EFFECT OF SUMMERFALLOW TILLAGE ON SOIL PHYSICAL PROPERTIES AND YIELD OF WHEAT

1968 ◽  
Vol 48 (1) ◽  
pp. 21-26 ◽  
Author(s):  
D. A. Dew
Keyword(s):  
Soil Moisture ◽  
Physical Properties ◽  
Black Soil ◽  
Soil Physical Properties ◽  
Nitrate Accumulation ◽  
Soil Zone ◽  
Loam Soil

On a fallow–wheat rotation on a loam soil in the Black soil zone of central Alberta, increased tillage over that required to control weeds had no effect on the yield of wheat. Four operations usually controlled weeds. Extra tillage had little or no effect on soil moisture conserved, wind-erodible aggregates, compaction or nitrate accumulation. Insufficient tillage adversely affected yield, moisture conservation and nitrate accumulation.

scholarly journals Characterizing Soil Physical Properties for Soil Moisture Monitoring with the North Carolina Environment and Climate Observing Network

2012 ◽  
Vol 29 (7) ◽  
pp. 933-943 ◽  
Author(s):  
Weinan Pan ◽  
R. P. Boyles ◽  
J. G. White ◽  
J. L. Heitman
Keyword(s):  
North Carolina ◽  
Soil Moisture ◽  
Physical Properties ◽  
Soil Properties ◽  
Water Content ◽  
Bulk Density ◽  
Soil Physical Properties ◽  
The North ◽  
Wide Range ◽  
Soil Moisture Monitoring

Abstract Soil moisture has important implications for meteorology, climatology, hydrology, and agriculture. This has led to growing interest in development of in situ soil moisture monitoring networks. Measurement interpretation is severely limited without soil property data. In North Carolina, soil moisture has been monitored since 1999 as a routine parameter in the statewide Environment and Climate Observing Network (ECONet), but with little soils information available for ECONet sites. The objective of this paper is to provide soils data for ECONet development. The authors studied soil physical properties at 27 ECONet sites and generated a database with 13 soil physical parameters, including sand, silt, and clay contents; bulk density; total porosity; saturated hydraulic conductivity; air-dried water content; and water retention at six pressures. Soil properties were highly variable among individual ECONet sites [coefficients of variation (CVs) ranging from 12% to 80%]. This wide range of properties suggests very different behavior among sites with respect to soil moisture. A principal component analysis indicated parameter groupings associated primarily with soil texture, bulk density, and air-dried water content accounted for 80% of the total variance in the dataset. These results suggested that a few specific soil properties could be measured to provide an understanding of differences in sites with respect to major soil properties. The authors also illustrate how the measured soil properties have been used to develop new soil moisture products and data screening for the North Carolina ECONet. The methods, analysis, and results presented here have applications to North Carolina and for other regions with heterogeneous soils where soil moisture monitoring is valuable.

Spatial variation in soil physical properties and effects on soil NO3– production on forest hillslopes

2020 ◽  
Author(s):  
Tomoki Oda ◽  
Megumi Kuroiwa ◽  
Naoya Fujime ◽  
Kazuo Isobe ◽  
Naoya Masaoka ◽  
...  
Keyword(s):  
Spatial Distribution ◽  
Soil Moisture ◽  
Physical Properties ◽  
Spatial Variation ◽  
Volcanic Ash ◽  
Surface Soil ◽  
Soil Physical Properties ◽  
Slope Position ◽  
Surface Soil Moisture ◽  
Slope Bottom

<p>Ammonium (NH<sub>4</sub><sup>+</sup>) and nitrate (NO<sub>3</sub><sup>–</sup>) concentrations and production rates in forest soil vary by hillslope position due to variation in ammonia-oxidizing microorganism concentrations, soil chemistry, and surface soil moisture. These spatial distributions have a significant effect on nutrient cycles and streamwater chemistry. Soil moisture conditions significantly restrict microbial activity, influencing the spatial distribution of NO<sub>3</sub><sup>–</sup> concentrations on forest hillslopes. However, studies linking forest hydrological processes to nitrogen cycling are limited. Therefore, we investigated the determinants of spatial variation in soil moisture and evaluated the effects of soil moisture fluctuations on spatial variation in NO<sub>3</sub><sup>–</sup> concentration and production rate.</p><p>The study sites were the Fukuroyamasawa Experimental Watershed (FEW) and Oyasan Experimental Watershed (OEW) in Japan. The two have similar topographies, climates, and tree species. In each watershed, a 100 m transect was set up from the ridge to the base of the slope, and soil moisture sensors were installed at soil depths of 10 cm and 30 cm at both the top and bottom of the slope. We collected surface soil samples at a depth of 10 cm at the top, middle, and bottom of the slopes using 100 cm<sup>3</sup> cores, and measured soil physical properties, particle size distribution, volcanic ash content, chemical properties (pH, NO<sub>3</sub><sup>–</sup>, NH<sub>4</sub><sup>+</sup>, nitrification rate, and mineralization rate), and microbial content (archaeal content). Spatial and temporal changes in soil moisture on the hillslope were calculated using HYDRUS-2D to examine contributing factors of soil moisture.</p><p>At FEW, high NO<sub>3</sub><sup>–</sup> concentrations and nitrification rates were observed only at the slope bottom and middle, and no NO<sub>3</sub><sup>–</sup> concentrations were detected at up slope. By contrast, at OEW, high NO<sub>3</sub><sup>–</sup> concentrations and nitrification rates were observed at all points. NH<sub>4</sub><sup>+</sup> concentrations were similar at all points in both watersheds. At FEW, 10 cm surface soil moisture fluctuated within 25–40% at the slope top but was within 40–50% at the slope bottom. At OEW, surface soil moisture was 30–40% at both the slope top and bottom, with no significant differences according to slope position. It was confirmed that soil moisture was significantly involved in NO<sub>3</sub><sup>– </sup>concentration and nitrification rates. Model simulations showed that the difference in soil moisture fluctuations between FEW and OEW was mainly explained by the spatial variation in soil physical properties. In particular, volcanic ash influenced soil moisture along the entire slope at OEW, resulting in high water retention, but only influenced soil moisture at the slope bottom at FEW. These findings indicate that spatial variability in soil physical properties has a significant effect on soil moisture fluctuation and leads to a spatial distribution of NO<sub>3</sub><sup>–</sup> production.</p>

scholarly journals Impact of recreational transformation of soil physical properties on micromolluscs in an urban park

2021 ◽  
Vol 29 (2) ◽  
pp. 78-87
Author(s):  
V. S. Budakova ◽  
N. V. Yorkina ◽  
P. M. Telyuk ◽  
A. K. Umerova ◽  
O. M. Kunakh ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Soil Moisture ◽  
Physical Properties ◽  
Soil Properties ◽  
Principal Component ◽  
Feature Space ◽  
Penetration Resistance ◽  
Soil Physical Properties ◽  
Urban Park ◽  
Soil Penetration Resistance

The paper assesses the effect of transformation of soil physical properties on the abundance of micromolluscs in the conditions of an urban park. The studies were carried out in Novooleksandrivskiy Park (Melitopol, Ukraine). An experimental polygon was represented by 7 transects with 18 sampling points in each. The interval between the points in the transect, as well as the interval between transects, was 3 meters. The total area of the polygon was 1,134 m2. The tree species growing within the polygon were Quercus robur, Sophora japonica, and Acer campestre. Shrubs were represented by Ulmus laevis, Tilia cordata, Celtis occidentalis, and Morus nigra. The locations of the trees and shrubs were mapped. The crowns of tree and shrub plants formed a dense canopy and a shady light regime. The grass cover was practically absent. The soil mechanical resistance, soil aggregate-size distribution, electrical conductivity of soil, soil moisture and bulk density were measured. We recorded 618 individuals of Vallonia pulchella, 120 individuals of Cochlicopa lubrica, and 58 individuals of Acanthinula aculeata within the surveyed polygon. We extracted three principal components, which could explain 60.9% of the variation in the feature space of the soil properties. The principal component 1 explained 42.0% of the variation of the feature space and depended on the soil penetration resistance throughout the whole profile, aggregate composition, density, electric conductivity and moisture content of soil. This component reflected a tendency for soil penetration resistance and soil density to increase near recreational trails. The principal component 1 was used to indicate the gradient of recreational transformation of the soil. The principal component 2 was able to explain 10.6% of the variation in the feature space. It negatively correlated with the distance from the recreational trail, soil penetration resistance at the depth of 35 cm or more, soil electrical conductivity, and the proportion of aggregates greater than 3 mm in size. This component positively correlated with soil penetration resistance at 0–5 cm depth and the proportion of aggregates less than 0.5 mm in size. This component can be interpreted as a "halo" from the recreational trail, or a gradient of indirect soil transformations adjacent to the zone of intense recreational load. The principal component 3 was able to explain 8.3% of the variation in the feature space. It positively correlated with soil penetration resistance at the depth of 20–40 cm, the proportion of 0.5–7.0 mm aggregates, and soil moisture. It negatively correlated with the proportion of aggregates larger than 7 mm and smaller than 0.25 mm. This component indicated a variation in soil properties that was induced by causes independent of recreational exposure. The extracted gradients of soil properties significantly influenced the abundance of micromollusc populations. The abundance of all species decreased after increase in recreational load. Micromollusc species responded to direct recreational exposure as plateau (C. lubrica) and asymmetric unimodal responses (V. pulchella and A. aculeata).

scholarly journals Effect of amount and time of incorporation of forest litter on soil physical properties

2020 ◽  
Vol 15 (2) ◽  
pp. 68-74
Author(s):  
Paardensha Ivy Chinir ◽  
Manoj Dutta ◽  
Rizongba Kichu ◽  
Sewak Ram
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Physical Properties ◽  
Soil Moisture Content ◽  
Particle Density ◽  
Forest Litter ◽  
Soil Physical Properties ◽  
Mean Weight Diameter ◽  
The Difference ◽  
Water Holding

A field experiment was conducted to evaluate the effect of forest litter and its time of incorporation on soil physical properties. The study showed that plots with forest litter incorporated at 45 DBS (Days Before Sowing) had significantly higher soil moisture content as compared to those incorporated at 30 DBS after 30 and 60 DAS. However, the difference in the time of incorporation had no significant effect on soil moisture content at 90 DAS. At 30 DAS, application of forest litter @ 6 t ha-1 and 9 t ha-1 significantly increased the soil moisture content at a rate of 4.11 and 11.42 per cent, respectively over control. At 60 DAS, application of forest litter @ 3 t ha-1, 6 t ha-1 and 9 t ha-1 significantly increased the soil moisture content at the rate of 15.05, 17.26 and 25.65 per cent, respectively over control. At 90 DAS, a trend was noticed which showed that soil moisture content significantly increased at a progressive rate with each increase in the dose of forest litter application. At 90 DAS, the addition of forest litter @ 3 t ha-1, 6 t ha-1and 9 t ha-1 increased the soil moisture content @ 10.16, 17.84 and 22.20 per cent, respectively over control. The plots with forest litter incorporated at 45 DBS had significantly higher hydraulic conductivity, per cent aggregates and mean weight diameter as compared to those incorporated at 30 DBS. However, the difference in the time of incorporation i.e., at 30 and 45 DBS had no significant effect on bulk density, particle density and water holding capacity. Incorporation of forest litter @ 3 t ha-1, 6 t ha-1 and 9 t ha-1 significantly decreased the bulk density at the rate of 3.67, 8.65 and 14.14 per cent; while particle density increased at the rate of 2.59, 3.42 and 6.61 per cent, respectively when compared to control. The addition of forest litter @ 3 t ha-1, 6 t ha-1 and 9 t ha-1 resulted in a significant increase in water holding capacity and hydraulic conductivity at a rate of 3.72, 4.65 and 6.77 per cent and 24.13, 32.30 and 41.73 per cent, respectively over control. Further, the application of forest litter @ 3t ha-1, 6 t ha-1 and 9 t ha-1 significantly increased the per cent aggregate and mean weight diameter of the soil @ 1.77, 3.49 and 6.58 per cent 17.31, 26.28 and 41.35 per cent, respectively over control. The study revealed that incorporating 9 t ha-1 of forest litter at 45 DBS had the most beneficial effect on soil physical properties.

scholarly journals Physical Properties of Texturally Different Soils After Application of Biochar Substrates

2020 ◽  
Vol 66 (2) ◽  
pp. 45-55
Author(s):  
Dušan Šrank ◽  
Vladimír Šimanský
Keyword(s):  
Soil Moisture ◽  
Physical Properties ◽  
Sandy Soil ◽  
Farmyard Manure ◽  
Total Porosity ◽  
Soil Physical Properties ◽  
Climatic Conditions ◽  
Soil Amelioration ◽  
Loamy Soil ◽  
Different Soils

AbstractScientific studies show that the efficiency of biochar can be improved by its combination with other fertilisers. For this reason, fertiliser manufacturers are working to create products that combine biochar with other soil fertility enhancers suitable for different soil-climatic conditions. In this study, two types of biochar substrates (1. biochar blended with farmyard manure, and 2. biochar blended with farmyard manure as well as with digestate) at rates of 10 and 20 t/ha were applied alone or in combination with other manure and mineral fertilisers. These were added to Arenosol (sandy soil, Dolná Streda, Slovakia) and Chernozem (loamy soil, Veľké Úľany, Slovakia) to evaluate the soil physical properties to test the potential of these amendments for soil amelioration in texturally different soils. The results showed that the application of biochar substrates alone increased soil moisture, the volume of capillary pores, and decreased aeration and volume of non-capillary pores. The application of biochar substrates with mineral fertilisers increased aeration, content of water-stable macro-aggregates (WSAma), total porosity, and decreased soil moisture and the content of water-stable micro-aggregates (WSAmi) in sandy soil. In loamy soil, when compared to unfertilised control, the biochar treatments increased content of WSAma, content of dry-sieved macro-aggregates, and decreased content of WSAmi and content of dry-sieved micro-aggregates. The combination of biochar substrates together with manure had no effect on changes in the physical properties of loamy soil.

The capacity of urban forest patches to infiltrate stormwater is influenced by soil physical properties and soil moisture

2019 ◽  
Vol 246 ◽  
pp. 11-18 ◽  
Author(s):  
Tuana H. Phillips ◽  
Matthew E. Baker ◽  
Katie Lautar ◽  
Ian Yesilonis ◽  
Mitchell A. Pavao-Zuckerman
Keyword(s):  
Soil Moisture ◽  
Physical Properties ◽  
Urban Forest ◽  
Soil Physical Properties ◽  
Forest Patches
Sign in / Sign up

Export Citation Format

Share Document