The use of seismological techniques to determine the physical properties of rock bodies: experimental results and recommendations for future work within the 'RADWASTE' program

1979 ◽  
Author(s):  
C Wright
Keyword(s):  
Physical Properties ◽  
Experimental Results ◽  
Future Work

Relation between Molecular Weights and Physical Properties of Rubber Fractions

1941 ◽  
Vol 14 (3) ◽  
pp. 580-589 ◽  
Author(s):  
G. Gee ◽  
L. R. G. Treloar
Keyword(s):  
Molecular Weight ◽  
Natural Rubber ◽  
Physical Properties ◽  
High Molecular Weight ◽  
Elastic Properties ◽  
Elastic Material ◽  
Experimental Results ◽  
Molecular Weights ◽  
High Elasticity ◽  
Latex Rubber

Abstract As high elasticity is a property possessed only by substances of high molecular weight, it is of interest to enquire into the relation between the elastic properties of a highly elastic material such as rubber and its molecular weight. An investigation on these lines has been made possible through the work of Bloomfield and Farmer, who have succeeded in separating natural rubber into fractions having different average molecular weights. The more important physical properties of these fractions have been examined with the object of determining which of the properties are dependent on molecular weight and which are not. Fairly extensive observations were made on the fractions from latex rubber referred to as Nos. 2, 3 and 4 by Bloomfield and Farmer, and some less extensive observations were carried out on the less oxygenated portion of fraction No. 1 obtained from crepe rubber (called hereafter 1b) . Before considering these experimental results, and their relation to the molecular weights of the fractions, it will be necessary to refer briefly to the methods used for the molecular-weight determinations, and to discuss the significance of the figures obtained.

scholarly journals Mathematical Models for Predicting the Biodiesel Properties

2020 ◽  
Vol 9 (5) ◽  
pp. 2362-2376
Keyword(s):  
Fatty Acid ◽  
Physical Properties ◽  
Good Accuracy ◽  
Regression Coefficient ◽  
Cetane Number ◽  
High Accuracy ◽  
Good Relationship ◽  
Combine Fatty Acid ◽  
The One ◽  
Future Work

Density, viscosity and cetane number are important physical properties of biodiesel as they participate in one way or another in the fuel metering, calibration and nozzle process during combustion. High and good accuracy of the physical properties of biodiesel will therefore lead to improved combustion and therefore better efficiency. The aim of this study is therefore to seek good and high precision by combining properties and comparing the analysis between ANN and RSM. Studies have been made by researchers to collect data. In this study the combination of properties is exploited. A total of 1360 data from the various studies has been collected and exploited. From this data after elimination and treatment 39 possible combinations were analyzed and compared by ANN and RSM. The result of simulation is: The best combinations: 𝝆 = 𝒇(𝑭𝒂) , 𝝂 = 𝒇(𝑭𝒂) , 𝒄𝒏 = 𝒇(𝑭𝒂) with 𝑹 𝟐 respectively equal to (0.9998, 0.9998 , 0.9987) and R equal to ( 0.9997,0.99971,0.9984) obtained with ANN simulation provide more accuracy than 𝑹 𝟐 ( 0.912 , 0.799 , 0.766 ) and R ( 0.837, 0.739 , 0.920) obtained with RSM simulation in general 𝑹 𝟐 obtained with ANN (0.9998, 0.9998 , 0.9987) provide good accuracy than 𝑹 𝟐 (0.9112,0.799,0.766) obtained with RSM . Also there is a good relationship between fatty acid and others properties since they provide good result. In general the overall regression coefficient R and the correlation coefficient 𝑹 𝟐 values of the combinations obtained in the simulation with the ANN provide better and good accuracy since their values are close to each other and all close to 1, and their mse tend towards 0. While the one obtained with RSM are distant from each other and distant of 0 so they provide an acceptable accuracy.it is also important to note that high accuracy of properties using RSM must have at least combination of three parameters. Also after every combination, the conclusion says there is a good relationship between fatty acid and other properties. Then for the future work, it will be benefit to combine fatty acid with others properties and evaluate result, also use another network to simulate.

A Comprehensive Understanding on Sewability of Natural Biomaterial: An Insight on Process Optimization during Leather Manufacture

2021 ◽  
Vol 116 (7) ◽  
Author(s):  
Gladstone Christopher Jayakumar ◽  
K Phebe Aaron ◽  
K Krishnaraj
Keyword(s):  
Physical Properties ◽  
Process Optimization ◽  
Three Dimensional ◽  
Experimental Results ◽  
Comprehensive Understanding ◽  
Microscopic Images ◽  
Dimensional Matrix ◽  
Natural Biomaterial ◽  
Leather Manufacture

Leather is three-dimensional matrix possessing unique properties which makes it more comfortable for daily use. Garments made from leathers are preferred choice owing to their multifaceted properties as compared to textiles in the colder regions. In the present study, an attempt has been made to evaluate the influence of phenolic syntan and synthetic fatliquor on the sewability and physical properties of post tanned leathers. From the experimental results, it is observed that the concentration of phenolic syntan and fatliquor influences leather sewability. Optical microscopic images of leathers also show that they are more compact and tighter with higher percentage of syntan. The study provides an insight in understanding the optimum usage of post tanning chemicals for better sewing properties without affecting the leather matrix adversely.

scholarly journals ESTUDO COMPARATIVO ENTRE O FIO DE NAILON E A LINHA DE PESCA (POLIAMIDA) E A SUA APLICABILIDADE COMO FIO CIRÚRGICO

1999 ◽  
Vol 4 (1) ◽  
Author(s):  
SHEILA CANEVESE RAHAL ◽  
MANOEL ÁLVARO GUIMARÃES ◽  
JOSÉ VICENTE FORTES ◽  
HÉLIO LANGONI ◽  
PEDRO HELIO LUCCHIARI
Keyword(s):  
Adverse Effect ◽  
Comparative Study ◽  
Physical Properties ◽  
Group Iv ◽  
Experimental Results ◽  
Control Group ◽  
Group Iii ◽  
Nylon Thread ◽  
Group I ◽  
Mucous Membranes

"Linhas de pesca"* em diâmetros de 0,15mm; 0,20mm; 0,25mm; 0,30mm foram divididas em quatro grupos, contendo dez amostras de cada diâmetro: grupo I - controle; grupo II - linhas colocadas em frasco com pastilhas de formalina; grupo III - um ciclo de autoclavagem (30 minutos à 121 C, seguido por 10 minutos de secagem à 37 C em estufa); grupo IV - dois ciclos de autoclavagens. Foram avaliadas quanto: comprimento, calibre, resistência no nó e alongamento. Comparativamente foram examinados fios de náilon cirúrgico nas numerações 0, 1-0, 2-0, 3-0, 4-0 e 5-0 (10 amostras de cada um). Pelos resultados da análise estastística, verificou-se que a esterilização pelo calor úmido exerceu um efeito adverso na resistência da "linha de pesca". Por outro lado não houve diferenças na resistência, calibre e alongamento da "linha de pesca" entre o primeiro e segundo ciclo de autoclavagem. As “linhas” mantidas em pastilhas de formalina mantiveram na sua maioria suas características originais de resistência, comprimento, diâmetro e alongamento quando comparada ao grupo controle, entretanto, cabe lembrar que o formaldeído é considerado irritante para pele e membrana mucosa. Foi possível concluir que a "linha de pesca" apresenta características semelhantes ao fio cirúrgico, podendo ser mantida em pastilhas de formalina ou esterilizada em autoclave, lembrando que a autoclavagem altera algumas de suas propriedades físicas. Abstract A comparative study has been carried out between fishing lines and nylon thread in regard to their applicability as surgical thread. Four groups of 10 fishing lines in each of the following diameters = 0.15, 0.20, 0.25 and 0.30 mm = were subjected to the following treatments: group I, control; group II sterilized with formalin tablets; group III, autoclaved 30 minutes at 121oC; group IV, autoclaved twice 30 minutes at 121oC. The following parameters were then considered: length, caliber, resistance at the knot, and elongation. Ten samples of each surgical 0, 1.0, 2.0, 3.0, 4.0 and 5.0 nylon threads were used in comparatively similar experiments as the ones carried out with the fishing lines. According to the statistical analyses of the experimental results, it has been found that the sterilization by means of the humid heat exerts an adverse effect on the resistance of the fishing line. However, no differences were found between the effect displayed by two cycles sterilization compared with the fishing lines subjected to only one cycle. The threads maintained in formalin kept the majority of their original properties of resistance, length, diameter and elongation when compared with the control group. It is known, however that formaldehyde is an irritant chemical towards the skin and the mucous membranes. It was possible to conclude: a. fishing lines display characteristics similar to that ones of the nylon surgical thread; b. they can be maintained in formalin solution; c. autoclave sterilization alters some of their physical properties.

Advanced Thermoelectric Materials and Systems for Automotive Applications in the Next Millennium

1997 ◽  
Vol 478 ◽  
Author(s):  
Donald T. Morelli
Keyword(s):  
Environmental Economic ◽  
Physical Properties ◽  
Thermoelectric Properties ◽  
Thermoelectric Materials ◽  
Experimental Results ◽  
Automotive Applications ◽  
New Materials ◽  
Thermoelectric Devices ◽  
Filled Skutterudites ◽  
Fundamental Physical

AbstractA combination of environmental, economic, and technological drivers has led to a reassessment of the potential for using thermoelectric devices in several automotive applications. In order for this technology to achieve its ultimate potential, new materials with enhanced thermoelectric properties are required. Experimental results on the fundamental physical properties of some new thermoelectric materials, including filled skutterudites and 1–1–1 intermetallic semiconductors, are presented.

Effect of the Surfactant Concentration on Sinking Electric Discharge Machining Performance with Water-in-Oil Emulsion as Dielectric

2011 ◽  
Vol 189-193 ◽  
pp. 3153-3157
Author(s):  
Yan Zhen Zhang ◽  
Yong Hong Liu ◽  
Ren Jie Ji ◽  
Bao Ping Cai
Keyword(s):  
Physical Properties ◽  
Electric Discharge ◽  
Surfactant Concentration ◽  
Emulsion Stability ◽  
Experimental Results ◽  
Machining Performance ◽  
Electric Discharge Machining ◽  
Oil Emulsion ◽  
The Stability ◽  
Water In Oil Emulsion

In this paper, the EDM performance of water-in-oil (W/O) emulsions dielectric with different surfactant concentration is investigated by correlated to its physical properties, such as viscosity and droplets size, which is predominantly determined by the surfactant concentration. Experimental results show that the stability of the W/O emulsions increases with increasing surfactant concentration, whereas the EDM performance deteriorates with increasing surfactant concentration. So, taking a comprehensively consideration of the emulsion stability and EDM performance, the concentration of surfactant must be appropriately selected.

First-Principles Calculations of Elastic Properties of HoBi and ErBi

2013 ◽  
Vol 664 ◽  
pp. 672-676
Author(s):  
De Ming Han ◽  
Gang Zhang ◽  
Li Hui Zhao
Keyword(s):  
Shear Modulus ◽  
Physical Properties ◽  
Bulk Modulus ◽  
Elastic Properties ◽  
Lattice Constant ◽  
Elastic Constants ◽  
First Principles ◽  
Energy Band ◽  
First Principles Calculations ◽  
Future Work

We present first-principles investigations on the elastic properties of XBi (X=Ho, Er) compounds. Basic physical properties, such as lattice constant, elastic constants (Cij), isotropic shear modulus (G), bulk modulus (B), Young’s modulus (Y), Poisson’s ratio (υ), and Anisotropy factor (A) are calculated. The calculated energy band structures show that the two compounds possess semi-metallic character. We hope that these results would be useful for future work on two compounds.

A Comparative, Experimental Study of Model Suitability to Describe Vehicle Rollover Dynamics for Control Design

2005 ◽  
Author(s):  
John T. Cameron ◽  
Sean Brennan
Keyword(s):  
Experimental Validation ◽  
Controller Design ◽  
Experimental Testing ◽  
Control Strategies ◽  
Control Design ◽  
Experimental Results ◽  
Dynamics And Control ◽  
Vehicle Rollover ◽  
And Control ◽  
Future Work

This work presents results of an initial investigation into models and control strategies suitable to prevent vehicle rollover due to untripped driving maneuvers. Outside of industry, the study of vehicle rollover inclusive of both experimental validation and practical controller design is limited. The researcher interested in initiating study on rollover dynamics and control is left with the challenging task of identifying suitable vehicle models from the literature, comparing these models with experimental results, and determining suitable parameters for the models. This work addresses these issues via experimental testing of published models. Parameter estimation data based on model fits is presented, with commentary given on the validity of different methods. Experimental results are then presented and compared to the output predicted by the various models in both the time and frequency domain in order to provide a foundation for future work.

scholarly journals A Basic Study on Establishing the Automatic Sewing Process According to Textile Properties

Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1206
Author(s):  
Suhyun Lee ◽  
Soohyeon Rho ◽  
Daeyoung Lim ◽  
Wonyoung Jeong
Keyword(s):  
Surface Roughness ◽  
Physical Properties ◽  
Regression Equation ◽  
Experimental Results ◽  
The Other ◽  
Feeding System ◽  
Basic Study ◽  
Sewing Machine ◽  
Stitch Length ◽  
Smart Factories

This study aimed to establish an automatic sewing process for garment production according to textile properties. An automatic feeding system and a self-made template were introduced to an industrial sewing machine. Two types of stitches were performed on fabrics with various physical properties and surface roughness using this automatic sewing machine. The appearance, stitch length and width, seam strength, and seam efficiency were evaluated according to the sewing conditions, such as presser height and sewing speed. In addition, the correlation between textile properties, sewing conditions, and sewability was analyzed to derive a regression equation for sewability. The evaluation showed no difference in the lock stitch condition. On the other hand, under the zigzag stitch condition, the stitch width differed according to the presser height, which also affected the seam structure. The optimal presser height for each fabric was derived from the experimental results. In terms of the sewing speed, however, the seam strength was the best at 200 RPM in the lock stitch and 400 RPM in the zigzag stitch. The moderating effect of the presser height between textile properties and sewability in the lock stitch condition was confirmed. This result can be used as basic data for establishing an automatic sewing process for smart factories.

scholarly journals Towards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks

2020 ◽  
Author(s):  
Helen A. Little ◽  
Nagendra G. Tanikella ◽  
Matthew Reich ◽  
Matthew J. Fiedler ◽  
Samantha L. Snabes ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Physical Properties ◽  
Circular Economy ◽  
Thermal Characterization ◽  
Feeding Tubes ◽  
Recycled Polyethylene ◽  
History Of ◽  
Future Work ◽  
The Impact ◽  
Shape And Size

This study explores the potential to reach a circular economy for post-consumer recycled polyethylene terephthalate (rPET) packaging and bottles by using it as a distributed recycling for additive manufacturing (DRAM) feedstock. Specifically, rPET is processed using only an open source toolchain with fused particle fabrication (FPF) or fused granular fabrication (FGF) processing. In this study, first the impact of granulation, sifting and heating (and their combination) is quantified on the shape and size distribution of the rPET flakes. Then feeding studies were performed to see if they could be printed through an external feeder or needed to be direct printed with a hopper using two Gigabot X machines, one with extended part cooling and one without. Print settings were optimized based on thermal characterization and for the latter which was shown to print rPET directly from shredded water bottles mechanical testing is performed. The results showed that geometry was important for extended feeding tubes and direct printed using a hopper. Further there is a wide disparity in the physical properties of rPET from water bottles depending on source and the history of the material. Future work is needed to enable water bottles to be used as a widespread DRAM feedstock.

Sign in / Sign up

Export Citation Format

Share Document