Four Point Bend Test of 5LPP – Concrete Coated Pipe

The objective of this paper is to present a 4-point bend test of 5LPP (Five Layer Polypropylene) concrete coated pipe. This is the first of its kind of bend test for a complex coating combination of 5LPP and concrete layers. The bend tests have been carried out to simulate S-Lay installation loading conditions to assess the coating integrity of the pipeline during installation. This paper reports the test arrangements including instrumentation, load schedule, test procedure and the challenges involved. Finally, the preliminary results and conclusions of the tests are documented. Two separate full scale four-point bend tests are carried out to study the behavior of the 5LPP concrete coated pipe. The purpose of the first test is to understand the complex behavior of the 5LPP/CWC coated test pipe and validate previously made industry standard assumptions regarding the calculated coated joint stiffness. The purpose of the second test is to observe the coating integrity of the test joint and slippage behavior due to the simulated installation conditions (overbend and sagbend bending moments and/or corresponding curvatures). The nonlinear moment-curvature for the concrete coated pipe is estimated based on an analytical approach taking into consideration plane bending theory and slippage behavior of the coating layers. The moment-curvature is used to prepare the load schedule for the tests. The test string consists of a test joint (40ft) welded to half joints at the ends. The bend test is performed using industry established full scale 4-point bend test arrangements. A global finite element model is used to simulate the tests using the analytical moment-curvature of the concrete coated pipe. The stiffness of the test pipe is calculated using the first bend test and compared against the analytical stiffness. The second test is carried out by applying loads corresponding to an estimated maximum overbend bending moment and then the test string is unloaded and rebent in opposite direction by applying loads corresponding to an estimated maximum sagbend bending moment. The results of the second test are documented at each load step and the integrity of the coating is measured against specified concrete coating damage criteria for tension as well as compression. Finally, field observations from the actual installation operation are compared against the bend test results. Conclusions are presented to address various aspects of concrete coated pipe for S-Lay installations.