scholarly journals Comparative evaluation of marginal and internal fit of endocrowns using lithium disilicate and polyetheretherketone computer-aided design - computer-aided manufacturing (CAD-CAM) materials: An in vitro study

2021 ◽  
Vol 24 (2) ◽  
pp. 198
Author(s):  
ArshiIlyas Kazi ◽  
AamirZahid Godil ◽  
SanaaAkhlaq Wadwan ◽  
KashifYusuf Gandhi ◽  
RamandeepJ S. Dugal
Keyword(s):  
Computer Aided Design ◽  
Comparative Evaluation ◽  
In Vitro Study ◽  
Lithium Disilicate ◽  
Computer Aided Manufacturing ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design ◽  
Internal Fit

scholarly journals Efeito da fumaça de cigarro e escovação simulada na cêramica vítrea de dissilicato de lítio CAD/CAM

2021 ◽  
Vol 13 (4) ◽  
pp. e7296
Author(s):  
Magna Andréa Rabêlo Diógenes ◽  
Francisca Tauliane Lemos de Castro ◽  
Samara Kelly da Silva Cavalcante ◽  
Ana Carolina Matias Dinelly Pinto ◽  
Pedro Henrique Chaves Isaias ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Lithium Disilicate ◽  
Computer Aided Manufacturing ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design

Objetivo: Revisar acerca do efeito da fumaça do cigarro, associada ou não à escovação, na rugosidade superficial e na microdureza de uma cerâmica vítrea de dissilicato de lítio “Computer-Aided Design/Computer-Aided Manufacturing” (CAD/CAM). Métodos: Pesquisaram-se os descritores cadastrados no MeSH “lithium disilicate”, “smoking”, “CAD CAM”, “brushing”, “rough”, “hardness”, combinados entre si pelo operador booleano “AND”, na base de dados PubMed nos últimos 5 anos. Resultados: De acordo com a pesquisa, foram encontrados 625 artigos e selecionados 12 estudos in vitro. 5 estudos concluíram que as restaurações cerâmicas CAD/CAM apresentaram estabilidade de cor e de rugosidade da superfície, após escovação simulada e termociclagem.  4 estudos observaram que a escovação simulada e algumas bebidas aumentaram significativamente a rugosidade superficial da cerâmica de dissilicato de lítio. 3 estudos inferiram que a rugosidade superficial e a microdureza podem ser influenciadas pelos tratamentos de superfícies. Considerações finais: As cerâmicas de dissilicato de lítio CAD/CAM possuem propriedades satisfatórias em relação a sua resistência e estética, após exposição à fumaça do cigarro, associada ou não com a escovação.

Influence of Computer-aided Design/Computer-aided Manufacturing Diamond Bur Wear on Marginal Misfit of Two Lithium Disilicate Ceramic Systems

2019 ◽  
Vol 45 (4) ◽  
pp. 416-425
Author(s):  
LH Raposo ◽  
PS Borella ◽  
DC Ferraz ◽  
LM Pereira ◽  
MS Prudente ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Composite Resin ◽  
Lithium Disilicate ◽  
Computer Aided Manufacturing ◽  
Diamond Bur ◽  
Significant Difference ◽  
Computer Aided ◽  
Cad Cam ◽  
Ceramic Crowns ◽  
Aided Design

Clinical Relevance Marginal misfit of monolithic lithium disilicate ceramic crowns obtained from a chairside computer-aided design/computer-aided manufacturing system is affected after successive millings using a single diamond bur set. This fact can be critical for the longevity of indirect restorations. SUMMARY Objectives: This laboratory study aimed to assess the effect of successive crown millings on the marginal misfit of monolithic full-ceramic restorations obtained from two lithium disilicate systems, with a single diamond bur set used for each material in a chairside computer-aided design/computer-aided manufacturing (CAD/CAM) unit. Methods and Materials: Initially, 36 standardized composite resin dies were produced by additive manufacturing from a three-dimensional model of a right mandibular first molar with full-crown preparation generated in CAD software. Individual ceramic crowns were obtained in a chairside CAD/CAM unit (CEREC MC XL) for each composite resin die according to the ceramic system (IPS e.max CAD and Rosetta SM; n=18). Two new diamond burs were used as a set for obtaining the crowns in each experimental group (ceramic systems), and the milling periods were defined after three crown millings (T0-T6), when the diamond bur set of each system was removed for morphologic characterization using scanning electron microscopy (SEM). The marginal misfit of the crowns was assessed through coronal and sagittal micro-tomographic sectioning, in the vertical and horizontal directions of the ceramic crowns seated on their respective resin dies. The collected data were tabulated and subjected to one-way analysis of variance and Tukey's honestly significant difference test (α=0.05). Results: SEM images showed changes in the superficial morphology of the diamond bur sets, with progressive loss of the diamond granules after the successive millings of crowns for both experimental groups. Significant differences were detected in the marginal misfit of the crowns from both ceramic systems at the different milling periods (p<0.001). Conclusions: Diamond burs deteriorated after successive crown millings for both lithium disilicate ceramic systems. The marginal misfit of the crowns obtained increased with the successive use of the CAD/CAM diamond bur set employed for milling each ceramic material. In addition, new milling of full lithium disilicate ceramic crowns can be inappropriate after 11 successive millings for IPS e.max CAD and 12 for Rosetta SM, due to the increased marginal misfit observed under the parameters tested.

Effect of Different Computer-aided Design/Computer-aided Manufacturing (CAD/CAM) Materials and Thicknesses on the Fracture Resistance of Occlusal Veneers

2018 ◽  
Vol 43 (5) ◽  
pp. 539-548 ◽  
Author(s):  
JP Andrade ◽  
D Stona ◽  
HR Bittencourt ◽  
GA Borges ◽  
LH Burnett ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Fracture Resistance ◽  
Testing Machine ◽  
Control Group ◽  
Computer Aided Manufacturing ◽  
Universal Testing ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design

SUMMARY The aim was to evaluate, in vitro, the influence of different computer-aided design/computer-aided manufacturing (CAD/CAM) materials (IPS e.max CAD, Vita Enamic, and Lava Ultimate) and thicknesses (0.6 mm and 1.5 mm) on the fracture resistance of occlusal veneers. Sixty human third molars were prepared to simulate advanced erosion of the occlusal surface, and the teeth were randomly divided into six experimental groups (n=10) according to the material and thickness used to build the veneers. Ten sound teeth formed the control group. The veneers were adhesively luted and submitted to mechanical cyclic loading (1 million cycles at 200-N load). The fracture resistance test was performed in a universal testing machine. The failures were classified as “reparable” and “irreparable.” According to two-way analysis of variance and the Tukey test, the interaction (material × thickness) was significant (p=0.013). The highest fracture resistance was obtained for IPS e.max CAD at a 1.5-mm thickness (4995 N) and was significantly higher compared to the other experimental groups (p<0.05). The lowest fracture resistance was obtained for Vita Enamic at 0.6 mm (2973 N), although this resistance was not significantly different from those for IPS e.max CAD at 0.6 mm (3067 N), Lava Ultimate at 0.6 mm (3384 N), Vita Enamic at 1.5 mm (3540 N), and Lava Ultimate at 1.5 mm (3584 N) (p>0.05). The experimental groups did not differ significantly from the sound teeth (3991 N) (p>0.05). The failures were predominantly repairable. The occlusal veneers of IPS e.max CAD, Vita Enamic, and Lava Ultimate, with thicknesses of 0.6 mm and 1.5 mm, obtained fracture resistances similar to those associated with sound teeth.

scholarly journals Qualitative and Semi-Quantitative Assessment of Processing-Related Surface Contamination of One- and Two-Piece CAD/CAM Abutments before and after Ultrasonic Cleaning

Materials ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3225
Author(s):  
Peter Gehrke ◽  
Cyrus Abazari ◽  
Kai Schlichter ◽  
Carsten Fischer ◽  
Dirk Duddeck ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
In Vitro Study ◽  
Surface Contamination ◽  
Computer Aided Manufacturing ◽  
Inflammatory Reactions ◽  
Ultrasonic Cleaning ◽  
Computer Aided ◽  
Before And After ◽  
Cad Cam

Manufacturing processes of custom implant abutments may contaminate their surfaces with micro wear deposits and generic pollutants. Such particulate debris, if not removed, might be detrimental and provoke inflammatory reactions in peri-implant tissues. Although regulatory guidelines for adequate cleaning, disinfection, or sterilization exist, there does not appear to be a consistent application and data on the amount and extent of such contaminants is lacking. The aim of the present in vitro study was to evaluate the quality and quantity of processing-related surface contamination of computer-aided design/computer-aided manufacturing (CAD/CAM) abutments in the state of delivery and after ultrasonic cleaning. A total of 28 CAD/CAM monotype and hybrid abutments were cleaned and disinfected applying a three-stage ultrasonic protocol (Finevo protocol). Before and after cleaning, the chemical composition and the contamination of the abutments were assessed using scanning electron microscopy (SEM), dispersive X-ray spectroscopy (EDX), and computer-aided planimetric measurement (CAPM). In the delivery condition, monotype abutments showed a significantly higher amount of debris compared to hybrid abutments (4.86 ± 6.10% vs. 0.03 ± 0.03%, p < 0.001). The polishing process applied in the laboratory after bonding the hybrid abutment components reduces the surface roughness and thus contributes substantially to their purity. The extent of contamination caused by computer-aided manufacturing of custom abutments can be substantially minimized using a three-stage ultrasonic protocol.

scholarly journals Marginal Gap Evaluation of Metal Onlays and Resin Nanoceramic Computer-Aided Design and Computer-Aided Manufacturing Blocks Onlays

2019 ◽  
Vol 13 (01) ◽  
pp. 017-021
Author(s):  
Nor Faharina Abdul Hamid ◽  
Wan Zaripah Wan Bakar ◽  
Zaihan Ariffin
Keyword(s):  
Statistical Analysis ◽  
Computer Aided Design ◽  
Marginal Gap ◽  
Computer Aided Manufacturing ◽  
Promising Alternative ◽  
Significant Difference ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design

Abstract Objective This study was carried out to assess and compare the marginal gap of conventionally used metal onlays and new resin nanoceramic (RNC) (Lava Ultimate block) onlays. Materials and Methods This is an in vitro study using two extracted sound human mandibular molars. One tooth was prepared to receive the metal onlays and another one for the RNC onlays which were fabricated using the computer-aided design and computer-aided manufacturing (CAD/CAM) technology. Twelve metals and 12 ceramic onlays were fabricated before they were placed at their respective preparation and examined under the Leica stereomicroscope, M125C (Leica Microsystems, Wetzlar, Germany) for a marginal analysis. The gap width was measured at 10 predefined landmarks which included 3 points on the buccal and lingual surfaces each and 2 points each on the mesial and distal surfaces, respectively. Statistical Analysis Mann–Whitney post hoc test was used for statistical analysis (P ≤ 0.05). Results Overall, the RNC onlays showed significant lower marginal gap with the exception of the landmarks 5 and 6 (on distolingual) and no significant difference at landmark 7 (on midlingual). It was observed that the marginal gap were all within the clinically acceptable limit of 120 μm. Conclusions Based on the results obtained, it can be concluded that the RNC CAD/CAM onlays are a promising alternative to the metal onlays.

Sign in / Sign up

Export Citation Format

Share Document