Automated Reservoir Management Workflows to Identify Candidates and Rank Opportunities for Production Enhancement and Cost Optimization in a Giant Field in Offshore Abu Dhabi

2021 ◽  
Author(s):  
Carlos Mata ◽  
Luigi Saputelli ◽  
Dorzhi Badmaev ◽  
Wenyang Zhao ◽  
Richard Mohan ◽  
...  
Keyword(s):  
Machine Learning ◽  
Net Present Value ◽  
Cost Optimization ◽  
Production Performance ◽  
Added Value ◽  
Machine Learning Techniques ◽  
Abu Dhabi ◽  
Time Duration ◽  
Data Set ◽  
Infill Drilling

Abstract As the field matures and overall field production decline, an accelerated and advanced selection of existing wells for workovers and sidetracks would be critical to meet with the increasing demand for production. Traditionally, an intensive effort is required to identify the right candidates and to ensure the technical and economic success of well interventions, infill-drilling locations and sidetrack locations. An advanced workflow is developed to automate the repetitive and less added value tasks such as data gathering and validation. The data set included historical production performance, static and dynamic reservoir and fluid properties, events and issues encountered within the evaluated wells and regions. The proposed solution allowed an integrated assessment of production enhancement opportunities through various consistent analytic computations, as well as machine learning techniques including Bayesian networks and time-series forecasting models. The automated process generates a comprehensive list of future well interventions including sidetrack candidates, infill-drilling locations and behind casing opportunities with an advanced scoring system and several technical (production performance and reserves) and financial KPIs (i.e. net present value and unit technical cost). Several dashboards built and adjusted with the involvement of various company departments. Lastly, highly ranked opportunities are incorporated into the business plan in accordance to field development targets as well as the availability technical resources (rigs, materials, well availability). The developed solution was tested and validated in a giant mature carbonate field with over 700 well strings in Offshore Abu Dhabi. The solution identified 20 times more feasible opportunities than the typical multidisciplinary team review in 75% less time duration. The automated workflows considered re-evaluating and selecting prime candidates with a reduced risk of failure, therefore improving the technical and economic value by 34%. The workflows are scheduled on daily basis giving a time-dependent assessment and expert monitoring system, which can also notify the operator when problems encountered. Instead of computationally heavy traditional numerical simulation models, the assessment of a large number of well count can be done within hours instead of months. The combination of physics and machine learning based models lead to the development of automated workflows to rank and determine the best candidates via a successful cost optimization and production enhancement.

Comparative Analysis of Machine Learning Techniques Using Predictive Modeling

2020 ◽  
Vol 13 ◽  
Author(s):  
Ritu Khandelwal ◽  
Hemlata Goyal ◽  
Rajveer Singh Shekhawat
Keyword(s):  
Machine Learning ◽  
Comparative Analysis ◽  
Data Science ◽  
Training Data ◽  
Machine Learning Techniques ◽  
Future Trends ◽  
Data Set ◽  
Learning Stage ◽  
Learning Techniques ◽  
Different Types

Introduction: Machine learning is an intelligent technology that works as a bridge between businesses and data science. With the involvement of data science, the business goal focuses on findings to get valuable insights on available data. The large part of Indian Cinema is Bollywood which is a multi-million dollar industry. This paper attempts to predict whether the upcoming Bollywood Movie would be Blockbuster, Superhit, Hit, Average or Flop. For this Machine Learning techniques (classification and prediction) will be applied. To make classifier or prediction model first step is the learning stage in which we need to give the training data set to train the model by applying some technique or algorithm and after that different rules are generated which helps to make a model and predict future trends in different types of organizations. Methods: All the techniques related to classification and Prediction such as Support Vector Machine(SVM), Random Forest, Decision Tree, Naïve Bayes, Logistic Regression, Adaboost, and KNN will be applied and try to find out efficient and effective results. All these functionalities can be applied with GUI Based workflows available with various categories such as data, Visualize, Model, and Evaluate. Result: To make classifier or prediction model first step is learning stage in which we need to give the training data set to train the model by applying some technique or algorithm and after that different rules are generated which helps to make a model and predict future trends in different types of organizations Conclusion: This paper focuses on Comparative Analysis that would be performed based on different parameters such as Accuracy, Confusion Matrix to identify the best possible model for predicting the movie Success. By using Advertisement Propaganda, they can plan for the best time to release the movie according to the predicted success rate to gain higher benefits. Discussion: Data Mining is the process of discovering different patterns from large data sets and from that various relationships are also discovered to solve various problems that come in business and helps to predict the forthcoming trends. This Prediction can help Production Houses for Advertisement Propaganda and also they can plan their costs and by assuring these factors they can make the movie more profitable.

scholarly journals Leveraging Road Characteristics and Contributor Behaviour for Assessing Road Type Quality in OSM

2021 ◽  
Vol 10 (7) ◽  
pp. 436
Author(s):  
Amerah Alghanim ◽  
Musfira Jilani ◽  
Michela Bertolotto ◽  
Gavin McArdle
Keyword(s):  
Machine Learning ◽  
Spatial Data ◽  
Classification Accuracy ◽  
Supervised Machine Learning ◽  
Machine Learning Techniques ◽  
Data Set ◽  
Semantic Inference ◽  
Road Type ◽  
The Impact

Volunteered Geographic Information (VGI) is often collected by non-expert users. This raises concerns about the quality and veracity of such data. There has been much effort to understand and quantify the quality of VGI. Extrinsic measures which compare VGI to authoritative data sources such as National Mapping Agencies are common but the cost and slow update frequency of such data hinder the task. On the other hand, intrinsic measures which compare the data to heuristics or models built from the VGI data are becoming increasingly popular. Supervised machine learning techniques are particularly suitable for intrinsic measures of quality where they can infer and predict the properties of spatial data. In this article we are interested in assessing the quality of semantic information, such as the road type, associated with data in OpenStreetMap (OSM). We have developed a machine learning approach which utilises new intrinsic input features collected from the VGI dataset. Specifically, using our proposed novel approach we obtained an average classification accuracy of 84.12%. This result outperforms existing techniques on the same semantic inference task. The trustworthiness of the data used for developing and training machine learning models is important. To address this issue we have also developed a new measure for this using direct and indirect characteristics of OSM data such as its edit history along with an assessment of the users who contributed the data. An evaluation of the impact of data determined to be trustworthy within the machine learning model shows that the trusted data collected with the new approach improves the prediction accuracy of our machine learning technique. Specifically, our results demonstrate that the classification accuracy of our developed model is 87.75% when applied to a trusted dataset and 57.98% when applied to an untrusted dataset. Consequently, such results can be used to assess the quality of OSM and suggest improvements to the data set.

Borderline and Depression: A Thin EEG Line

2021 ◽  
pp. 155005942110608
Author(s):  
Jakša Vukojević ◽  
Damir Mulc ◽  
Ivana Kinder ◽  
Eda Jovičić ◽  
Krešimir Friganović ◽  
...  
Keyword(s):  
Machine Learning ◽  
Borderline Personality ◽  
Machine Learning Techniques ◽  
Major Depressive ◽  
Everyday Clinical Practice ◽  
Data Set ◽  
Learning Techniques ◽  
Eeg Recordings ◽  
The Given ◽  
Close Interrelationship

In everyday clinical practice, there is an ongoing debate about the nature of major depressive disorder (MDD) in patients with borderline personality disorder (BPD). The underlying research does not give us a clear distinction between those 2 entities, although depression is among the most frequent comorbid diagnosis in borderline personality patients. The notion that depression can be a distinct disorder but also a symptom in other psychopathologies led our team to try and delineate those 2 entities using 146 EEG recordings and machine learning. The utilized algorithms, developed solely for this purpose, could not differentiate those 2 entities, meaning that patients suffering from MDD did not have significantly different EEG in terms of patients diagnosed with MDD and BPD respecting the given data and methods used. By increasing the data set and the spatiotemporal specificity, one could have a more sensitive diagnostic approach when using EEG recordings. To our knowledge, this is the first study that used EEG recordings and advanced machine learning techniques and further confirmed the close interrelationship between those 2 entities.

Different firm responses to the COVID-19 pandemic shocks: machine-learning evidence on the Vietnamese labor market

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Lam Hoang Viet Le ◽  
Toan Luu Duc Huynh ◽  
Bryan S. Weber ◽  
Bao Khac Quoc Nguyen
Keyword(s):  
Machine Learning ◽  
Labor Market ◽  
Large Scale ◽  
Government Support ◽  
Policy Implications ◽  
Machine Learning Techniques ◽  
Firm Characteristics ◽  
Data Set ◽  
Content Type ◽  
Firm Responses

PurposeThis paper aims to identify the disproportionate impacts of the COVID-19 pandemic on labor markets.Design/methodology/approachThe authors conduct a large-scale survey on 16,000 firms from 82 industries in Ho Chi Minh City, Vietnam, and analyze the data set by using different machine-learning methods.FindingsFirst, job loss and reduction in state-owned enterprises have been significantly larger than in other types of organizations. Second, employees of foreign direct investment enterprises suffer a significantly lower labor income than those of other groups. Third, the adverse effects of the COVID-19 pandemic on the labor market are heterogeneous across industries and geographies. Finally, firms with high revenue in 2019 are more likely to adopt preventive measures, including the reduction of labor forces. The authors also find a significant correlation between firms' revenue and labor reduction as traditional econometrics and machine-learning techniques suggest.Originality/valueThis study has two main policy implications. First, although government support through taxes has been provided, the authors highlight evidence that there may be some additional benefit from targeting firms that have characteristics associated with layoffs or other negative labor responses. Second, the authors provide information that shows which firm characteristics are associated with particular labor market responses such as layoffs, which may help target stimulus packages. Although the COVID-19 pandemic affects most industries and occupations, heterogeneous firm responses suggest that there could be several varieties of targeted policies-targeting firms that are likely to reduce labor forces or firms likely to face reduced revenue. In this paper, the authors outline several industries and firm characteristics which appear to more directly be reducing employee counts or having negative labor responses which may lead to more cost–effect stimulus.

Synthetic Sonic Log Generation With Machine Learning: A Contest Summary From Five Methods

2021 ◽  
Vol 62 (4) ◽  
pp. 393-406
Author(s):  
Yanxiang Yu ◽  
◽  
Chicheng Xu ◽  
Siddharth Misra ◽  
Weichang Li ◽  
...  
Keyword(s):  
Machine Learning ◽  
Test Data ◽  
Short Term Memory ◽  
Rock Physics ◽  
Training Data ◽  
Machine Learning Techniques ◽  
Blind Test ◽  
Data Set ◽  
Benchmark Model ◽  
Sonic Log

Compressional and shear sonic traveltime logs (DTC and DTS, respectively) are crucial for subsurface characterization and seismic-well tie. However, these two logs are often missing or incomplete in many oil and gas wells. Therefore, many petrophysical and geophysical workflows include sonic log synthetization or pseudo-log generation based on multivariate regression or rock physics relations. Started on March 1, 2020, and concluded on May 7, 2020, the SPWLA PDDA SIG hosted a contest aiming to predict the DTC and DTS logs from seven “easy-to-acquire” conventional logs using machine-learning methods (GitHub, 2020). In the contest, a total number of 20,525 data points with half-foot resolution from three wells was collected to train regression models using machine-learning techniques. Each data point had seven features, consisting of the conventional “easy-to-acquire” logs: caliper, neutron porosity, gamma ray (GR), deep resistivity, medium resistivity, photoelectric factor, and bulk density, respectively, as well as two sonic logs (DTC and DTS) as the target. The separate data set of 11,089 samples from a fourth well was then used as the blind test data set. The prediction performance of the model was evaluated using root mean square error (RMSE) as the metric, shown in the equation below: RMSE=sqrt(1/2*1/m* [∑_(i=1)^m▒〖(〖DTC〗_pred^i-〖DTC〗_true^i)〗^2 + 〖(〖DTS〗_pred^i-〖DTS〗_true^i)〗^2 ] In the benchmark model, (Yu et al., 2020), we used a Random Forest regressor and conducted minimal preprocessing to the training data set; an RMSE score of 17.93 was achieved on the test data set. The top five models from the contest, on average, beat the performance of our benchmark model by 27% in the RMSE score. In the paper, we will review these five solutions, including preprocess techniques and different machine-learning models, including neural network, long short-term memory (LSTM), and ensemble trees. We found that data cleaning and clustering were critical for improving the performance in all models.

A sentiment analysis system for social media using machine learning techniques: Social enablement

2018 ◽  
Vol 34 (3) ◽  
pp. 569-581 ◽  
Author(s):  
Sujata Rani ◽  
Parteek Kumar
Keyword(s):  
Machine Learning ◽  
Social Media ◽  
Sentiment Analysis ◽  
Media Analysis ◽  
Training Data ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Analysis Tool ◽  
Data Set ◽  
Learning Techniques

Abstract In this article, an innovative approach to perform the sentiment analysis (SA) has been presented. The proposed system handles the issues of Romanized or abbreviated text and spelling variations in the text to perform the sentiment analysis. The training data set of 3,000 movie reviews and tweets has been manually labeled by native speakers of Hindi in three classes, i.e. positive, negative, and neutral. The system uses WEKA (Waikato Environment for Knowledge Analysis) tool to convert these string data into numerical matrices and applies three machine learning techniques, i.e. Naive Bayes (NB), J48, and support vector machine (SVM). The proposed system has been tested on 100 movie reviews and tweets, and it has been observed that SVM has performed best in comparison to other classifiers, and it has an accuracy of 68% for movie reviews and 82% in case of tweets. The results of the proposed system are very promising and can be used in emerging applications like SA of product reviews and social media analysis. Additionally, the proposed system can be used in other cultural/social benefits like predicting/fighting human riots.

scholarly journals Exploiting node metadata to predict interactions in large networks using graph embedding and neural networks

2021 ◽  
Author(s):  
Rogini Runghen ◽  
Daniel B Stouffer ◽  
Giulio Valentino Dalla Riva
Keyword(s):  
Machine Learning ◽  
Neural Networks ◽  
Link Prediction ◽  
Graph Embedding ◽  
Feature Space ◽  
Machine Learning Techniques ◽  
Large Networks ◽  
Data Set ◽  
Learning Techniques ◽  
Low Dimensional

Collecting network interaction data is difficult. Non-exhaustive sampling and complex hidden processes often result in an incomplete data set. Thus, identifying potentially present but unobserved interactions is crucial both in understanding the structure of large scale data, and in predicting how previously unseen elements will interact. Recent studies in network analysis have shown that accounting for metadata (such as node attributes) can improve both our understanding of how nodes interact with one another, and the accuracy of link prediction. However, the dimension of the object we need to learn to predict interactions in a network grows quickly with the number of nodes. Therefore, it becomes computationally and conceptually challenging for large networks. Here, we present a new predictive procedure combining a graph embedding method with machine learning techniques to predict interactions on the base of nodes' metadata. Graph embedding methods project the nodes of a network onto a---low dimensional---latent feature space. The position of the nodes in the latent feature space can then be used to predict interactions between nodes. Learning a mapping of the nodes' metadata to their position in a latent feature space corresponds to a classic---and low dimensional---machine learning problem. In our current study we used the Random Dot Product Graph model to estimate the embedding of an observed network, and we tested different neural networks architectures to predict the position of nodes in the latent feature space. Flexible machine learning techniques to map the nodes onto their latent positions allow to account for multivariate and possibly complex nodes' metadata. To illustrate the utility of the proposed procedure, we apply it to a large dataset of tourist visits to destinations across New Zealand. We found that our procedure accurately predicts interactions for both existing nodes and nodes newly added to the network, while being computationally feasible even for very large networks. Overall, our study highlights that by exploiting the properties of a well understood statistical model for complex networks and combining it with standard machine learning techniques, we can simplify the link prediction problem when incorporating multivariate node metadata. Our procedure can be immediately applied to different types of networks, and to a wide variety of data from different systems. As such, both from a network science and data science perspective, our work offers a flexible and generalisable procedure for link prediction.

scholarly journals TermPicks: A century of Greenland glacier terminus data for use in machine learning applications

2021 ◽  
Author(s):  
Sophie Goliber ◽  
Taryn Black ◽  
Ginny Catania ◽  
James M. Lea ◽  
Helene Olsen ◽  
...  
Keyword(s):  
Machine Learning ◽  
Greenland Ice Sheet ◽  
Median Number ◽  
Google Earth ◽  
Training Data ◽  
Machine Learning Techniques ◽  
Data Set ◽  
Outlet Glacier ◽  
Glacier Terminus ◽  
Median Error

Abstract. Marine-terminating outlet glacier terminus traces, mapped from satellite and aerial imagery, have been used extensively in understanding how outlet glaciers adjust to climate change variability over a range of time scales. Numerous studies have digitized termini manually, but this process is labor-intensive, and no consistent approach exists. A lack of coordination leads to duplication of efforts, particularly for Greenland, which is a major scientific research focus. At the same time, machine learning techniques are rapidly making progress in their ability to automate accurate extraction of glacier termini, with promising developments across a number of optical and SAR satellite sensors. These techniques rely on high quality, manually digitized terminus traces to be used as training data for robust automatic traces. Here we present a database of manually digitized terminus traces for machine learning and scientific applications. These data have been collected, cleaned, assigned with appropriate metadata including image scenes, and compiled so they can be easily accessed by scientists. The TermPicks data set includes 39,060 individual terminus traces for 278 glaciers with a mean and median number of traces per glacier of 136 ± 190 and 93, respectively. Across all glaciers, 32,567 dates have been picked, of which 4,467 have traces from more than one author (duplication of 14 %). We find a median error of ∼100 m among manually-traced termini. Most traces are obtained after 1999, when Landsat 7 was launched. We also provide an overview of an updated version of The Google Earth Engine Digitization Tool (GEEDiT), which has been developed specifically for future manual picking of the Greenland Ice Sheet.

A Review of Machine Learning Techniques for Anomaly Detection in Static Graphs

2020 ◽  
pp. 146-162
Author(s):  
Hesham M. Al-Ammal
Keyword(s):  
Machine Learning ◽  
Neural Networks ◽  
Anomaly Detection ◽  
Real Life ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Learning Methods ◽  
Data Set ◽  
Learning Techniques ◽  
Vector Machines

Detection of anomalies in a given data set is a vital step in several applications in cybersecurity; including intrusion detection, fraud, and social network analysis. Many of these techniques detect anomalies by examining graph-based data. Analyzing graphs makes it possible to capture relationships, communities, as well as anomalies. The advantage of using graphs is that many real-life situations can be easily modeled by a graph that captures their structure and inter-dependencies. Although anomaly detection in graphs dates back to the 1990s, recent advances in research utilized machine learning methods for anomaly detection over graphs. This chapter will concentrate on static graphs (both labeled and unlabeled), and the chapter summarizes some of these recent studies in machine learning for anomaly detection in graphs. This includes methods such as support vector machines, neural networks, generative neural networks, and deep learning methods. The chapter will reflect the success and challenges of using these methods in the context of graph-based anomaly detection.

Analysis of Kinase Inhibitors and Druggability of Kinase-Targets Using Machine Learning Techniques

2012 ◽  
pp. 155-165
Author(s):  
S. Prasanthi ◽  
S.Durga Bhavani ◽  
T. Sobha Rani ◽  
Raju S. Bapi
Keyword(s):  
Machine Learning ◽  
Decision Tree ◽  
Kinase Inhibitors ◽  
Kinase Inhibitor ◽  
Classification Problem ◽  
Machine Learning Techniques ◽  
Learning Approaches ◽  
Decision Tree Classifier ◽  
Data Set ◽  
Learning Techniques

Vast majority of successful drugs or inhibitors achieve their activity by binding to, and modifying the activity of a protein leading to the concept of druggability. A target protein is druggable if it has the potential to bind the drug-like molecules. Hence kinase inhibitors need to be studied to understand the specificity of a kinase inhibitor in choosing a particular kinase target. In this paper we focus on human kinase drug target sequences since kinases are known to be potential drug targets. Also we do a preliminary analysis of kinase inhibitors in order to study the problem in the protein-ligand space in future. The identification of druggable kinases is treated as a classification problem in which druggable kinases are taken as positive data set and non-druggable kinases are chosen as negative data set. The classification problem is addressed using machine learning techniques like support vector machine (SVM) and decision tree (DT) and using sequence-specific features. One of the challenges of this classification problem is due to the unbalanced data with only 48 druggable kinases available against 509 non-drugggable kinases present at Uniprot. The accuracy of the decision tree classifier obtained is 57.65 which is not satisfactory. A two-tier architecture of decision trees is carefully designed such that recognition on the non-druggable dataset also gets improved. Thus the overall model is shown to achieve a final performance accuracy of 88.37. To the best of our knowledge, kinase druggability prediction using machine learning approaches has not been reported in literature.

Sign in / Sign up

Export Citation Format

Share Document