Effects of various agents and laser systems on antibacterial activity and microtensile bond strength when used for cavity disinfection

2019 ◽  
Vol 13 (1) ◽  
pp. 12
Author(s):  
Ipek Arslan ◽  
Ozgul Baygin ◽  
Gulcin Bayram ◽  
Rukiye Akyol ◽  
Tamer Tuzuner
Keyword(s):  
Antibacterial Activity ◽  
Bond Strength ◽  
Microtensile Bond Strength ◽  
Laser Systems

Effects of Various Antioxidant Pretreatment Modalities on Adhesion to Sound and Caries-Affected Dentin: An In Vitro Study

2021 ◽  
pp. 232020682199798
Author(s):  
Beyza Unalan Degirmenci ◽  
Alperen Degirmenci ◽  
Emine Kara
Keyword(s):  
Bond Strength ◽  
In Vitro Study ◽  
Natural Antioxidants ◽  
Microtensile Bond Strength ◽  
Mandibular Molar ◽  
Electron Microscopy Analysis ◽  
Molar Teeth ◽  
Microscopy Analysis ◽  
Two Parameters

Aim: Natural antioxidants were offered as the answer of dentin adhesion issue. The aim of this study is to investigate the effects of proanthocyanidin and lycopene as pretreatment agents on the sound and caries-affected dentin surface on microtensile bond strength and microleakage. Materials and Methods: This study was designed as in vitro because of that 84 mandibular molar teeth were collected. Forty-two of the included teeth were carious teeth, while the other 42 were without caries. Sixty of them were used for microleakage and 24 for microtensile bond strength testing and scanning electron microscopy analysis. The samples were divided into six subgroups randomly according to dentin pretreatments: 5% proanthocyanidin, 5% lycopene, and no antioxidant application. After the restorative procedures, samples were attached to the microtensile tester. Samples were subjected to tensile stress in the load cell until they broke at a speed of 0.5 mm per min. Microtensile bond strength (µTBS) and microleakage test data were analyzed with two-way analysis of variance, Bonferroni correction, and Tamhane’s T2 tests. Results: Two-way variance analysis showed that dentin pretreatment applications, dentin substrate, and the interaction between these two parameters had statistically significant effects on µTBS values ( P < .001). There was no difference between dentin pretreatment applications in terms of microleakage scores ( P > .05). Conclusion: The application of dentin pretreatment with proanthocyanidin is a successful procedure that increases the bond strength in both dentin substrate, while pretreatment with lycopene in caries-affected dentin reduces it.

scholarly journals The Influence of Blade Type and Feeding Force during Resin Bonded Dentin Specimen Preparation on the Microtensile Bond Strength Test

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 450
Author(s):  
Apinya Limvisitsakul ◽  
Suppason Thitthaweerat ◽  
Pisol Senawongse
Keyword(s):  
Bond Strength ◽  
Surface Integrity ◽  
Strength Test ◽  
Specimen Preparation ◽  
Sectional Area ◽  
Microtensile Bond Strength ◽  
Cross Sectional ◽  
Microtensile Testing ◽  
Feeding Force ◽  
Scanning Electron

This paper presents the effect of blade type and feeding force during resin-bonded dentin specimen preparation on the microtensile bond strength (μTBS) test. Forty resin-bonded flat middle dentin specimens were divided into four groups. The specimens of each group were sectioned according to type of blade and feeding force as follows: fine grit/20 N, fine grit/40 N, medium grit/20 N, and medium grit/40 N to obtain resin-dentin sticks with a cross-sectional area of 1.0 mm2. Four sticks from the center of each tooth were subjected to the μTBS test. Five remaining sticks of each group were selected for surface topography observation under a scanning electron microscope (SEM). As a result, the bond strength of the medium-grit group was higher than that of the fine-grit group (p < 0.001), whereas the feeding force had no influence on bond strength values (p = 0.648). From the SEM, sticks prepared with the fine-grit blade showed a smoother surface integrity and fewer defects on the specimen edges in comparison with the sticks prepared with the medium-grit blade. The grit type of the blade is one of the considerable factors that may affect the bond strength and the surface integrity of resin-dentin specimens for microtensile testing.

The effect of self-etching adhesive system associated with different energy densities of Nd:YAG laser on microtensile bond strength to dentin

2018 ◽  
Vol 2 (3) ◽  
pp. 157-162 ◽  
Author(s):  
Daphne Camara Barcellos ◽  
Priscila Holleben ◽  
Beatriz Maria Fonseca ◽  
Bruna de Cássia Sabino ◽  
Sérgio Eduardo de Paiva Gonçalves
Keyword(s):  
Bond Strength ◽  
Nd:Yag Laser ◽  
Adhesive System ◽  
Microtensile Bond Strength

Development of a Cavity Disinfectant Containing Antibacterial Monomer MDPB

2016 ◽  
Vol 95 (13) ◽  
pp. 1487-1493 ◽  
Author(s):  
N. Hirose ◽  
R. Kitagawa ◽  
H. Kitagawa ◽  
H. Maezono ◽  
A. Mine ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Bond Strength ◽  
Bacterial Species ◽  
Oral Bacteria ◽  
Resin Cement ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Significant Difference ◽  
Adhesive Resin Cement

An experimental cavity disinfectant (ACC) that is intended to be used for various direct and indirect restorations was prepared by adding an antibacterial monomer 12-methacryloyloxydodecylpyridinum bromide (MDPB) at 5% into 80% ethanol. The antibacterial effectiveness of ACC and its influences on the bonding abilities of resin cements were investigated. To examine the antibacterial activity of unpolymerized MDPB, the minimum inhibitory and bactericidal concentrations (MIC and MBC) were determined for Streptococcus mutans, Lactobacillus casei, Actinomyces naeslundii, Parvimonas micra, Enterococcus faecalis, Fusobacterium nucleatum, and Porphyromonas gingivalis. Antibacterial activities of ACC and the commercial cavity disinfectant containing 2% chlorhexidine and ethanol (CPS) were evaluated by agar disk diffusion tests through 7 bacterial species and by MIC and MBC measurement for S. mutans. The effects of ACC and CPS to kill bacteria in dentinal tubules were compared with an S. mutans–infected dentin model. Shear bond strength tests were used to examine the influences of ACC on the dentin-bonding abilities of a self-adhesive resin cement and a dual-cure resin cement used with a primer. Unpolymerized MDPB showed strong antibacterial activity against 7 oral bacteria. ACC produced inhibition zones against all bacterial species similar to CPS. For ACC and CPS, the MIC value for S. mutans was identical, and the MBC was similar with only a 1-step dilution difference (1:2). Treatment of infected dentin with ACC resulted in significantly greater bactericidal effects than CPS ( P < 0.05, analysis of variance and Tukey’s honest significant difference test). ACC showed no negative influences on the bonding abilities to dentin for both resin cements, while CPS reduced the bond strength of the self-adhesive resin cement ( P < 0.05). This study clarified that the experimental cavity disinfectant containing 5% MDPB is more effective in vitro than the commercially available chlorhexidine solution to eradicate bacteria in dentin, without causing any adverse influences on the bonding abilities of resinous luting cements.

Microtensile bond strength of different adhesive systems in dentin irradiated with Er:YAG laser

2008 ◽  
Vol 5 (7) ◽  
pp. 547-551 ◽  
Author(s):  
L M G Sierpinsky ◽  
D M Lima ◽  
M S M Candido ◽  
V S Bagnato ◽  
S T Porto-Neto
Keyword(s):  
Bond Strength ◽  
Er:Yag Laser ◽  
Adhesive Systems ◽  
Microtensile Bond Strength

Influence of chlorhexidine in cavities prepared with ultrasonic or diamond tips on microtensile bond strength

2016 ◽  
Vol 31 (10) ◽  
pp. 1133-1141
Author(s):  
Elen Cristina Pradella Balloni ◽  
Flávia Lucisano Botelho do Amaral ◽  
Fabiana Mantovani Gomes França ◽  
Cecilia Pedroso Turssi ◽  
Roberta Tarkany Basting
Keyword(s):  
Bond Strength ◽  
Microtensile Bond Strength
Sign in / Sign up

Export Citation Format

Share Document