scholarly journals Comparing Results of Time Domain Fatigue Design of Steel Catenary Risers Using Linear and Nonlinear Riser Soil Interaction Models Under Random Waves

2018 ◽  
Author(s):  
Atmaram Muraleedharan ◽  
Mehrdad Kimiae
Keyword(s):  
Time Domain ◽  
Random Waves ◽  
Interaction Models ◽  
Fatigue Design ◽  
Steel Catenary Risers ◽  
Linear And Nonlinear

Coupled Dynamic Analysis for Multi-Unit Floating Offshore Wind Turbine in Maximum Operational and Survival Conditions

2015 ◽  
Author(s):  
H. K. Jang ◽  
H. C. Kim ◽  
M. H. Kim ◽  
K. H. Kim
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Time Domain ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Random Waves ◽  
Mooring Lines ◽  
Floating Offshore Wind Turbine ◽  
Coupled Dynamic Analysis ◽  
Floating Offshore Wind Turbines

Numerical tools for a single floating offshore wind turbine (FOWT) have been developed by a number of researchers, while the investigation of multi-unit floating offshore wind turbines (MUFOWT) has rarely been performed. Recently, a numerical simulator was developed by TAMU to analyze the coupled dynamics of MUFOWT including multi-rotor-floater-mooring coupled effects. In the present study, the behavior of MUFOWT in time domain is described through the comparison of two load cases in maximum operational and survival conditions. A semi-submersible floater with four 2MW wind turbines, moored by eight mooring lines is selected as an example. The combination of irregular random waves, steady currents and dynamic turbulent winds are applied as environmental loads. As a result, the global motion and kinetic responses of the system are assessed in time domain. Kane’s dynamic theory is employed to formulate the global coupled dynamic equation of the whole system. The coupling terms are carefully considered to address the interactions among multiple turbines. This newly developed tool will be helpful in the future to evaluate the performance of MUFOWT under diverse environmental scenarios. In the present study, the aerodynamic interactions among multiple turbines including wake/array effect are not considered due to the complexity and uncertainty.

Effects of Nonlinear Riser-Soil Interaction Model on Fatigue Design of Steel Catenary Riser Under Random Waves

2017 ◽  
Author(s):  
Mehrdad Kimiaei
Keyword(s):  
Oil And Gas ◽  
Structural Response ◽  
Interaction Model ◽  
Nonlinear Behavior ◽  
Random Waves ◽  
Steel Catenary Riser ◽  
Oil And Gas Fields ◽  
Fatigue Design ◽  
Time Histories ◽  
Main Components

Steel Catenary Risers (SCRs) are one of the main components in development of oil and gas fields in deep waters. Fatigue design of SCRs in touch down zone (TDZ) is one of the main engineering challenges in design of riser systems. Nonlinear riser-soil interaction models have recently been introduced and used widely in advanced structural analysis of SCRs. Due to hysteretic nonlinear behavior of the soil, SCR system will show different structural response under different loading time histories. This paper investigates the effects of nonlinear riser-soil interaction in the TDZ on fatigue performance of an example SCR subjected to randomly generated waves. Sensitivity of fatigue life of the system, location of the critical node and the maximum stress range to different wave realizations and different soil types are discussed in detail.

scholarly journals Computation of Nonlinear Hydrodynamic Loads on Floating Wind Turbines Using Fluid-Impulse Theory

2015 ◽  
Author(s):  
Godine Kok Yan Chan ◽  
Paul D. Sclavounos ◽  
Jason Jonkman ◽  
Gregory Hayman
Keyword(s):  
Free Surface ◽  
Green Function ◽  
Wind Turbines ◽  
Time Domain ◽  
The Body ◽  
Nonlinear Loads ◽  
Frequency Wave ◽  
Linear And Nonlinear ◽  
The Time Domain ◽  
Nonlinear Free Surface

A hydrodynamics computer module was developed to evaluate the linear and nonlinear loads on floating wind turbines using a new fluid-impulse formulation for coupling with the FAST program. The new formulation allows linear and nonlinear loads on floating bodies to be computed in the time domain. It also avoids the computationally intensive evaluation of temporal and spatial gradients of the velocity potential in the Bernoulli equation and the discretization of the nonlinear free surface. The new hydrodynamics module computes linear and nonlinear loads — including hydrostatic, Froude-Krylov, radiation and diffraction, as well as nonlinear effects known to cause ringing, springing, and slow-drift loads — directly in the time domain. The time-domain Green function is used to solve the linear and nonlinear free-surface problems and efficient methods are derived for its computation. The body instantaneous wetted surface is approximated by a panel mesh and the discretization of the free surface is circumvented by using the Green function. The evaluation of the nonlinear loads is based on explicit expressions derived by the fluid-impulse theory, which can be computed efficiently. Computations are presented of the linear and nonlinear loads on the MIT/NREL tension-leg platform. Comparisons were carried out with frequency-domain linear and second-order methods. Emphasis was placed on modeling accuracy of the magnitude of nonlinear low- and high-frequency wave loads in a sea state. Although fluid-impulse theory is applied to floating wind turbines in this paper, the theory is applicable to other offshore platforms as well.

Random Waves and Capsize Probability Based on Large Amplitude Motion Analysis

2002 ◽  
Author(s):  
Jan O. de Kat ◽  
Dirk-Jan Pinkster ◽  
Kevin A. McTaggart
Keyword(s):  
Time Domain ◽  
Random Waves ◽  
Extreme Wave ◽  
Small Probability ◽  
Safe Operation ◽  
Short Term ◽  
Physical Behavior ◽  
Wind Climate ◽  
Large Amplitude Motion

The objective of this paper is to apply a methodology aimed at the probabilistic capsize assessment of two naval ships: a frigate and a corvette. Use is made of combined knowledge of the wave and wind climate a ship will be exposed to during its lifetime and of the physical behavior of that ship in the various sea states it is likely to encounter. This includes the behavior in extreme wave conditions that have a small probability of occurrence, but which may be critical to the safe operation of a ship. Time domain simulations provide the basis for deriving short-term and long-term statistics for extreme roll angles. The numerical model is capable of predicting the 6 DOF behavior of a steered vessel in wind and waves, including conditions that may lead to broaching and capsizing.

Impact of Soil Modeling on Fatigue Design of Lazy Wave Riser Systems

2019 ◽  
Author(s):  
Rupak Ghosh ◽  
Haydar Arslan
Keyword(s):  
Fatigue Life ◽  
Water Injection ◽  
Field Testing ◽  
Vertical Displacement ◽  
Soil Response ◽  
Fatigue Design ◽  
Steel Catenary Risers ◽  
Design Requirements ◽  
Seabed Stiffness

Abstract The Liza risers comprise production risers, water injection risers and gas injection risers, and a lazy wave configuration is selected considering FPSO motion, reservoir fluid and overall project execution requirements. During operation, the risers are expected to move cyclically with small vertical displacement amplitudes (e.g. 0.1% to 1% of the riser diameter), and a key design issue is the fatigue life of these risers at critical locations including the touch-down zone which will be governed by the seabed stiffness. The role of soil response on fatigue life of riser with buoyancy has been investigated through nonlinear finite element and comprehensive lab and field testing program. Published methodologies for determining seabed stiffness values for risers concentrate more on larger amplitude motions based on the design requirements of steel catenary risers. The paper presents the sensitivity of the fatigue life at TDP to various soil model and provides insight in the results. Also included is the importance of site specific soil investigation in the context of design of riser.

Strength and Fatigue Performance of Steel Lazy Wave Risers With Change in Configuration Parameters

2019 ◽  
Author(s):  
Mayank Lal ◽  
Feng Wang ◽  
Xiaohua Lu ◽  
Abhilash Sebastian
Keyword(s):  
Deep Water ◽  
Parametric Study ◽  
Fatigue Performance ◽  
Design Criteria ◽  
Cost Assessment ◽  
Fatigue Design ◽  
Design Variables ◽  
Steel Catenary Risers ◽  
Normative Cost ◽  
The Impact

Abstract Steel Lazy wave risers are being increasingly used for deep water applications due to better strength and fatigue performance in the touchdown zone compared to steel catenary risers. Several parameters govern the design of steel lazy wave risers including the length of the catenary from hang-off to start of buoyancy section and the length of the buoyancy section. In this paper, a parametric study is performed to investigate the trends in strength and fatigue performance of steel lazy wave risers with change in configuration parameters. A normative cost assessment is also performed to show the impact of these design variables on overall cost of the system. Dynamic analysis is performed to check the change in strength and fatigue performance of steel lazy wave risers as the configuration parameters are changed. The results from the parametric study will assist in designing steel lazy wave risers which satisfy the strength and fatigue design criteria.

Sign in / Sign up

Export Citation Format

Share Document