scholarly journals Full waveform sonic logging for shear wave velocity

2012 ◽  
Author(s):  
H Crow
Geophysics ◽  
1989 ◽  
Vol 54 (5) ◽  
pp. 590-597 ◽  
Author(s):  
S. T. Chen

This paper provides laboratory verification of a novel technique for direct, on‐line, shear (S)-wave velocity logging in hard and soft formations using a quadrupole source as recently suggested by theory. Conventional monopole logging tools are not capable of directly measuring the shear‐wave velocity in soft formations. Previous theoretical and laboratory experimental work has already shown that a dipole source can be used for direct shear‐wave velocity logging in hard and soft formations. I demonstrate in this paper that quadrupole sources can also achieve this objective. Furthermore, the quadrupole source can produce higher resolution of S-wave velocity, since it can be operated at higher frequencies. A power comparison of monopole, dipole, and quadrupole indicates that a field quadrupole logging tool may be expected to produce strong enough signals for practical operation. The present studies were conducted on laboratory scale models representative of sonic logging conditions in the field. I used a limestone model to represent hard formations and a plastic model to simulate a soft formation such as Gulf Coast soft shale or near‐surface materials.


2020 ◽  
Vol 173 ◽  
pp. 103947
Author(s):  
Yingwei Yan ◽  
Zhejiang Wang ◽  
Jing Li ◽  
Nan Huai ◽  
Yuntao Liang ◽  
...  

Solid Earth ◽  
2019 ◽  
Vol 10 (2) ◽  
pp. 379-390 ◽  
Author(s):  
Yaniv Darvasi ◽  
Amotz Agnon

Abstract. Instrumental strong motion data are not common around the Dead Sea region. Therefore, calibrating a new attenuation equation is a considerable challenge. However, the Holy Land has a remarkable historical archive, attesting to numerous regional and local earthquakes. Combining the historical record with new seismic measurements will improve the regional equation. On 11 July 1927, a rupture, in the crust in proximity to the northern Dead Sea, generated a moderate 6.2 ML earthquake. Up to 500 people were killed, and extensive destruction was recorded, even as far as 150 km from the focus. We consider local near-surface properties, in particular, the shear-wave velocity, as an amplification factor. Where the shear-wave velocity is low, the seismic intensity far from the focus would likely be greater than expected from a standard attenuation curve. In this work, we used the multichannel analysis of surface waves (MASW) method to estimate seismic wave velocity at anomalous sites in Israel in order to calibrate a new attenuation equation for the Dead Sea region. Our new attenuation equation contains a term which quantifies only lithological effects, while factors such as building quality, foundation depth, topography, earthquake directivity, type of fault, etc. remain out of our scope. Nonetheless, about 60 % of the measured anomalous sites fit expectations; therefore, this new ground-motion prediction equation (GMPE) is statistically better than the old ones. From our local point of view, this is the first time that integration of the 1927 historical data and modern shear-wave velocity profile measurements improved the attenuation equation (sometimes referred to as the attenuation relation) for the Dead Sea region. In the wider context, regions of low-to-moderate seismicity should use macroseismic earthquake data, together with modern measurements, in order to better estimate the peak ground acceleration or the seismic intensities to be caused by future earthquakes. This integration will conceivably lead to a better mitigation of damage from future earthquakes and should improve maps of seismic hazard.


Sign in / Sign up

Export Citation Format

Share Document