Yield and quality of canola seed as affected by stage of maturity at swathing

2007 ◽  
Vol 87 (1) ◽  
pp. 13-26 ◽  
Author(s):  
C. L. Vera ◽  
R. K. Downey ◽  
S. M. Woods ◽  
J. P. Raney ◽  
D. I. McGregor ◽  
...  
Keyword(s):  
Fatty Acids ◽  
Brassica Napus ◽  
Seed Development ◽  
Seed Yield ◽  
Oil Content ◽  
Seed Quality ◽  
Combined Treatment ◽  
Oil Composition ◽  
Yield And Quality

Swathing is an important canola (Brassica napus L.) harvest operation in western Canada. The determination of the optimum timing for this operation is worth considering, as premature swathing may lead to reduced seed yield and quality. Seed yield and quality of three canola cultivars (44A89, AC Excel and Ebony), as affected by two seeding dates and several harvest times (six or eight swathing times and one direct combined treatment) was investigated on a Black Chernozem silty loam soil at Melfort, Saskatchewan, Canada, during 1998, 2000 and 2001. Seed yield, weight, protein content (oil-free meal basis) and oil content generally increased with seed development and swathing time. Early seeding was more conducive to achieving higher seed yield, especially in good growing conditions, and resulted in heavier mature seeds with higher oil content. Seed oil composition also changed during seed development. The proportion of oleic (C18:1) and linolenic (C18:3) acids increased, while that of myristic (C14:0), palmitic (C16:0), palmitoleic (C16:1), stearic (C18:0), linoleic (C18:2) and ara chidic (C20:0) acids decreased. The levels of the long chain fatty acids eicosenoic (C20:1) and erucic (C22:1) acids were unaffected. However, the overall amount of fatty acids synthesized (mg 100 seeds-1) increased as seeds matured. Swathing was advantageous over direct combining in preventing weather-induced shattering. Key words: Brassica napus, canola, fatty acid, oil, protein, seed development, seed quality, shattering, direct combining, swathing

scholarly journals Plant spacing and pollen quantity on yield and quality of squash seeds

2003 ◽  
Vol 21 (3) ◽  
pp. 443-447 ◽  
Author(s):  
Márcio S. de Lima ◽  
Antonio I. I. Cardoso ◽  
Marcelo F. Verdial
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Block Design ◽  
Fruit Production ◽  
Plant Spacing ◽  
Plant Seed ◽  
Yield And Quality ◽  
Randomized Complete Block Design ◽  
Pollen Quantity

Squash seeds yield and quality can be improved by proper population plant spacing and the pollen quantity, which influences the pollination quality and fertilization. Nine experiments were conducted as a factorial combination of three spacing between plants (0.8 x 0.3, 0.8 x 0.6 and 0.8 x 0.9 m), two quantities of pollen (50% of an anther and another entire one) and natural insect pollination. Seed and fruit production parameters, and seed quality were evaluated. A randomized complete block design, five replications, with ten plants per plot was adopted. Larger plant spacing increased the average number of mature fruits and seed yield per plant. Seed yield was directly proportional to the amount of pollen used during pollination. Higher amounts of pollen resulted in higher seed yield per area, but the plant spacing did not affect this characteristic. Manual pollination, using a whole anther, did not differ from natural pollination in relation to seed yield and quality.

scholarly journals Effect of nitrogen and potassium fertilization on the production and quality of oil in Jatropha curcas L. under the dry and warm climate conditions of Colombia

2014 ◽  
Vol 32 (2) ◽  
pp. 255-265 ◽  
Author(s):  
Omar Montenegro R. ◽  
Stanislav Magnitskiy ◽  
Martha C. Henao T.
Keyword(s):  
Fatty Acids ◽  
Oleic Acid ◽  
Jatropha Curcas ◽  
Oil Content ◽  
Unsaturated Fatty Acids ◽  
Saturated Fatty Acids ◽  
Fruit Production ◽  
Biodiesel Production ◽  
Oil Composition

This study was conducted to assess fruit and seed yield, oil content and oil composition of Jatropha curcas fertilized with different doses of nitrogen and potassium in Espinal (Tolima, Colombia). The yields ranged from 4,570 to 8,800 kg ha-1 of fruits and from 2,430 to 4,746 kg ha-1 of seeds. These yields showed that the fertilizer dose of 150 kg ha-1 N + 120 kg ha-1K increased fruit production by 92% and seed production by 95%, which represents an increase of about 100% in oil production, which increased from 947 to 1,900 kg ha-1. The total oil content in the seeds ranged from 38.7 to 40.1% (w/w) with a high content of the unsaturated fatty acids oleic (> 47%) and linoleic acid (> 29%). The highest content of oleic acid in the seed oil was from the unfertilized control plants and plants with an application of 100 kg ha-1 of N and 60 kg ha-1 of K, with an average of 48%. The lowest content of oleic acid was registered when a low dose of nitrogen and a high level of potassium were applied at a ratio of 1:2.4 and doses of 50 kg ha-1 N + 120 kg ha-1 K, respectively. Low contents of the saturated fatty acids palmitic (13.4%) and stearic (7.26%) were obtained, making this oil suitable for biodiesel production. The nitrogen was a more important nutrient for the production and quality of oil in J. curcas than potassium under the studied conditions of soil and climate.

Effect of preharvest applications of glyphosate on the drying, yield and quality of canola

2000 ◽  
Vol 80 (2) ◽  
pp. 433-439 ◽  
Author(s):  
A. L. Darwent ◽  
K. J. Kirkland ◽  
L. Townley-Smith ◽  
K. N. Harker ◽  
A. J. Cessna
Keyword(s):  
Brassica Rapa ◽  
Seed Yield ◽  
Seed Quality ◽  
Canola Seed ◽  
Moisture Contents ◽  
Yield And Quality ◽  
Seed Moisture ◽  
Seed Content ◽  
Seed Yields

Potential use of preharvest applications of glyphosate in canola (Brassica rapa L.) in western Canada both as a harvest aid and to control weeds prompted this study. Experiments were conducted from 1988 to 1990 at four locations in the region to document the effectiveness of preharvest applications of glyphosate to enhance canola seed and foliage drydown and to measure the effect of such applications on seed yield and quality. Glyphosate was applied in early August to early September at rates of 0.45, 0.90 and 1.70 kg acid equivalent ha−1 to canola with seed moisture contents ranging from 79 to 12%. Seed and foliage moisture drydown were not enhanced by glyphosate treatment. Glyphosate treatments generally had little or no effect on canola seed yields, seed weight, seed germination, green seed content or oil content except when applied when the pods were green and when seed moisture contents were high. Seed/pod moisture was not a reliable indicator of stage of canola development and thus, should not be used alone as an indicator of when preharvest applications of glyphosate can be applied to canola without decreasing seed yield and quality. Key words: Glyphosate, canola, Brassica rapa L., preharvest application, desiccation, seed quality

EFFECTS OF CHEMICAL DESICCATION VERSUS SWATHING ON SEED YIELD AND QUALITY OF FABABEANS (VICIA FABA)

1980 ◽  
Vol 60 (4) ◽  
pp. 1115-1121 ◽  
Author(s):  
M. F. BETTS ◽  
I. N. MORRISON
Keyword(s):  
Vicia Faba ◽  
Seed Yield ◽  
Seed Quality ◽  
Yield And Quality ◽  
Seed Yields

Fababean plants were swathed or desiccated with diquat [6,7-dihydrodipyrido (1,2-A:2′, 1′-C) pyrazinediium salt] at four stages of maturity corresponding to the time when 0, 10, 25 and 50% of the pods had turned from green to black. Over the 3 yr of the study no significant differences were observed between seed yields from swathed or desiccated plants. Regardless of whether the plants were swathed or desiccated, yields and seed quality tended to be higher from plants which had 25% or more black pods at the time of treatment. Desiccating before 25% of the pods have turned black may have a more serious effect on reducing seed quality than swathing before the recommended time. By desiccating prematurely, there is a risk of reducing seed quality by significantly increasing the number of discolored or shrivelled seeds.

A review of copper fertilizer management for optimum yield and quality of crops in the Canadian Prairie provinces

2006 ◽  
Vol 86 (3) ◽  
pp. 605-619 ◽  
Author(s):  
S. S. Malhi ◽  
R. E. Karamanos
Keyword(s):  
Seed Yield ◽  
Growth Stage ◽  
Field Experiments ◽  
Seed Quality ◽  
Soil Analysis ◽  
Growth Stages ◽  
Canadian Prairie ◽  
Cu Deficiency ◽  
Yield And Quality

Deficiency of copper (Cu) in Canadian prairie soils is not widespread, but whenever it occurs it can cause a drastic reduction in seed yield and quality of most cereals, especially wheat. Field experiments conducted in western Canada indicated that broadcast-incorporation of granular Cu fertilizers prior to seeding at 3-5.6 kg Cu ha-1 was usually sufficient to prevent Cu deficiency in wheat, and improve seed yield and quality. At lower rates (< 2.0 kg Cu ha-1), broadcast-incorporation of granular Cu fertilizers was not effective, while surface spray-broadcast followed by incorporation of liquid Cu fertilizers was much more effective in increasing seed yield of wheat in the first year of application. Surface broadcast without incorporation and seedrow-placed granular Cu fertilizers were much less effective in improving seed yield of wheat than their foliar or soil-incorporated applications. In the growing season, foliar applications of Cu at 0.20 to 0.28 kg Cu ha-1 to wheat at the Feekes 6 (first node of stem visible at base of shoot or stem elongation), Feekes 10 (sheath of last leaf completely grown or flag-leaf) and early boot growth stages were very effective in restoring seed yield, while Cu applications at the Feekes 2 (four-leaf) or Feekes 10.5 (complete heading) growth stage did not have a consistent effect to correct damage caused by Cu deficiency. Some Cu fertilizers (e.g., Cu oxide) were less effective than others in preventing/correcting Cu deficiency. Soil application at relatively high rates produced residual benefits in increasing seed yield for a number of years. The sensitivity of crops to Cu deficiency is usually in the order (wheat, flax, canary seed) > (barley, alfalfa) > (timothy seed, oats, corn) > (peas, clovers) > (canola, rye, forage grasses). Stem melanosis in wheat was associated with deficiency of Cu in soil, and the disease was reduced substantially with Cu application. A high level of available P in soil was observed to induce/increase severity of Cu deficiency in wheat. Soil analysis for diethylene triamine pentacetic acid- (DTPA) extractable Cu in soil can be used as a good diagnostic tool to predict Cu deficiency, but there was a poor relationship between total Cu concentration in shoots and the degree of Cu deficiency in crops. Application of Cu fertilizers to wheat on Cu-deficient soils also generally improved seed quality. Key words: Application time, Cu source, foliar application, granular Cu, growth stage, placement method, rate of Cu, seedrow-placed Cu, soil incorporation, wheat

scholarly journals NUTRIENT COMBINATION WITH BIOCHAR: IMPROVING YIELD AND QUALITY OF JUTE SEED

2020 ◽  
Vol 5 (1) ◽  
pp. 43-50
Author(s):  
Syed Nazrul Islam ◽  
Md. Lutfar Rahman ◽  
Md. Zablul Tareq ◽  
Bornali Mostofa ◽  
Md. Meftahul Karim ◽  
...  
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Organic Fertilizer ◽  
Soil Health ◽  
Growth And Yield ◽  
Yield And Quality ◽  
Living Things ◽  
Set Up ◽  
Cultivation Techniques

Plants are naturally growing on the soil without hampering the eco-friendly environment. Intensive cultivation of crops with high yielding verities (HYV) hampering the soil health resulting unfertile soil. In addition, frequent uses of chemicals as well as overdose of synthetic fertilizer creating hazardous environment for the living things. However, to meet up the demand of foods as well as other basic requirements of increasing population of the world crop cultivation techniques need to be modernized. To overcome this situation, application of organic fertilizer need to apply regularly. Biochar can be a good source of organic fertilizer and it is currently using to improve the soil health globally. To examine the effect of biochar on jute growth and yield an experiment was set up in two different locations (Jute Agriculture Experimental Station (JAES), Manikganj, and Jute Research Sub Station (JRSS), Jashore of Bangladesh) during the period from August to December, 2019. Results revealed that location (JAES) had significant and positive effect on jute physiology and seed yield and as well as seed quality. Among fourteen treatments, treatment T2 (Recommended dose of fertilizer (RDF)) showed the highest plant height (163.5 cm), base diameter (7.44 mm) and pod per plant (16.5) compare to the rest treatments. Treatment T6 (RDF 75% + 25%[email protected]) showed the best seed weight (2.13 g) and seed yield/ plant (3.98 g) among all treatments. Interaction among treatments and locations, T2 x L2 affected seed germination (99%) and field emergence (92.33%) positively. From this research it was cleared that biochar alone may not enough but combination is required for improving jute seed yield and quality.

scholarly journals Effect of head decapitation and planting density on quality seed production of sprouting broccoli (Brassica oleracea var. italica L.)

2015 ◽  
Vol 7 (1) ◽  
pp. 471-476 ◽  
Author(s):  
D.K. Mehta ◽  
Tarun Singh ◽  
Rajesh Kanwar
Keyword(s):  
Brassica Oleracea ◽  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Quality Parameters ◽  
Planting Density ◽  
Plant Spacing ◽  
Yield And Quality ◽  
Number Of Branches

A study was carried out to evaluate the effect of head decapitation and planting density on plant growth, seed yield and quality of sprouting broccoli, Brassica oleracea var. italica L. using cultivar ‘Green Head’. The twenty treatments comprised of combinations of four head decapitation methods viz., D1 (decapitation of primary head at appearance and harvesting seeds from secondary heads), D2 (decapitation of primary head at marketable stage and harvesting seeds from secondary heads), D3 (removal of secondary heads at appearance and harvesting seeds primary head) and ‘D4’ (No decapitation- control) and five planting densities viz., S1 (60x60 cm), S2 (60x45 cm), S3(45x45 cm), S4 (60x30 cm), and S5 (45x30 cm). Decapitation of primary head at appearance and harvesting seeds from secondary heads (D1) and planting density S3 (45x45 cm) independently as well as in combination gave highest seed yield per plot and per hectare. This combination was also found comparable to other combinations for other characters like days to 50% flowering, days to seed harvesting, plant height at harvesting (cm), number of branches per plant, number of siliqua per plant, siliqua length (cm), number of seeds per siliqua and seed quality parameters. Therefore, it is suggested that decapitation of primary head at appearance and harvesting seeds from secondary heads (D1) in combination with plant spacing of 45x45 cm i.e. D1S3 can be recommended for commercial seed production of sprouting broccoli.

scholarly journals Growing season climate affects phenological development, seed yield and seed quality of dill (Anethum graveolens)

2022 ◽  
Author(s):  
Ozlem Alan ◽  
Damla Kanturer ◽  
Alison A. Powell ◽  
Hulya Ilbi
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Quality Parameters ◽  
Production Environment ◽  
Anethum Graveolens ◽  
Yield And Quality ◽  
Flowering Initiation ◽  
Mean Germination Time

Dill seed production was investigated over two seasons, comprising a spring growing cycle (SGC) and an autumn growing cycle (AGC). The effects of growing cycle on phenological traits, yield and quality of dill seeds formed on different umbels of the mother plant were investigated. Significant differences were noted in the flowering period, seed yield and quality parameters. The SGC resulted in a shorter time from sowing to bolting and flowering initiation compared with the AGC. Plant height, number of umbels/plant, number of umbelets/umbel, umbel diameter, umbel length and seed weight/plant increased in the AGC. In contrast, decreased germination at 20/30°C and at 13°C, and increased mean germination time at 20/30°C in AGC indicated lower seed quality compared with SGC. Primary umbels produced the best yield and higher quality seeds, followed by the secondary umbels while tertiary umbels gave poor yield and quality seeds in both SGC and AGC. In conclusion, AGC was advisable for higher seed yield, but SGC resulted in higher seed quality compared with the AGC. This highlights the need to select a suitable growing cycle to guarantee high seed yield and quality for each seed production environment.

Alternative seeding dates (fall and April) affect Brassica napus canola yield and quality

2000 ◽  
Vol 80 (4) ◽  
pp. 713-719 ◽  
Author(s):  
Ken J. Kirkland ◽  
Eric N. Johnson
Keyword(s):  
Brassica Napus ◽  
Seed Yield ◽  
Seed Weight ◽  
Oil Content ◽  
Plant Density ◽  
Yield Response ◽  
Canola Seed ◽  
Yield And Quality ◽  
Seeding Date ◽  
Herbicide Tolerant

Brassica napus L. canola production on the Canadian prairies often is limited by hot, dry growing conditions in early July and a short growing season. Brassica napus canola seeded in the fall just prior to freeze-up or in the early spring as soon as fields are passable may allow canola to avoid these adverse conditions. Our objective was to determine if late October (fall), or mid- to late April (April) seeding dates improve canola yield and quality relative to a mid-May (15 to 20 May) seeding date. Plant density and height, phenological development, seed yield, seed weight and seed oil content were assessed in plots sown to herbicide-tolerant B. napus canola at three seeding dates on five fallow sites and three stubble sites at Scott, SK, from 1994 to 1998. A thinner plant stand occurred for the fall compared with spring seeding dates; however, this difference rarely corresponded with less canola yield. Fifty percent flowering occurred 20 d earlier (June rather than July), reproductive growth (50% flowering to maturity) was 10 d longer, plants were 23 (fall) or 8 (April) cm shorter, and maturity occurred 13 d earlier when canola was seeded in the fall and April compared with mid-May seeding. Canola seed yield was 38% greater when seeded on the alternative dates rather than the more traditional mid-May seeding date. The yield advantage for alternative seeding dates was greater and more consistent on stubble than on fallow likely because of lack of soil crusting and temperature and wind protection from stubble. The response of seed weight to seeding date was similar to that for seed yield, indicating that a portion of the positive yield response to alternative seeding dates was associated with larger seed size. Oil content also was greater for the fall and April compared with mid-May seeding dates, but the improvement was smaller (6%) than that for seed yield. Fall- and April-seed-ed canola tolerated spring frosts and avoided adversely hot, dry weather during the flowering period, thus improving canola seed yield and quality. Alternative seeding dates provide canola producers in semi-arid regions with a sustainable option to diversify their cropping systems. Key words: Seeding date, dormant, stubble, fallow, herbicide tolerant, alternative cropping practice

Sign in / Sign up

Export Citation Format

Share Document