Genetic parameters among growth and carcass traits of Canadian Charolais cattle

2004 ◽  
Vol 84 (4) ◽  
pp. 589-597 ◽  
Author(s):  
D. H. Crews ◽  
Jr., M. Lowerison ◽  
N. Caron ◽  
R. A. Kemp
Keyword(s):  
Fixed Effects ◽  
Genetic Parameters ◽  
Growth Traits ◽  
Carcass Traits ◽  
Genetic Correlations ◽  
Subcutaneous Fat ◽  
Field Performance ◽  
Pedigree Data ◽  
Marbling Score ◽  
Muscle Area

Genetic parameters for three growth and five carcass traits were estimated for Charolais using a combination of carcass progeny test, purebred field performance and pedigree data. Heritabilities and genetic and residual correlations were derived from variance components for birth weight (BWT, n = 54 221), 205-d weaning weight (WT205, n = 31 384), postweaning gain (PWG, n = 19 403), hot carcass weight (HCW, n = 6958), average subcutaneous fat thickness (FAT, n = 6866), longissimus muscle area (REA, n = 6863), marbling score (MAR, n = 6903) and estimated carcass lean yield percentage (PLY, n = 6852) with an animal model (n = 78 728) and restricted maximum likelihood. Breed of dam and contemporary group appropriate to each trait were included as fixed effects in the model, whereas random effects included direct genetic for all traits, maternal genetic for BWT and WT205, and maternal permanent environmental for WT205. Carcass traits were adjusted to a constant harvest age of 425 d. Heritability estimates of 0.53, 0.22, and 0.21 were obtained for direct components of BWT, WT205, and PWG, respectively, and maternal heritabilities were 0.16 and 0.10 for BWT and WT205, respectively. Direct × maternal genetic correlations for BWT (-0.49) and WT205 (-0.35) were negative. Heritabilities for HCW, FAT, REA, MAR, and PLY were 0.33, 0.39, 0.43, 0.34, and 0.46, respectively. Genetic correlations among direct effects for growth traits were moderately positive and generally uncorrelated with maternal effects across traits. Lean and fat deposition in the carcass generally had negative, unfavorable genetic correlations, although improvement in lean yield and marbling score may not be strongly antagonistic. Genetic correlations of direct and maternal components of growth traits with carcass traits suggested that selection for increased growth rate would not be antagonistic to improvement in carcass yield or meat quality. Key words: Carcass, Charolais, correlation, genetic parameters, growth

Genetic parameters for growth and carcass traits of Japanese Black (Wagyu) cattle

2000 ◽  
Vol 71 (1) ◽  
pp. 59-64 ◽  
Author(s):  
T. Oikawa ◽  
T. Sanehira ◽  
K. Sato ◽  
Y. Mizoguchi ◽  
H. Yamamoto ◽  
...  
Keyword(s):  
Body Weight ◽  
Genetic Parameters ◽  
Growth Traits ◽  
Average Daily Gain ◽  
Carcass Traits ◽  
Genetic Correlations ◽  
Subcutaneous Fat ◽  
Marbling Score ◽  
Data Set ◽  
Pooled Data

AbstractRestricted maximum likelihood analyses fitting an animal model were conducted to estimate genetic parameters with a pooled-data set of performance tests (growth traits and food intake) on 661 bulls and progeny tests (growth traits and carcass traits) on 535 steers. Traits studied included concentrate intake (CONC), roughage intake (ROU), TDN conversion (TCNV), TDN intake (TINT) of bulls; rib eye area (REA), marbling score (MARB), dressing proportion (DRES) and subcutaneous fat depth (SCF) of steers. Body weight at start (BWS), body weight at finish (BWF) and average daily gain (ADG) of all animals were measured. Estimated heritabilities were 0·18 (CONC), 0·71 (ROU), 0·11 (TCNV) and 0·36 (TINT); 0·02 (REA), 0·49 (MARB), 0·15 (DRES), 0·15 (SCF), and from 0·20 to 0·38 for growth traits. Genetic correlations of ROU were different from those of CONC, probably due to inconsistent restrictions on concentrate intake; those of TINT with the weights, ADG and SCF were high. MARB showed positive genetic correlations with growth traits and low correlations with TINT and SCF. High potentiality for improvement of marbling score was suggested.

scholarly journals Estimation of Genetic Parameters and Correlation between Yearling Ultrasound Measurements and Carcass Traits in Hanwoo Cattle

Animals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1425
Author(s):  
Masoumeh Naserkheil ◽  
Deuk-Hwan Lee ◽  
Hong-Sik Kong ◽  
Jiyeon Seong ◽  
Hossein Mehrban
Keyword(s):  
Genetic Correlation ◽  
Genetic Parameters ◽  
Carcass Traits ◽  
Genetic Correlations ◽  
Backfat Thickness ◽  
Marbling Score ◽  
Muscle Area ◽  
Eye Muscle ◽  
Ultrasound Measurements ◽  
Heritability Estimates

Genetic parameters have a significant role in designing a breeding program and are required to evaluate economically important traits. The objective of this study was to estimate heritability and genetic correlation between yearling ultrasound measurements, such as backfat thickness (UBFT), eye muscle area (UEMA), intramuscular fat content (UIMF), and carcass traits, such as backfat thickness (BFT), carcass weight (CW), eye muscle area (EMA), marbling score (MS) at approximately 24 months of age, as well as yearling weight (YW) in Hanwoo bulls (15,796) and steers (5682). The (co) variance components were estimated using a multi-trait animal model. Moderate to high heritability estimates were obtained and were 0.42, 0.50, 0.56, and 0.59 for CW, EMA, BFT, and MS, respectively. Heritability estimates for yearling measurements of YW, UEMA, UBFT, and UIMF were 0.31, 0.32, 0.30, and 0.19, respectively. Favorable and strong genetic correlations were observed between UIMF and MS (0.78), UBFT and BFT (0.63), and UEMA and EMA (0.65). Moreover, the estimated genetic correlation between YW and CW was high (0.84) and relatively moderate between YW and EMA (0.43). These results suggest that genetic improvement can be achieved for carcass traits when using yearling ultrasound measurements as selection criteria in ongoing Hanwoo breeding programs.

Genetic parameters for reproductive performance of breeding cows and carcass traits of fattening animals in Japanese Black (Wagyu) cattle

2004 ◽  
Vol 78 (2) ◽  
pp. 195-201 ◽  
Author(s):  
K. Oyama ◽  
T. Katsuta ◽  
K. Anada ◽  
F. Mukai
Keyword(s):  
Reproductive Performance ◽  
Genetic Parameters ◽  
Genetic Relationships ◽  
Carcass Traits ◽  
Genetic Correlations ◽  
Subcutaneous Fat ◽  
Reproductive Traits ◽  
Gestation Length ◽  
Marbling Score ◽  
Selection For

AbstractReproductive performance is receiving increased attention from beef cattle producers. There are concerns that intensive selection for carcass traits might reduce the reproductive performance of females. Genetic parameters among six carcass traits and, age at first calving (AFC), gestation length (GL), days open (DO) and calving interval (CI) under year-round artificial insemination were estimated. Reproductive traits were extracted from 174005 calving records of Japanese Black cows and were analysed with 31364 carcass records. The restricted maximum likelihood procedure under animal models was used to estimate the parameters. Heritabilities of AFC, GL, DO and CI were estimated to be 0.20, 0.40, 0.05 and 0.05, respectively, and those of carcass traits were higher, ranging from 0.38 to 0.56. Genetic correlations of CI with AFC and GL were 0.25 and 0.16, respectively, while no relationship was observed between AFC and GL. Correlations among carcass traits were generally favourable and a slightly negative estimate was obtained between subcutaneous fat thickness and marbling score. Genetic correlations for AFC were -0.27 with carcass weight and -0.24 with marbling score. In contrast, GL, DO and CI were genetically independent of carcass traits. Genetic relationships between reproductive and carcass traits were generally low, and therefore serious antagonism was not observed. The results suggested that selection for carcass traits would not compromise genetic progress in reproductive traits.

scholarly journals Estimation of Genetic Parameters for Pork Quality, Novel Carcass, Primal-Cut and Growth Traits in Duroc Pigs

Animals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 779 ◽  
Author(s):  
Hannah E. Willson ◽  
Hinayah Rojas de Oliveira ◽  
Allan P. Schinckel ◽  
Daniela Grossi ◽  
Luiz F. Brito
Keyword(s):  
Genetic Parameters ◽  
Growth Traits ◽  
Low Cost ◽  
Selection Index ◽  
Carcass Traits ◽  
Genetic Correlations ◽  
Pork Quality ◽  
Production Traits ◽  
Genetic Progress ◽  
Selection Indexes

More recently, swine breeding programs have aimed to include pork quality and novel carcass (e.g., specific primal cuts such as the Boston butt or belly that are not commonly used in selection indexes) and belly traits together with growth, feed efficiency and carcass leanness in the selection indexes of terminal-sire lines, in order to efficiently produce pork with improved quality at a low cost to consumers. In this context, the success of genetic selection for such traits relies on accurate estimates of heritabilities and genetic correlations between traits. The objective of this study was to estimate genetic parameters for 39 traits in Duroc pigs (three growth, eight conventional carcass (commonly measured production traits; e.g., backfat depth), 10 pork quality and 18 novel carcass traits). Phenotypic measurements were collected on 2583 purebred Duroc gilts, and the variance components were estimated using both univariate and bivariate models and REML procedures. Moderate to high heritability estimates were found for most traits, while genetic correlations tended to be low to moderate overall. Moderate to high genetic correlations were found between growth, primal-cuts and novel carcass traits, while low to moderate correlations were found between pork quality and growth and carcass traits. Some genetic antagonisms were observed, but they are of low to moderate magnitude. This indicates that genetic progress can be achieved for all traits when using an adequate selection index.

Genetic parameters for terminal sires estimated using data of progeny from Border Leicester × Merino ewes

1995 ◽  
Vol 46 (4) ◽  
pp. 703
Author(s):  
PA Kenney ◽  
ME Goddard ◽  
LP Thatcher
Keyword(s):  
Genetic Parameters ◽  
Selection Index ◽  
Genetic Correlations ◽  
Subcutaneous Fat ◽  
Muscle Area ◽  
Eye Muscle ◽  
Bone Length ◽  
Selection For ◽  
Using Data ◽  
Omental Fat

Three and a half thousand lambs from Border Leicester x Merino ewes mated to 133 sires from five Poll Dorset, one White Suffolk, one Siromt, two Meridale and four Merino studs were slaughtered, their carcasses halved and one side divided into six primals. Subcutaneous fat was dissected from all six primals, and bone from only the three rear primals. There were four slaughter groups: average slaughter weights of 30 and 35 kg for ewes and 35 and 45 kg for cryptorchids. Heritabilities and phenotypic and genetic correlations for all traits measured (>50) are published in an appendix. Where comparisons were available, estimates were similar to those for purebred animals. Genetic parameters for various assessments of fat were similar except for channel and omental fat. The GR fat depth was the best predictor for total subcutaneous fat, cannon bone length for total bone, and eye muscle area for total soft tissue. Carcass weight and GR appear to be the most important measurements for use in selection for breeding of sires for the prime lamb industry. Slaughter weight and fat depth at the C site could be used as suitable alternatives on live animals. Production of lean meat is not likely to be increased greatly by including measurements other than liveweight and GR in a selection index. Of the other measurements bone length and eye muscle measurements showed most promise.

scholarly journals EFFECT OF FIXED FACTORS AND ESTIMATION OF GENETIC PARAMETERS OF GROWTH TRAITS FOR MOUNTAIN KIDS

2019 ◽  
Vol 50 (6) ◽  
Author(s):  
Hermiz & Baper
Keyword(s):  
Variance Components ◽  
Fixed Effects ◽  
Genetic Parameters ◽  
Maximum Likelihood Method ◽  
Growth Traits ◽  
Genetic Correlations ◽  
Likelihood Method ◽  
Phenotypic Correlations ◽  
Body Weights ◽  
Genetic And Phenotypic Correlations

Body weights at birth (469), weaning (394) and at six month of age (358) for kids utilized in this study were raised at private project in Duhok governorate, Iraq during two kidding season (2016-2017) and (2017-2018). GLM within SAS programme was used to analyze the data which include the fixed effects (age of doe, year and season of kidding, sex of kid and type of birth, regression on doe weight at kidding, and the regression of later weights of kids on earlier weights) influencing the studied traits. Restricted Maximum Likelihood Method was used to estimate repeatability, heritability, genetic and phenotypic correlations after adjusting the records for fixed effects. Variance components of random effects were tested for positive definite. Overall mean of weights at birth (BWT), weaning (WWT) and 6 month of age (WT6M) were 2.92, 15.32 and 24.45 kg, respectively. Differences among groups of age of doe in all studied traits were not significant, while year of kidding and sex of kid affect all traits significantly (p<0.01). Season of kidding affect BWT and WWT significantly (P<0.01). Single born kids were heavier (P<0.01) than twins in BWT only. Regression of BWT on doe weight at kidding (0.033 kg/kg) was significant (P<0.01), while the regressions of WWT and WT6M were not significant. The regression coefficients of WWT on BWT (1.906 kg/kg) and of WT6M on WWT (0.835 kg/kg) were highly significant (P<0.01). Repeatability estimates for BWT, WWT and WT6M were 0.47, 0.45 and 0.35, respectively; on the same order the estimates of heritability were 0.41, 0.61 and 0.79. Genetic correlations between BWT with each of WWT (0.45) and WT6M (0.55), and between WWT and WT6M (0.68) were highly significant. All phenotypic correlations between each pair of body weights were higher than genetic correlations and ranged between 0.48 and 0.73.

scholarly journals Estimation of Genetic Correlations of Primal Cut Yields with Carcass Traits in Hanwoo Beef Cattle

Animals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 3102
Author(s):  
Masoumeh Naserkheil ◽  
Deukmin Lee ◽  
Kihoon Chung ◽  
Mi Na Park ◽  
Hossein Mehrban
Keyword(s):  
Consumer Preferences ◽  
Carcass Traits ◽  
Genetic Correlations ◽  
Market Price ◽  
Marbling Score ◽  
Beef Industry ◽  
Genetic Progress ◽  
Muscle Area ◽  
Eye Muscle ◽  
Hanwoo Cattle

This study was carried out to estimate the variance components, heritability, and genetic correlations between the carcass traits and primal cut yields in Hanwoo cattle. Carcass traits comprising 5622 records included back fat thickness (BFT), carcass weight (CW), eye muscle area (EMA), and marbling score (MS). The 10 primal cut yields from 3467 Hanwoo steers included the tenderloin (TLN), sirloin (SLN), striploin (STLN), chuck (CHK), brisket (BSK), top round (TRD), bottom round (BRD), rib (RB), shank (SK), and flank (FK). In addition, three composite traits were formed by combining primal cut yields as novel traits according to consumer preferences and market price: high-value cuts (HVC), medium-value cuts (MVC), and low-value cuts (LVC). Heritability estimates for the interest of traits were moderate to high, ranging from 0.21 ± 0.04 for CHK to 0.59 ± 0.05 for MS. Except genetic correlations between RB and other primal cut traits, favorable and moderate to high correlations were observed among the yields of primal cut that ranged from 0.38 ± 0.14 (CHK and FK) to 0.93 ± 0.01 (TRD and BRD). Moreover, the estimated genetic correlations of CW and EMA with primal cut yields and three composite traits were positive and moderate to strong, except for BFT, which was negative. These results indicate that genetic progress can be achieved for all traits, and selection to increase the yields of primal cuts can lead to considerable profitability in the Hanwoo beef industry.

scholarly journals 69 A new frame score system for Nelore cattle

2020 ◽  
Vol 98 (Supplement_4) ◽  
pp. 47-47
Author(s):  
Roberto D Sainz ◽  
Nayanny Guimarães ◽  
Cláudio U Magnabosco ◽  
Fernando Lopes
Keyword(s):  
Body Composition ◽  
Beef Cattle ◽  
Genetic Parameters ◽  
Genetic Correlations ◽  
Subcutaneous Fat ◽  
Heritability Estimate ◽  
Reproductive Traits ◽  
Carcass Weight ◽  
Muscle Area ◽  
Nelore Cattle

Abstract Frame score (FS) systems for beef cattle generally represent the relationships among growth, body composition, reproduction and mature size, in a simple and practical form. This study aimed to: 1) develop a FS system for Nelore cattle that is biologically sound, easy to interpret, and useful for producers; and 2) estimate the genetic parameters of the FS with productive and reproductive traits. An arbitrary scale (1 to 12) was devised so that each unit corresponds to 15 kg of carcass weight (1 @), as this is a common measure used for marketing beef cattle in Brazil. Therefore, ideal carcass weight, defined as having 6 mm of backfat, would be 18 @ (269 kg) and 15 @ (224 kg) for FS = 6 males and females, respectively. Data from 36,030 animals (22,405 males, 13,565 females) raised on pasture were obtained from participating herds of the National Association of Breeders and Researchers (ANCP). Genetic parameters were estimated in uni- and bicharacteristic analyses under an animal model, using the EM-REML algorithm (AIREMLF90) and Bayesian inference (GIBBS1F90). The heritability estimate for the new FS was 0.38, and its additive genetic correlations were 0.70, 0.72, 0.77, 0.33, -0.57, 0.27, and 0.28 with BW at 365 d, BW at 450 d, hip height, longissimus muscle area, subcutaneous fat thickness, scrotal circumference at 450 d, and age at first calving, respectively. The estimated heritability and genetic correlations indicate that there is enough additive genetic variability to allow for genetic response to selection. The estimates support the notion that larger frame animals are taller, heavier, leaner and later maturing, both in body composition as well as sexually. The new frame score may be a useful tool for genetic selection of animals that are best suited to their environment.

scholarly journals Estimation of Genetic Parameters by Single-Trait and Multi-Trait Models for Carcass Traits in Hanwoo Cattle

Animals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1061
Author(s):  
Swati Srivastava ◽  
Bryan Irvine Lopez ◽  
Sara de las Heras-Saldana ◽  
Jong-Eun Park ◽  
Dong-Hyun Shin ◽  
...  
Keyword(s):  
Genetic Parameters ◽  
Carcass Traits ◽  
Meat Production ◽  
Nucleotide Polymorphisms ◽  
Genomic Information ◽  
Marbling Score ◽  
Muscle Area ◽  
Eye Muscle ◽  
Hanwoo Cattle ◽  
Genomic Model

Hanwoo breed is preferred in South Korea because of the high standards in marbling and the palatability of its meat. Numerous studies have been conducted and are ongoing to increase the meat production and quality in this beef population. The aim of this study was to estimate and compare genetic parameters for carcass traits using BLUPF90 software. Four models were constructed, single trait pedigree model (STPM), single-trait genomic model (STGM), multi-trait pedigree model (MTPM), and multi-trait genomic model (MTGM), using the pedigree, phenotype, and genomic information of 7991 Hanwoo cattle. Four carcass traits were evaluated: Back fat thickness (BFT), carcass weight (CWT), eye muscle area (EMA), and marbling score (MS). Heritability estimates of 0.40 and 0.41 for BFT, 0.33 and 0.34 for CWT, 0.36 and 0.37 for EMA, and 0.35 and 0.38 for MS were obtained for the single-trait pedigree model and the multi-trait pedigree model, respectively, in Hanwoo. Further, the genomic model showed more improved results compared to the pedigree model, with heritability of 0.39 (CWT), 0.39 (EMA), and 0.46 (MS), except for 0.39 (BFT), which may be due to random events. Utilization of genomic information in the form of single nucleotide polymorphisms (SNPs) has allowed more capturing of the variance from the traits improving the variance components.

Heritability and correlation estimates of Warner-Bratzler shear force and carcass traits from Angus-, Charolais-, Hereford-, and Simmental-sired cattle

2004 ◽  
Vol 84 (4) ◽  
pp. 599-609 ◽  
Author(s):  
J. A. Minick ◽  
M. E. Dikeman ◽  
E. J. Pollak ◽  
D. E. Wilson
Keyword(s):  
Beef Cattle ◽  
Key Words ◽  
Shear Force ◽  
Genetic Parameters ◽  
Carcass Traits ◽  
Genetic Correlations ◽  
Carcass Weight ◽  
Carcass Quality ◽  
Marbling Score ◽  
Ribeye Area

Heritabilities and correlations of Warner-Bratzler shear force (WBSF), marbling score (MS), hot carcass weight (HCW),12–13th rib-fat (FAT), and ribeye area (REA) were calculated from 3360 Angus-, Charolais-, Hereford-, and Simmental-sired cattle in the C attleman’s Beef Board Carcass Merit Project. The heritabilities (± SE) for WBSF, MS, HCW, FAT, and REA were 0.34 ± 0.25, 0.43 ± 0.28, 0.73 ± 0.35, 0.16 ± 0.19, and 0.56 ± 0.31 in Angus; 0.43 ± 0.22, 0.30 ± 0.18, 0.21 ± 0.16, 0.35 ± 0.20, and 0.23 ± 0.16 in Charolais; 0.12 ± 0.11, 0.55 ± 0.22, 0.20 ± 0.14, 0.25 ± 0.15 and 0.34 ± 0.17 in Hereford; and 0.16 ± 0.14, 0.44 ± 0.20, 0.45 ± 0.20, 0.23 ± 0.16, and 0.30 ± 0.18 in Simmental. The genetic correlations, averaged across analysis type, for WBSF-MS, WBSF-HCW, WBSF-FAT, WBSF-REA, MS-HCW, MS-FAT, MS-REA, HCW-FAT, HCW-REA, and FAT-REA were -0.17, 0.32, -0.23, 0.30, 0.10, -0.17, 0.39, -0.15, 0.68, and -0.86 in Angus; -0.42, 0.77, 0.52, -0.05, -0.44, -0.22, -0.19, 0.66, -0.05, and -0.24 in Charolais; -0.43, -0.04, -0.33, 0.09, 0.08, 0.79, -0.14, -0.26, 0.50, and -0.38 in Hereford; and 0.55, 0.08, 0.62, -0.08, 0.30, 0.61, -0.14, 0.06, 0.65, and -0.48 in Simmental. Key words: Beef cattle, genetic parameters, carcass quality, tenderness

Sign in / Sign up

Export Citation Format

Share Document