Impact of cultivars and herbicides on weed management in alfalfa

2006 ◽  
Vol 86 (3) ◽  
pp. 875-885 ◽  
Author(s):  
J. R. Moyer ◽  
S. N. Acharya
Keyword(s):  
British Columbia ◽  
Weed Control ◽  
Weed Management ◽  
Forage Quality ◽  
Western Canada ◽  
Downy Brome ◽  
Weed Species ◽  
Standard Type ◽  
Southern Alberta ◽  
Medicago Sativa L

Weeds, especially dandelion (Taraxacum officinale Weber in F.H. Wigg.), tend to infest a forage alfalfa (Medicago sativa L.) stand 2 to 4 yr after establishment. To develop better weed management systems, experiments were conducted at Lethbridge, Alberta, from 1995 to 2002 and Creston, British Columbia, from 1998 to 2001, which included the alfalfa cultivars Beaver (standard type) and AC Blue J (Flemish type) and annual applications of metribuzin and hexazinone. These herbicides are registered for weed control in irrigated alfalfa in Alberta and alfalfa grown for seed. In addition, two sulfonylurea herbicides, metsulfuron and sulfosulfuron, and glyphosate were included. All of the herbicides except glyphosate controlled or suppressed dandelion and mustard family weeds. Metsulfuron at 5 g a.i. ha-1 almost completely controlled dandelion at both locations. However, after metsulfuron application at Lethbridge, dandelion was replaced with an infestation of downy brome, which is unpalatable for cattle. None of the herbicides increased total forage (alfalfa + weed) yield, and in some instances herbicides reduced forage quality by causing a shift from a palatable to an unpalatable weed species. However, it was observed that AC Blue J consistently yielded more than Beaver, and weed biomass was consistently less in the higher-yielding cultivar. AC Blue J was developed primarily for the irrigated area in southern Alberta and for southern British Columbia. Therefore, additional experiments should be conducted to determine which alfalfa cultivars have the greatest ability to compete with weeds in other regions of western Canada. Key words: Alfalfa yield, dandelion, forage quality, weed control

Bio-efficacy of post emergence herbicides in boro rice nursery as well as main field and their residual effects on non-target microorganisms

2020 ◽  
Vol 57 (3) ◽  
pp. 199-210
Author(s):  
Rajib Kundu ◽  
Mousumi Mondal ◽  
Sourav Garai ◽  
Ramyajit Mondal ◽  
Ratneswar Poddar
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Field Experiments ◽  
Block Design ◽  
Resistance Index ◽  
Residual Effects ◽  
Cost Ratio ◽  
Main Field ◽  
Weed Species ◽  
Similar Treatment

Field experiments were conducted at research farm of Bidhan Chandra Krishi Viswavidyalaya, Kalyani, West Bengal, India (22°97' N latitude and 88°44' E longitude, 9.75 m above mean sea level) under natural weed infestations in boro season rice (nursery bed as well as main field) during 2017-18 and 2018-19 to evaluate the herbicidal effects on weed floras, yield, non-target soil organisms to optimize the herbicide use for sustainable rice-production. Seven weed control treatments including three doses of bispyribac-sodium 10% SC (150,200, and 250 ml ha-1), two doses of fenoxaprop-p-ethyl 9.3% EC (500 and 625 ml ha-1), one weed free and weedy check were laid out in a randomized complete block design, replicated thrice. Among the tested herbicides, bispyribac-sodium with its highest dose (250 ml ha-1) resulted in maximum weed control efficiency, treatment efficiency index and crop resistance index irrespective of weed species and dates of observation in both nursery as well as main field. Similar treatment also revealed maximum grain yield (5.20 t ha-1), which was 38.38% higher than control, closely followed by Fenoxaprop-p-ethyl (625 ml ha-1) had high efficacy against grasses, sedge and broadleaf weed flora. Maximum net return (Rs. 48765 ha-1) and benefit cost ratio (1.72) were obtained from the treatment which received bispyribac-sodium @ 250 ml ha-1. Based on overall performance, the bispyribac-sodium (250 ml ha-1) may be considered as the best herbicide treatment for weed management in transplanted rice as well as nursery bed.

Weed Management with Glyphosate- and Glufosinate-Based Systems in PHY 485 WRF Cotton

2011 ◽  
Vol 25 (2) ◽  
pp. 183-191 ◽  
Author(s):  
Jared R. Whitaker ◽  
Alan C. York ◽  
David L. Jordan ◽  
A. Stanley Culpepper
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Fiber Quality ◽  
Palmer Amaranth ◽  
Weed Species ◽  
Crop Tolerance ◽  
The North ◽  
Annual Grasses ◽  
Resistance Trait ◽  
Cotton Belt

Glyphosate-resistant (GR) Palmer amaranth has become a serious pest in parts of the Cotton Belt. Some GR cotton cultivars also contain the WideStrike™ insect resistance trait, which confers tolerance to glufosinate. Use of glufosinate-based management systems in such cultivars could be an option for managing GR Palmer amaranth. The objective of this study was to evaluate crop tolerance and weed control with glyphosate-based and glufosinate-based systems in PHY 485 WRF cotton. The North Carolina field experiment compared glyphosate and glufosinate alone and in mixtures applied twice before four- to six-leaf cotton. Additional treatments included glyphosate and glufosinate mixed withS-metolachlor or pyrithiobac applied to one- to two-leaf cotton followed by glyphosate or glufosinate alone on four- to six-leaf cotton. All treatments received a residual lay-by application. Excellent weed control was observed from all treatments on most weed species. Glyphosate was more effective than glufosinate on glyphosate-susceptible (GS) Palmer amaranth and annual grasses, while glufosinate was more effective on GR Palmer amaranth. Annual grass and GS Palmer amaranth control by glyphosate plus glufosinate was often less than control by glyphosate alone but similar to or greater than control by glufosinate alone, while mixtures were more effective than either herbicide alone on GR Palmer amaranth. Glufosinate caused minor and transient injury to the crop, but no differences in cotton yield or fiber quality were noted. This research demonstrates glufosinate can be applied early in the season to PHY 485 WRF cotton without concern for significant adverse effects on the crop. Although glufosinate is often less effective than glyphosate on GS Palmer amaranth, GR Palmer amaranth can be controlled with well-timed applications of glufosinate. Use of glufosinate in cultivars with the WideStrike trait could fill a significant void in current weed management programs for GR Palmer amaranth in cotton.

Alternatives to Atrazine for Weed Management in Processing Sweet Corn

Weed Science ◽  
2016 ◽  
Vol 64 (3) ◽  
pp. 531-539 ◽  
Author(s):  
Zubeyde Filiz Arslan ◽  
Martin M. Williams ◽  
Roger Becker ◽  
Vincent A. Fritz ◽  
R. Ed Peachey ◽  
...  
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Sweet Corn ◽  
Crop Yields ◽  
Production Systems ◽  
Field Trials ◽  
Management Systems ◽  
Weed Species ◽  
Application Timing ◽  
Production Areas

Atrazine has been the most widely used herbicide in North American processing sweet corn for decades; however, increased restrictions in recent years have reduced or eliminated atrazine use in certain production areas. The objective of this study was to identify the best stakeholder-derived weed management alternatives to atrazine in processing sweet corn. In field trials throughout the major production areas of processing sweet corn, including three states over 4 yr, 12 atrazine-free weed management treatments were compared to three standard atrazine-containing treatments and a weed-free check. Treatments varied with respect to herbicide mode of action, herbicide application timing, and interrow cultivation. All treatments included a PRE application of dimethenamid. No single weed species occurred across all sites; however, weeds observed in two or more sites included common lambsquarters, giant ragweed, morningglory species, velvetleaf, and wild-proso millet. Standard treatments containing both atrazine and mesotrione POST provided the most efficacious weed control among treatments and resulted in crop yields comparable to the weed-free check, thus demonstrating the value of atrazine in sweet corn production systems. Timely interrow cultivation in atrazine-free treatments did not consistently improve weed control. Only two atrazine-free treatments consistently resulted in weed control and crop yield comparable to standard treatments with atrazine POST: treatments with tembotrione POST either with or without interrow cultivation. Additional atrazine-free treatments with topramezone applied POST worked well in Oregon where small-seeded weed species were prevalent. This work demonstrates that certain atrazine-free weed management systems, based on input from the sweet corn growers and processors who would adopt this technology, are comparable in performance to standard atrazine-containing weed management systems.

Decision Rules for Postemergence Control of Pigweed (Amaranthusspp.) in Soybean (Glycine max)

Weed Science ◽  
1996 ◽  
Vol 44 (1) ◽  
pp. 126-132 ◽  
Author(s):  
Anita Dieleman ◽  
Allan S. Hamill ◽  
Glenn C. Fox ◽  
Clarence J. Swanton
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Economic Model ◽  
Yield Loss ◽  
Control Function ◽  
Decision Rules ◽  
Optimal Dose ◽  
Weed Species ◽  
Weed Density ◽  
Control Decision

Weed control decision rules were derived for the application of postemergence herbicides to control pigweed species in soybean. Field experiments were conducted at two locations in 1992 and 1993 to evaluate soybean-pigweed interference. A damage function was determined that related yield loss to time of pigweed emergence, density, and soybean weed-free yield. A control function described pigweed species response to variable doses of imazethapyr and thifensulfuron. The integration of these two functions formed the basis of an economic model used to derive two weed control decision rules, the biologist's “threshold weed density” and the economist's “optimal dose.” Time of weed emergence had a more significant role than weed density in the economic model. Later-emerging pigweed caused less yield loss and therefore, decision rules lead to overuse of herbicides if emergence time is not considered. The selected herbicide dose influenced the outcome of the control function. Depending on the desired level of weed control, a herbicide could be chosen to either eradicate the escaped weed species (label or biologically-effective doses) or reduce the growth of the weed species and thereby offset interference (optimal dose). The development of a biologically-effective dose by weed species matrix was recommended. Decision rules should not be utilized as an exclusive weed management strategy but rather as a component of an integrated weed management program.

Weed Control Efficacy and Pinto Bean (Phaseolus vulgaris) Tolerance to Early Season Mechanical Weeding

1995 ◽  
Vol 9 (3) ◽  
pp. 531-534 ◽  
Author(s):  
Mark J. Vangessel ◽  
Lori J. Wiles ◽  
Edward E. Schweizer ◽  
Phil Westra
Keyword(s):  
Phaseolus Vulgaris ◽  
Weed Control ◽  
Weed Management ◽  
Seed Weight ◽  
Growth Stage ◽  
Integrated Approach ◽  
Growth Stages ◽  
Weed Species ◽  
Control Efficacy ◽  
Pinto Bean

An integrated approach to weed management in pinto bean is needed since available herbicides seldom adequately control all weed species present in a field. A two-year study was conducted to assess weed control efficacy and pinto bean tolerance to mechanical weeding from a rotary hoe or flex-tine harrow at crook, unifoliolate, and trifoliolate stages of bean development. Weed control was similar for both implements and all timings in 1993. In 1994, mechanical weeding at trifoliolate and both crook and trifoliolate stages controlled more weeds than at other growth stages, regardless of type of implement. Using the flex-tine harrow reduced pinto bean stand, but results based on growth stage were not consistent each year. Damage to pinto bean hypocotyls and stems was observed with the flex-tine harrow used at both crook and trifoliolate stages in 1994. Rotary hoeing did not reduce pinto bean stand or cause injury. Yield and seed weight did not differ among treatments in either year.

scholarly journals Bio-Herbicidal Effects of Oregano and Rosemary Essential Oils on Chamomile (Matricaria chamomilla L.) Crop in Organic Farming System

Agronomy ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 475 ◽  
Author(s):  
Frabboni ◽  
Tarantino ◽  
Petruzzi ◽  
Disciglio
Keyword(s):  
Essential Oils ◽  
Weed Control ◽  
Weed Management ◽  
Farming System ◽  
Point Of View ◽  
Matricaria Chamomilla ◽  
Weed Species ◽  
Organic System ◽  
Economic Point ◽  
Natural Herbicides

Chamomile (Matricaria chamomilla L.) is a well-known medicinal plant species in which the products requested from the market are those that are derived from the organic system. The study was conducted to assess the allelopathic effects, as natural herbicides, of two essential oils extracted from oregano (Origanum vulgare L.) and rosemary (Rosmarimum officinalis L.), with the objective of exploring the possibility of their utilization for future weed management. A field experiment was conducted over two seasons, when the infestation of 15 different weed species was detected. Each essential oil was applied at two different concentrations (50% diluted and undiluted), three times during the chamomile crop under an organic farm system. The results demonstrated that the germination of different weed species was affected differently by the type of essential oils and especially by their concentrations. The undiluted oils inhibited most of the germination of several weed species, highlighting a significantly higher percentage of Weed Control Efficiency (WCE) and suggesting the potential to be used as bio-herbicides. Bioherbicidal weed control methods could offer an advantage with respect to hand weeding, particularly from an economic point of view.

Group characteristics of tea growers relative to weed management: a case study in southwestern China

2019 ◽  
Vol 33 (6) ◽  
pp. 847-854
Author(s):  
Guoqi Chen ◽  
Bin Zhang ◽  
Qiong Wu ◽  
Linhong Jin ◽  
Zhuo Chen ◽  
...  
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Management Practices ◽  
Guizhou Province ◽  
Cooperative Groups ◽  
Weed Species ◽  
Training Experience ◽  
Farmer Training ◽  
Group Characteristics

AbstractFarmer training is important to improve weed management practices in tea cultivation. To explore the group characteristics of tea growers, we interviewed 354 growers in Guizhou Province, China. Sixty-one percent of the respondents planted tea for companies or cooperative groups, and 56% managed tea gardens larger than 10 ha. Self-employed tea growers tended to be older and smallholders, and to apply herbicides and conduct weed control less frequently (P < 0.05). Approximately 87% of the respondents conducted weed control two to four times yr−1, 83% spent between $200 and $2,000 ha−1 yr−1 for weed control, and 42% thought weed control costs would decrease by 5 years from this study. Twenty-eight species were mentioned by the respondents as being the most serious. According to canonical correspondence analysis, latitude, altitude, being self-employed or a member of a cooperative, having training experience in tea-garden weed management, and frequency and cost of weed control in tea gardens had significant (P < 0.05) influence on the composition of most troublesome weed species listed by respondents. Among the respondents, 60% had had farmer’s training on weed management in tea gardens. Of these, a significant number (P < 0.05) tended to think weed control costs would decrease, and a nonsignificant number (P > 0.05) tended to conduct weed control more frequently and have lower weed management costs in their tea gardens.

Weed management with CGA-362622 in transgenic and nontransgenic cotton

Weed Science ◽  
2003 ◽  
Vol 51 (6) ◽  
pp. 1002-1009 ◽  
Author(s):  
Dunk Porterfield ◽  
John W. Wilcut ◽  
Jerry W. Wells ◽  
Scott B. Clewis
Keyword(s):  
North Carolina ◽  
Weed Control ◽  
Weed Management ◽  
Field Studies ◽  
Palmer Amaranth ◽  
Management Systems ◽  
Weed Species ◽  
Crop Tolerance ◽  
Prickly Sida ◽  
Smooth Pigweed

Field studies conducted at three locations in North Carolina in 1998 and 1999 evaluated crop tolerance, weed control, and yield with CGA-362622 alone and in combination with various weed management systems in transgenic and nontransgenic cotton systems. The herbicide systems used bromoxynil, CGA-362622, glyphosate, and pyrithiobac applied alone early postemergence (EPOST) or mixtures of CGA-362622 plus bromoxynil, glyphosate, or pyrithiobac applied EPOST. Trifluralin preplant incorporated followed by (fb) fluometuron preemergence (PRE) alone or fb a late POST–directed (LAYBY) treatment of prometryn plus MSMA controlled all the weed species present less than 90%. Herbicide systems that included soil-applied and LAYBY herbicides plus glyphosate EPOST or mixtures of CGA-362622 EPOST plus bromoxynil, glyphosate, or pyrithiobac controlled broadleaf signalgrass, entireleaf morningglory, large crabgrass, Palmer amaranth, prickly sida, sicklepod, and smooth pigweed at least 90%. Only cotton treated with these herbicide systems yielded equivalent to the weed-free check for each cultivar. Bromoxynil systems did not control Palmer amaranth and sicklepod, pyrithiobac systems did not control sicklepod, and CGA-362622 systems did not control prickly sida.

The effects of weed density and different weed control applications on yield and yield components of chickpea cultivars

2019 ◽  
Author(s):  
Melih Yilar Omer Sozen ◽  
Ufuk Karadavut
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Yield Components ◽  
Control Method ◽  
Herbicide Application ◽  
Weed Species ◽  
Control Applications ◽  
Weed Density ◽  
Yield And Yield Components ◽  
Plot Design

This study was conducted to determine the effects of weed density and different weed control treatments on chickpea yield and yield components. The experiment was carried out in split plot design with 3 replications in experimental fields of Kirsehir Ahi Evran University during 2016 and 2017 crop seasons. Total nine treatments (no weed control, permanent weed control, one-time hoeing, two-time hoeing, three-time hoeing, herbicide application after emergence, one-time hoeing with herbicide application, two-time hoeing with herbicide application and three-time hoeing with herbicide application) were compared to know the most effective weed control method. Vaccaria pyramidata Medik., Sinapis arvensis L., Acroptilon repens L. weed species were found to be the most intense in the experimental area. All weed control applications had significant effect on chickpea yield and yield components compared to weedy plots. Three-time hoeing with herbicide application increased the yield by 361.55-478.50% compared to weedy plots. Likewise, three-time hoeing application even increased the yield by 348.50-357.09% compared to weedy plots. The results revealed that three-time hoeing with herbicide and three-time hoeing applications stood out in weed management to obtain a good yield in chickpea cultivation at Kirsehir province.

Weed control in soybean using pyroxasulfone and sulfentrazone

2015 ◽  
Vol 95 (6) ◽  
pp. 1199-1204 ◽  
Author(s):  
Kimberly D. Belfry ◽  
Kristen E. McNaughton ◽  
Peter H. Sikkema
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Chenopodium Album ◽  
Ambrosia Artemisiifolia ◽  
Weed Species ◽  
Common Lambsquarters ◽  
Industry Standard ◽  
Control Option ◽  
Green Foxtail ◽  
Glycine Max L

Belfry, K. D., McNaughton, K. E. and Sikkema, P. H. 2015. Weed control in soybean using pyroxasulfone and sulfentrazone. Can. J. Plant Sci. 95: 1199–1204. Pyroxasulfone and sulfentrazone are new herbicides currently being evaluated for weed control in soybean [Glycine max (L.) Merr.] in Ontario, Canada. Seven experiments were conducted over a 3-yr period (2011 to 2013) at Ridgetown and Exeter, Ontario, to evaluate weed management using pyroxasulfone, sulfentrazone and their tank-mixes relative to the industry standard, imazethapyr plus metribuzin. Tank-mixing pyroxasulfone and sulfentrazone provided up to 97, 46, 60, 100 and 71% control of common lambsquarters (Chenopodium album L.), common ragweed (Ambrosia artemisiifolia L.), green foxtail [Setaria viridis (L.) Beauv.], Powell amaranth [Amaranthus powellii (S.) Wats.] and velvetleaf (Abutilon theophrasti Medic.), respectively, at 2 wk after treatment. Control with pyroxasulfone and sulfentrazone was improved when tank-mixed, relative to application of each herbicide separately. Although control was variable across weed species, no difference in control was identified between pyroxasulfone plus sulfentrazone and imazethapyr plus metribuzin. Soybean yield was up to 2.7, 2.4 and 2.9 t ha−1 for pyroxasulfone, sulfentrazone and pyroxasulfone plus sulfentrazone application, yet imazethapyr plus metribuzin provided the highest yield (3.3 t ha−1). This research demonstrates that pyroxasulfone plus sulfentrazone may be used as a valuable weed control option in soybean; however, weed community composition may limit herbicidal utility.

Sign in / Sign up

Export Citation Format

Share Document