Effect of light on birnessite catalysis of the Maillard reaction and its implication in humification

2001 ◽  
Vol 81 (3) ◽  
pp. 277-283 ◽  
Author(s):  
A. Jokic ◽  
A I Frenkel ◽  
P M Huang
Keyword(s):  
Humic Substances ◽  
Maillard Reaction ◽  
Solid Phase ◽  
Natural Environments ◽  
Promoting Effect ◽  
Nitrogenous Compounds ◽  
Heterogeneous Catalytic ◽  
Catalytic Role ◽  
Effect Of Light

The Maillard reaction between carbohydrates and nitrogenous compounds originally investigated in 1912 has subsequently been proposed as a possible pathway for the formation of humic substances in natural environments. However, the role of mineral catalysis of the Maillard reaction is little understood and the promoting effect of light on such catalysis is not known. Birnessite (δ-MnO2), which is commonly present in soil environments, was investigated for its activity in promoting the Maillard reaction between glucose and glycine at a light intensity of 168 µE s–1 m–2 or in the dark. The presence of substantial quantities of Mn(II) was detected in both the supernatant and solid phase of the glucose-glycine-birnessite systems. The spectroscopic evidence indicates that birnessite, in the presence of light, is a very effective catalyst in abiotic browning of solutions of glucose and glycine. Furthermore, birnessite significantly promoted the reaction even in the absence of light. Therefore, the abiotic heterogeneous catalytic role of soil minerals such as birnessite in polycondensation of simple sugars and amino acids merits close attention in the formation of humic substances in natural environments. Key words: Maillard reaction, heterogeneous catalysis, light, birnessite, humic substance formation, XANES

Direct Evidence of Catalytic Role of Boron in Graphite‐to‐Diamond Solid‐Phase Conversion under High Pressure

2020 ◽  
Vol 14 (8) ◽  
pp. 2000247 ◽  
Author(s):  
Rustem Bagramov ◽  
Vladimir Filonenko ◽  
Igor Zibrov ◽  
Sergey Lyapin ◽  
Igor Vlasov
Keyword(s):  
High Pressure ◽  
Direct Evidence ◽  
Solid Phase ◽  
Phase Conversion ◽  
Catalytic Role

Introduction to geomicrobiology

2018 ◽  
Author(s):  
David L. Kirchman
Keyword(s):  
Fossil Fuels ◽  
Solid Phase ◽  
Direct Reduction ◽  
Iron Oxidation ◽  
Mineral Dissolution ◽  
Precipitation Process ◽  
Soluble Ions ◽  
Chemolithoautotrophic Bacteria ◽  
The Impact

Geomicrobiology, the marriage of geology and microbiology, is about the impact of microbes on Earth materials in terrestrial systems and sediments. Many geomicrobiological processes occur over long timescales. Even the slow growth and low activity of microbes, however, have big effects when added up over millennia. After reviewing the basics of bacteria–surface interactions, the chapter moves on to discussing biomineralization, which is the microbially mediated formation of solid minerals from soluble ions. The role of microbes can vary from merely providing passive surfaces for mineral formation, to active control of the entire precipitation process. The formation of carbonate-containing minerals by coccolithophorids and other marine organisms is especially important because of the role of these minerals in the carbon cycle. Iron minerals can be formed by chemolithoautotrophic bacteria, which gain a small amount of energy from iron oxidation. Similarly, manganese-rich minerals are formed during manganese oxidation, although how this reaction benefits microbes is unclear. These minerals and others give geologists and geomicrobiologists clues about early life on Earth. In addition to forming minerals, microbes help to dissolve them, a process called weathering. Microbes contribute to weathering and mineral dissolution through several mechanisms: production of protons (acidity) or hydroxides that dissolve minerals; production of ligands that chelate metals in minerals thereby breaking up the solid phase; and direct reduction of mineral-bound metals to more soluble forms. The chapter ends with some comments about the role of microbes in degrading oil and other fossil fuels.

scholarly journals The Role of Electric Pressure/Stress Suppressing Pinhole Defect on Coalescence Dynamics of Electrified Droplet

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 503
Author(s):  
Jaehyun Lee ◽  
Ehsan Esmaili ◽  
Giho Kang ◽  
Baekhoon Seong ◽  
Hosung Kang ◽  
...  
Keyword(s):  
Solid Phase ◽  
Critical Factor ◽  
Air Pressure ◽  
Conical Shape ◽  
Electric Stress ◽  
Bottom Interface ◽  
Electric Pressure ◽  
Pressure Stress ◽  
Air Film

The dimple occurs by sudden pressure inversion at the droplet’s bottom interface when a droplet collides with the same liquid-phase or different solid-phase. The air film entrapped inside the dimple is a critical factor affecting the sequential dynamics after coalescence and causing defects like the pinhole. Meanwhile, in the coalescence dynamics of an electrified droplet, the droplet’s bottom interfaces change to a conical shape, and droplet contact the substrate directly without dimple formation. In this work, the mechanism for the dimple’s suppression (interfacial change to conical shape) was studied investigating the effect of electric pressure. The electric stress acting on a droplet interface shows the nonlinear electric pressure adding to the uniform droplet pressure. This electric stress locally deforms the droplet’s bottom interface to a conical shape and consequentially enables it to overcome the air pressure beneath the droplet. The electric pressure, calculated from numerical tracking for interface and electrostatic simulation, was at least 108 times bigger than the air pressure at the center of the coalescence. This work helps toward understanding the effect of electric stress on droplet coalescence and in the optimization of conditions in solution-based techniques like printing and coating.

scholarly journals Flammable gases produced by TiO2 nanoparticles under magnetic stirring in water

Friction ◽  
2021 ◽  
Author(s):  
Pengcheng Li ◽  
Chongyang Tang ◽  
Xiangheng Xiao ◽  
Yanmin Jia ◽  
Wanping Chen
Keyword(s):  
Tio2 Nanoparticles ◽  
Quartz Glass ◽  
Dye Degradation ◽  
Mechanical Energy ◽  
Chemical Energy ◽  
Magnetic Stirring ◽  
Catalytic Role ◽  
Nanostructured Semiconductors

AbstractThe friction between nanomaterials and Teflon magnetic stirring rods has recently drawn much attention for its role in dye degradation by magnetic stirring in dark. Presently the friction between TiO2 nanoparticles and magnetic stirring rods in water has been deliberately enhanced and explored. As much as 1.00 g TiO2 nanoparticles were dispersed in 50 mL water in 100 mL quartz glass reactor, which got gas-closed with about 50 mL air and a Teflon magnetic stirring rod in it. The suspension in the reactor was magnetically stirred in dark. Flammable gases of 22.00 ppm CO, 2.45 ppm CH4, and 0.75 ppm H2 were surprisingly observed after 50 h of magnetic stirring. For reference, only 1.78 ppm CO, 2.17 ppm CH4, and 0.33 ppm H2 were obtained after the same time of magnetic stirring without TiO2 nanoparticles. Four magnetic stirring rods were simultaneously employed to further enhance the stirring, and as much as 30.04 ppm CO, 2.61 ppm CH4, and 8.98 ppm H2 were produced after 50 h of magnetic stirring. A mechanism for the catalytic role of TiO2 nanoparticles in producing the flammable gases is established, in which mechanical energy is absorbed through friction by TiO2 nanoparticles and converted into chemical energy for the reduction of CO2 and H2O. This finding clearly demonstrates a great potential for nanostructured semiconductors to utilize mechanical energy through friction for the production of flammable gases.

scholarly journals Catalytic role of histidine 147 in Escherichia coli thymidylate synthase

1989 ◽  
Vol 264 (32) ◽  
pp. 19132-19137
Author(s):  
I K Dev ◽  
B B Yates ◽  
J Atashi ◽  
W S Dallas
Keyword(s):  
Escherichia Coli ◽  
Thymidylate Synthase ◽  
Catalytic Role
Sign in / Sign up

Export Citation Format

Share Document