Parameters

Textile electrodes, also called textrodes, for biosignal monitoring as well as electrostimulation are central for the emerging research field of smart textiles. However, so far, only the general suitability of textrodes for those areas was investigated, while the influencing parameters on the contact impedance related to the electrode construction and external factors remain rather unknown. Therefore, in this work, six different knitted electrodes, applied both wet and dry, were compared regarding the influence of specific knitting construction parameters on the three-electrode contact impedance measured on a human forearm. Additionally, the influence of applying pressure was investigated in a two-electrode setup using a water-based agar dummy. Further, simulation of an equivalent circuit was used for quantitative evaluation. Indications were found that the preferred electrode construction to achieve the lowest contact impedance includes a square shaped electrode, knitted with a high yarn density and, in the case of dry electrodes, an uneven surface topography consisting of loops, while in wet condition a smooth surface is favorable. Wet electrodes are showing a greatly reduced contact impedance and are therefore to be preferred over dry ones; however, opportunities are seen for improving the electrode performance of dry electrodes by applying pressure to the system, thereby avoiding disadvantages of wet electrodes with fluid administration, drying-out of the electrolyte, and discomfort arising from a “wet feeling”.

scholarly journals Fabrication and characterization of hexadecyl acrylate cross-linked phase change microspheres

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 69-75
Author(s):  
Haoran Yun ◽  
Xingxiang Zhang
Keyword(s):  
Phase Change ◽  
Smooth Surface ◽  
Bone Conduction ◽  
Cross Linking ◽  
Gravimetric Analysis ◽  
Orthopedic Implant ◽  
Thermal Gravimetric ◽  
Fabrication And Characterization ◽  
Fast Release

AbstractMicrospheres with phase change properties were fabricated by polymerization of hexadecyl acrylate (HA) and different cross-linking agents. The samples were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA). The results show that, the samples that added cross-linking agents have a smooth surface and the latent heat of them is different. The experiments show that all of the cross-linked copolymer shells can be made into temperature controlled release microspheres. These materials can be potentially applied in the field of thermal energy storage. β-tricalcium phosphate was encapsulated in microspheres to obtain one with a fast release effect. It will effectively promote bone conduction when these microspheres were implanted into a bone defect. This microsphere can be used for orthopedic implant or coating of instrument in the future.

scholarly journals The set of points with Markovian symbolic dynamics for non-uniformly hyperbolic diffeomorphisms

2020 ◽  
pp. 1-26
Author(s):  
SNIR BEN OVADIA
Keyword(s):  
Symbolic Dynamics ◽  
Full Measure ◽  
Probability Measures ◽  
Positive Entropy ◽  
Surface Diffeomorphisms ◽  
Srb Measures ◽  
Hyperbolic Diffeomorphisms ◽  
Set Of Points ◽  
Math Phys ◽  
Homoclinic Classes

Abstract The papers [O. M. Sarig. Symbolic dynamics for surface diffeomorphisms with positive entropy. J. Amer. Math. Soc.26(2) (2013), 341–426] and [S. Ben Ovadia. Symbolic dynamics for non-uniformly hyperbolic diffeomorphisms of compact smooth manifolds. J. Mod. Dyn.13 (2018), 43–113] constructed symbolic dynamics for the restriction of $C^r$ diffeomorphisms to a set $M'$ with full measure for all sufficiently hyperbolic ergodic invariant probability measures, but the set $M'$ was not identified there. We improve the construction in a way that enables $M'$ to be identified explicitly. One application is the coding of infinite conservative measures on the homoclinic classes of Rodriguez-Hertz et al. [Uniqueness of SRB measures for transitive diffeomorphisms on surfaces. Comm. Math. Phys.306(1) (2011), 35–49].

scholarly journals Air mediates the impact of a compliant hemisphere on a rigid smooth surface

Soft Matter ◽  
2021 ◽  
Author(s):  
Siqi Zheng ◽  
Sam Dillavou ◽  
John M. Kolinski
Keyword(s):  
Elastic Body ◽  
Elastic Properties ◽  
Impact Velocity ◽  
Solid Surface ◽  
High Speed ◽  
Smooth Surface ◽  
High Speed Imaging ◽  
The Impact ◽  
Rigid Smooth

When a soft elastic body impacts upon a smooth solid surface, the intervening air fails to drain, deforming the impactor. High-speed imaging with the VFT reveal rich dynamics and sensitivity to the impactor's elastic properties and the impact velocity.

Effect of Sr Doping on Structure and Emittance of La1-xSrxMnO3 Smart Thermal Control Films

2014 ◽  
Vol 602-603 ◽  
pp. 902-905
Author(s):  
Yong Jun Shen ◽  
Chuan Bin Wang ◽  
Ling Li ◽  
Qiang Shen ◽  
Lian Meng Zhang
Keyword(s):  
Thin Film ◽  
Smooth Surface ◽  
Pulsed Laser ◽  
Double Exchange ◽  
Thermal Control ◽  
Laser Deposition ◽  
Lanthanum Manganite ◽  
Infrared Emissivity ◽  
Control Material ◽  
Double Exchange Interaction

Sr-doped lanthanum manganite (La1-xSrxMnO3) is characteristic of thermochromic, which can act as a smart thermal control material used in the variable-emittance devices. In the present study, La1-xSrxMnO3 thin films were prepared on MgO(100) substrates by pulsed laser deposition, and the effect of Sr-doping (x = 0 ~ 0.4) on the structure and infrared emissivity was investigated. Single-phased La1-xSrxMnO3 films with (100)-orientation were obtained, which showed a dense texture with smooth surface. The ratio of Mn4+/Mn3+ in the films was increased with increasing Sr doping, leading to the enhancement in double-exchange interaction and electrical conductivity. As a result, the phase transition from metal to insulator was observed with the increasing of test temperature. For the La0.8Sr0.2MnO3 thin film, a large value of emittance (De = 0.28) was obtained, indicating good variable-emittance by appropriate Sr doping.

Studies on Magnetron-Sputtered NiO/Si3N4 Thin Films

2018 ◽  
Vol 17 (03) ◽  
pp. 1760039
Author(s):  
K. M. Dhanisha ◽  
M. Manoj Christopher ◽  
M. Abinaya ◽  
P. Deepak Raj ◽  
M. Sridharan
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Smooth Surface ◽  
Deposition Time ◽  
Si Substrate ◽  
X Ray ◽  
Coating Time ◽  
Deposited Films ◽  
Nio Films ◽  
Scanning Electron

The present work deals with NiO/Si3N4 layers formed by depositing nickel oxide (NiO) thin films over silicon nitrate (Si3N[Formula: see text] thin films. NiO films were coated on Si3N4-coated Si substrate using magnetron sputtering method by changing duration of coating time and were analyzed using X-ray diffractometer, field emission-scanning electron microscopy, UV–Vis spectrophotometer and four-point probe method to study the influence of thickness on physical properties. Crystallinity of the deposited films increases with increase in thickness. All films exhibited spherical-like structure, and with increase in deposition time, grains are coalesced to form smooth surface morphology. The optical bandgap of NiO films was found to decrease from 3.31[Formula: see text]eV to 3.22[Formula: see text]eV with upsurge in the thickness. The film deposited for 30[Formula: see text]min exhibits temperature coefficient resistance of [Formula: see text]1.77%/[Formula: see text]C as measured at 80[Formula: see text]C.

Versal topological stratification and the bifurcation geometry of map-germs of the plane

1990 ◽  
Vol 107 (1) ◽  
pp. 127-147 ◽  
Author(s):  
J. H. Rieger
Keyword(s):  
Differential Geometry ◽  
Classical Result ◽  
Smooth Surface ◽  
Critical Values ◽  
Central Projections ◽  
Apparent Contour ◽  
Smooth Map

The set of critical values of a map of the plane (of corank 1) can be regarded as the apparent contour of a smooth surface. It is a classical result of Whitney[13] that generically the apparent contour is a smooth fold curve with isolated cusps and transverse fold crossings. More recent classifications of smooth map-germs of the plane of low codimension (occurring in generic 2- or 3-parameter families), e.g. in [1, 5, 7], were motivated by a question in differential geometry: given any smooth surface which is generically embedded in ℝ3, produce a list of all possible (orthogonal or central) projections of such a surface.

Sign in / Sign up

Export Citation Format

Share Document