scholarly journals Cytotoxicity of cultured macrophages exposed to antimicrobial zinc oxide (ZnO) coatings on nanoporous aluminum oxide membranes

Biomatter ◽  
2013 ◽  
Vol 3 (3) ◽  
pp. e25528 ◽  
Author(s):  
Peter E. Petrochenko ◽  
Shelby A. Skoog ◽  
Qin Zhang ◽  
David J. Comstock ◽  
Jeffrey W. Elam ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Aluminum Oxide ◽  
Oxide Membranes

Improving the photodetection and stability of a visible-light QDs/ZnO phototransistor via an Al2O3 additional layer

2021 ◽  
Author(s):  
Sungho Park ◽  
Byung Jun Kim ◽  
Tae Yeon Kim ◽  
Eui Young Jung ◽  
Kyu-Myung Lee ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Atomic Layer Deposition ◽  
Quantum Dot ◽  
Aluminum Oxide ◽  
Thin Layer ◽  
Visible Light ◽  
Atomic Layer ◽  
Zno Films ◽  
Additional Layer ◽  
Layer Deposition

We have developed a visible-light phototransistor with excellent photodetection characteristics and stability via atomic layer deposition (ALD) to add a thin layer of aluminum oxide (Al2O3) to quantum dot (QD)/zinc oxide (ZnO) films.

Zwitterionic polymer brush grafting on anodic aluminum oxide membranes by surface-initiated atom transfer radical polymerization

2017 ◽  
Vol 8 (15) ◽  
pp. 2309-2316 ◽  
Author(s):  
Chien-Wei Chu ◽  
Yuji Higaki ◽  
Chao-Hung Cheng ◽  
Ming-Hsiang Cheng ◽  
Chun-Wei Chang ◽  
...  
Keyword(s):  
Aluminum Oxide ◽  
Atom Transfer Radical Polymerization ◽  
Radical Polymerization ◽  
Anodic Aluminum Oxide ◽  
Polymer Brush ◽  
Atom Transfer ◽  
Geometric Effect ◽  
Anodic Aluminum ◽  
Zwitterionic Polymer ◽  
Oxide Membranes

A feasible processing of zwitterionic polymer-grafted anodic aluminum oxide (AAO) membranes by surface-initiated atom transfer radical polymerization (SI-ATRP) and the geometric effect were investigated.

scholarly journals Influence of the anodization conditions and chemical treatment on the formation of alumina membranes with defined pore diameters

2021 ◽  
Author(s):  
Iwona Dobosz
Keyword(s):  
Aluminum Oxide ◽  
Chemical Treatment ◽  
Anodic Aluminum Oxide ◽  
Pore Diameter ◽  
Operating Conditions ◽  
Oxide Growth ◽  
Pore Density ◽  
Anodic Aluminum ◽  
Pore Widening ◽  
Oxide Membranes

AbstractPorous anodic aluminum oxide membranes were fabricated via two-step anodization of aluminum in 0.3 M H2C2O4, 0.3 M H2SO4 and 0.17 M H3PO4 solutions. The parameters of the oxide film such as: pore diameter (Dp), interpore distance (Dc), porosity (P) and pore density (ρ) can be completely controlled by the operating conditions of the anodization. Additionally, the pore diameters and pore density can be controlled via a chemical treatment (pore opening/widening process). The effect of anodizing conditions such as the applied voltage, type of electrolyte and purity of the substrate on the rate of porous oxide growth are discussed. The obtained results were compared with the theoretical predictions and data that has been reported in the literature. The influence of the duration of chemical etching on the structural features of the oxide membranes was studied. On the based on qualitative and quantitative FFT analyzes and circularity maps, it was found that the nanostructures of anodized aluminum have the maximum order under certain specified conditions. The presence of alloying elements affects not only the rate of oxide growth but also the morphology of the anodic aluminum oxide. The rate of oxide growth depends on the electrolyte type and temperature. During chemical treatment of the oxide films pore diameter increases with the pore widening time and the highest pore widening was observed in phosphoric acid solution.

Template Synthesis of Indium Nanowires Using Anodic Aluminum Oxide Membranes

2008 ◽  
Vol 8 (9) ◽  
pp. 4488-4493 ◽  
Author(s):  
Feng Chen ◽  
Adrian H. Kitai
Keyword(s):  
Aluminum Oxide ◽  
Template Synthesis ◽  
Anodic Aluminum Oxide ◽  
Preferred Orientation ◽  
Hydraulic Pressure ◽  
X Ray Diffraction ◽  
Aao Template ◽  
X Ray ◽  
Anodic Aluminum ◽  
Oxide Membranes

Indium nanowires with diameters approximately 300 nm have been synthesized by a hydraulic pressure technique using anodic aluminum oxide (AAO) templates. The indium melt is injected into the AAO template and solidified to form nanostructures. The nanowires are dense, continuous and uniformly run through the entire ∼60 μm thickness of the AAO template. X-ray diffraction (XRD) reveals that the nanowires are polycrystalline with a preferred orientation. SEM is performed to characterize the morphology of the nanowires.

Thermal Evaporation–Oxidation Deposited Aluminum Oxide as an Interfacial Modifier to Improve the Performance and Stability of Zinc Oxide-Based Planar Perovskite Solar Cells

2020 ◽  
Vol 3 (10) ◽  
pp. 9618-9627
Author(s):  
Carlos A. Rodríguez-Castañeda ◽  
Paola M. Moreno-Romero ◽  
Asiel N. Corpus-Mendoza ◽  
Guillermo Suárez-Campos ◽  
Margarita Miranda-Hernández ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Solar Cells ◽  
Aluminum Oxide ◽  
Thermal Evaporation ◽  
Perovskite Solar Cells ◽  
Interfacial Modifier

Highly Ordered and Crystalline Cu Nanowires in Anodic Aluminum Oxide Membranes for Biomedical Applications

2020 ◽  
Vol 217 (13) ◽  
pp. 1900842 ◽  
Author(s):  
Monika Nehra ◽  
Ananya N. Dilbaghi ◽  
Vishal Singh ◽  
Nitin Kumar Singhal ◽  
Sandeep Kumar
Keyword(s):  
Aluminum Oxide ◽  
Biomedical Applications ◽  
Anodic Aluminum Oxide ◽  
Cu Nanowires ◽  
Anodic Aluminum ◽  
Oxide Membranes
Sign in / Sign up

Export Citation Format

Share Document