scholarly journals A comprehensive physicochemical, thermal, and spectroscopic characterization of zinc (II) chloride using X-ray diffraction, particle size distribution, differential scanning calorimetry, thermogravimetric analysis/differential thermogravimetric analysis, ultraviolet-visible, and Fourier transform-infrared spectroscopy

2017 ◽  
Vol 7 (1) ◽  
pp. 33 ◽  
Author(s):  
Snehasis Jana ◽  
MahendraKumar Trivedi ◽  
KalyanKumar Sethi ◽  
Parthasarathi Panda
Keyword(s):  
Differential Scanning Calorimetry ◽  
Particle Size ◽  
Fourier Transform ◽  
Thermogravimetric Analysis ◽  
Spectroscopic Characterization ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Differential Thermogravimetric Analysis

Preparation and Characterization of (Ba0.88Ca0.12)(Zr0.12Ti0.88)O3 Powders and Ceramics Produced by Sol-Gel Process

2010 ◽  
Vol 148-149 ◽  
pp. 1062-1066 ◽  
Author(s):  
Ren Bo Yang ◽  
Wei Guo Fu ◽  
Xiang Yun Deng ◽  
Zhong Wen Tan ◽  
Yan Jie Zhang ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Particle Size ◽  
Piezoelectric Coefficient ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Thermo Gravimetric ◽  
X Ray ◽  
Sol Gel Process

The (Ba0.88Ca0.12)( Zr0.12Ti0.88)O3 powders and piezoelectric ceramics were prepared by sol-gel process. The reaction process was analyzed with the help of thermo gravimetric and differential scanning calorimetry. X-ray diffraction characterized results showed that the structure of the (Ba0.88Ca0.12)( Zr0.12Ti0.88)O3 powders was perovskite structure and the particle size was approximately 37nm. Piezoelectric measurements revealed that Curie temperature and the maximum piezoelectric coefficient d33 is 95°C and 215pm/V, respectively.

Synthesis, characterization, and structures of zircona- and boracyclosiloxanes with ferrocenyl substituents

2002 ◽  
Vol 80 (11) ◽  
pp. 1469-1480 ◽  
Author(s):  
Karena Thieme ◽  
Sara C Bourke ◽  
Juan Zheng ◽  
Mark J MacLachlan ◽  
Fojan Zamanian ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Differential Scanning Calorimetry ◽  
Thermogravimetric Analysis ◽  
Ring Opening ◽  
Ring Opening Polymerization ◽  
The Novel ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Multinuclear Nmr Spectroscopy

The novel zirconatetraferrocenylcyclotrisiloxane Cp2Zr(OSiFc2)2O (6), dizirconatetraferrocenylcyclotetrasiloxane [Cp2Zr(OSiFc2)O]2 (7), boratetraferrocenylcyclotrisiloxane (C6H5)B(OSiFc2)2O (8), and diboratetraferrocenylcyclotetrasiloxane [(C6H5)B(OSiFc2)O]2 (9) with ferrocenyl (Fc = Fe(η-C5H4)(η-C5H5)) substituents at silicon have been prepared from the reactions of Cp2Zr(NMe2)2 and PhBCl2 with diferrocenylsilanediol Fc2Si(OH)2 (3) and tetraferrocenyldisiloxanediol [Fc2SiOH]2O (5). The compounds were characterized by mass spectrometry, elemental analysis, UV–vis, IR, Raman, and multinuclear NMR spectroscopy, as well as single crystal X-ray diffraction. Thermogravimetric analysis and differential scanning calorimetry investigation of 6–9 showed that the cycles decompose before they can undergo any thermal ring-opening polymerization. In addition, no polymerization was detected in the presence of either KOSiMe3 or HOTf. The bulky ferrocenyl substituents on the Si atoms are likely to be at least partially responsible for the inability of these heterocycles to undergo ring-opening polymerization. Key words: heterocyclosiloxanes, ferrocenyl.

Characterization of clays and the technology of Roman ceramics production

Clay Minerals ◽  
2018 ◽  
Vol 53 (3) ◽  
pp. 413-429 ◽  
Author(s):  
Letizia Ceccarelli ◽  
Maurizio Pietro Bellotto ◽  
Marco Caruso ◽  
Cinzia Cristiani ◽  
Giovanni Dotelli ◽  
...  
Keyword(s):  
Fourier Transform ◽  
First Century ◽  
X Ray Diffraction ◽  
Local Clay ◽  
X Ray ◽  
Ancient Technology ◽  
Differential Thermogravimetric Analysis ◽  
The Rich ◽  
Clay Materials

ABSTRACTThe recent discovery of a Roman ceramics manufacturing workshop at Montelabate (Perugia, Italy), in use from the first century BC until the late-fourth to fifth centuries AD, offers a unique opportunity to study the technical processes for producing Roman amphorae. Ancient and modern clays were sampled and analysed; they do not differ significantly, supporting the hypothesis of the exploitation of the rich local clay source that allowed a continuity of production. Characterization of the clays was performed using geotechnical methods (Atterberg limits and size distribution) and by thermogravimetric and differential thermogravimetric analysis, Fourier-transform infrared spectroscopy, X-ray diffraction and X-ray fluorescence analyses. The material was suitable for pottery making with the addition of calcite and quartz sand temper. Production waste and discarded materials as well as good-quality products were also analysed with the same methodology. It is therefore possible to reconstruct the ancient technology by defining the recipe for the production of the amphorae and their firing temperature on the basis of the decomposition of clay materials and the presence of newly formed minerals.

scholarly journals Phase Transformation and Microstructure Characterization of Ceramic Porcelain with Different Ratio of Treated Fgd Sludge/Feldspar

2021 ◽  
Vol 2129 (1) ◽  
pp. 012092
Author(s):  
Suffi Irni Alias ◽  
Banjuraizah Johar ◽  
Syed Nuzul Fadzli Adam ◽  
Mustaffa Ali Azhar Taib ◽  
Fatin Fatini Othman ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Xrd Analysis ◽  
High Energy ◽  
Hydraulic Press ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Sludge Waste ◽  
Main Component

Abstract The porcelain formulation containing percentages of treated FGD sludge waste from 5% up to 15% in replacement of feldspar were prepared. The porcelain mixture formulation were mixed by high energy planatery mill at speed 300 rpm for 1 hours. The powder were compacted by using hydraulic press and sintered at temperature 1200 °C for 3 hours. The sintered samples were characterized using X-ray fluorescene (XRF), X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) and Thermogravimetry/Differential scanning calorimetry (TGA/DCS). The primary effect concerning the addition of treated FGD sludge was the change of intensity composition (gypsum and anhydrate) in porcelain formulation. The XRD analysis has shown that the main component in sludge waste were gypsum and anhydrate.

scholarly journals Solvate Formation of Bis(demethoxy)curcumin: Screening and Characterization

Crystals ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 407 ◽  
Author(s):  
Lina Yuan ◽  
Heike Lorenz
Keyword(s):  
Differential Scanning Calorimetry ◽  
Thermogravimetric Analysis ◽  
Mass Loss ◽  
Storage Conditions ◽  
Stoichiometric Ratio ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Thermal Stabilities ◽  
X Ray ◽  
Ambient Storage

Solvate formation of bis(demethoxy)curcumin (BDMC) was screened. Six solvates were obtained out of the nineteen solvents investigated. In the present work, three solvates, i.e., BDMC-tetrahydrofuran (THF), BDMC-1,4-dioxane (DIO) and BDMC-dimethyl sulfoxide (DMSO), were thoroughly studied. Their desolvation processes were characterized by temperature-resolved powder X-ray diffraction (TR-PXRD), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), and hot-stage microscopy (HSM). TR-PXRD shows that all the solvates desolvate as the mother BDMC form and no new polymorph could be obtained. The stoichiometric ratio of solvates was calculated via the mass loss of solvents determined by TGA. The thermal stabilities of the solvates were obtained from DSC data and followed the order: BDMC-DMSO > -THF > -DIO. Moreover, stability performances at ambient storage conditions recorded by PXRD show that BDMC-DMSO was stable over three months.

Characterization of New Cocrystals by Raman Spectroscopy, Powder X-ray Diffraction, Differential Scanning Calorimetry, and Transmission Raman Spectroscopy

2010 ◽  
Vol 10 (5) ◽  
pp. 2360-2371 ◽  
Author(s):  
M. A. Elbagerma ◽  
H. G. M. Edwards ◽  
T. Munshi ◽  
M. D. Hargreaves ◽  
Pavel Matousek ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Raman Spectroscopy ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Transmission Raman

Unprecedented transformation of [I−·I3−] to [I42−] polyiodides in the solid state: structures, phase transitions and characterization of dipyrazolium iodide triiodide

2015 ◽  
Vol 44 (42) ◽  
pp. 18447-18458 ◽  
Author(s):  
M. Węcławik ◽  
P. Szklarz ◽  
W. Medycki ◽  
R. Janicki ◽  
A. Piecha-Bisiorek ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Phase Transitions ◽  
Solid State ◽  
Dielectric Measurements ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Solid State Structures

Dipyrazolium iodide triiodide, [C3N2H5+]2[I−·I3−], has been synthesized and studied by means of X-ray diffraction, differential scanning calorimetry, dielectric measurements, and UV-Vis spectroscopy.

Sign in / Sign up

Export Citation Format

Share Document