THE CHEMICAL AND MINERALOGICAL COMPOSITION OF SOIL PARENT MATERIALS IN NORTHEAST ALBERTA

1989 ◽  
Vol 69 (4) ◽  
pp. 721-737 ◽  
Author(s):  
G. A. SPIERS ◽  
M. J. DUDAS ◽  
L. W. TURCHENEK
Keyword(s):  
Trace Elements ◽  
Key Words ◽  
Oil Sands ◽  
Clay Mineralogy ◽  
Mineralogical Composition ◽  
Mineral Species ◽  
Athabasca Oil Sands ◽  
Parent Materials ◽  
Minor And Trace Elements ◽  
Trace Element Levels

Seven major parent materials from the Athabasca oil sands area were investigated for detailed mineralogy and chemistry. The clay mineral species identified and quantified were mica, smectite, kaolinite, chlorite and vermiculite. The fine (50–250 μm) sand mineralogical suite was dominated by quartz, with lesser amounts of Na-, K-, and Ca-feldspars, and minor amounts of individual heavy mineral species. Electronoptical examination indicated that the feldspar grains in the parent materials have undergone extensive preglacial weathering. Regional mean levels of all analyzed elements (Al, Ca, Fe, K, Mg, Na, Mn, P, Cr, Co, Cu, Ni, Pb, Sr, V, and Zn), with the exception of Ca, are related to textural variability. The variability of Ca levels within the study area is related to the occurrence of calcareous parent materials. The highest levels of all major, minor, and trace elements were associated with either the Legend unit derived largely from Cretaceous bedrock or with the modern sediments of the Athabasca delta. Key words: Soil parent materials, clay mineralogy, trace element levels, sand mineralogy, feldspar morphology

scholarly journals Sources of particulate matter components in the Athabasca oil sands region: investigation through a comparison of trace element measurement methodologies

2017 ◽  
Vol 17 (15) ◽  
pp. 9435-9449 ◽  
Author(s):  
Catherine Phillips-Smith ◽  
Cheol-Heon Jeong ◽  
Robert M. Healy ◽  
Ewa Dabek-Zlotorzynska ◽  
Valbona Celo ◽  
...  
Keyword(s):  
Trace Elements ◽  
Particulate Matter ◽  
Biomass Burning ◽  
Oil Sands ◽  
Road Dust ◽  
Air Monitoring ◽  
Athabasca Oil Sands ◽  
Athabasca Oil Sands Region ◽  
Haul Road

Abstract. The province of Alberta, Canada, is home to three oil sands regions which, combined, contain the third largest deposit of oil in the world. Of these, the Athabasca oil sands region is the largest. As part of Environment and Climate Change Canada's program in support of the Joint Canada-Alberta Implementation Plan for Oil Sands Monitoring program, concentrations of trace elements in PM2. 5 (particulate matter smaller than 2.5 µm in diameter) were measured through two campaigns that involved different methodologies: a long-term filter campaign and a short-term intensive campaign. In the long-term campaign, 24 h filter samples were collected once every 6 days over a 2-year period (December 2010–November 2012) at three air monitoring stations in the regional municipality of Wood Buffalo. For the intensive campaign (August 2013), hourly measurements were made with an online instrument at one air monitoring station; daily filter samples were also collected. The hourly and 24 h filter data were analyzed individually using positive matrix factorization. Seven emission sources of PM2. 5 trace elements were thereby identified: two types of upgrader emissions, soil, haul road dust, biomass burning, and two sources of mixed origin. The upgrader emissions, soil, and haul road dust sources were identified through both the methodologies and both methodologies identified a mixed source, but these exhibited more differences than similarities. The second upgrader emissions and biomass burning sources were only resolved by the hourly and filter methodologies, respectively. The similarity of the receptor modeling results from the two methodologies provided reassurance as to the identity of the sources. Overall, much of the PM2. 5-related trace elements were found to be anthropogenic, or at least to be aerosolized through anthropogenic activities. These emissions may in part explain the previously reported higher levels of trace elements in snow, water, and biota samples collected near the oil sands operations.

scholarly journals The Effects of Plume Episodes on PAC Profiles in the Athabasca Oil Sands Region

2021 ◽  
pp. 117014
Author(s):  
Narumol Jariyasopit ◽  
Tom Harner ◽  
Cecilia Shin ◽  
Richard Park
Keyword(s):  
Oil Sands ◽  
Athabasca Oil Sands ◽  
Athabasca Oil Sands Region

scholarly journals Identifying Reservoir Features via iSOR Response Behaviour

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 427
Author(s):  
Jingyi Wang ◽  
Ian Gates
Keyword(s):  
Oil Sands ◽  
Gravity Drainage ◽  
Athabasca Oil Sands ◽  
Steam Chamber ◽  
Heterogeneous Reservoirs ◽  
Steam Assisted Gravity Drainage ◽  
Response Behaviour

To extract viscous bitumen from oil sands reservoirs, steam is injected into the formation to lower the bitumen’s viscosity enabling sufficient mobility for its production to the surface. Steam-assisted gravity drainage (SAGD) is the preferred process for Athabasca oil sands reservoirs but its performance suffers in heterogeneous reservoirs leading to an elevated steam-to-oil ratio (SOR) above that which would be observed in a clean oil sands reservoir. This implies that the SOR could be used as a signature to understand the nature of heterogeneities or other features in reservoirs. In the research reported here, the use of the SOR as a signal to provide information on the heterogeneity of the reservoir is explored. The analysis conducted on prototypical reservoirs reveals that the instantaneous SOR (iSOR) can be used to identify reservoir features. The results show that the iSOR profile exhibits specific signatures that can be used to identify when the steam chamber reaches the top of the formation, a lean zone, a top gas zone, and shale layers.

THE CLAY MINERALS IN SOME BRITISH COLUMBIA SUBSOILS

1962 ◽  
Vol 42 (2) ◽  
pp. 296-301 ◽  
Author(s):  
J. S. Clark ◽  
J. E. Brydon ◽  
H. J. Hortie
Keyword(s):  
British Columbia ◽  
Diffraction Analysis ◽  
Clay Minerals ◽  
Clay Mineralogy ◽  
X Ray Diffraction ◽  
The South ◽  
Parent Materials ◽  
X Ray ◽  
Northeastern Part ◽  
Montmorillonitic Clay

X-ray diffraction analysis was used to identify the clay minerals present in fourteen subsoil samples that were selected to represent some more important clay-bearing deposits in British Columbia. The clay mineralogy of the subsoils varied considerably but montmorillonitic clay minerals tended to predominate in the water-laid deposits of the south and illite in the soil parent materials of the Interior Plains region of the northeastern part of the Province.

Sign in / Sign up

Export Citation Format

Share Document